VND7E050AJTR vs VNQ660SPTR-E 对比
详细并排对比 VND7E050AJTR 出自 STMicroelectronics 和 VNQ660SPTR-E 出自 STMicroelectronics。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
STMicroelectronics
VNQ660SPTR-E - Quad 6A High-Side Smart Power Switch | STMicroelectronics
VNQ660SPTR-E ✓ 量产中规格对比
| 参数 | VND7E050AJTR | VNQ660SPTR-E |
|---|---|---|
| 品牌 | STMicroelectronics | STMicroelectronics |
| 分类 | Motor Drivers | Power MOSFET Drivers |
| 生命周期状态 | 有效 | 有效 |
| 库存状态 | 有库存 | 有库存 |
| 单价（USD） | $1.68 | $5.37 |
| 拓扑 | Dual-channel high-side driver (HSD) | — |
| Technology | STMicroelectronics VIPower M0-7 | ST VIPower M0-3 (vertical DMOS) |
| Number of Channels | 2 | 4 |
| Continuous Load Current per Channel | 50 A | — |
| Operating Voltage (VCC) | 4 V to 28 V (automotive 12 V nominal) | — |
| Logic Input Compatibility | 3 V and 5 V CMOS | — |
| Standby Current | [DATA_NEEDED: standby current value] | — |
| On-State Resistance (Ron) per Channel | [DATA_NEEDED: Ron value] | — |
| Current Sense Output | Analog multiplexed CS pin (load current, VCC, temperature) | — |
| Fault Reset (FaultRST) | Active-low CMOS-compatible input | — |
| Protections | Load current limitation, overload active power limitation, overtemperature shutdown with configurable latch-off, reverse battery, load dump | — |
| Diagnostics | Open-load, short-to-ground, short-to-VCC, overload, overtemperature | — |
| 封装 | PowerSSO-16 (16-pin exposed-pad) | PowerSO-10 with exposed bottom pad |
| 工作温度 | -40 C to +150 C junction | -40 C to +125 C |
| Automotive Qualification | AEC-Q100 targeted (VND7E050AJ family automotive grade) | — |
| 安装类型 | Surface Mount | Surface Mount |
| RoHS 状态 | Compliant | Compliant |
| 功能 | — | Quad-channel high-side solid-state relay |
| Switch Type | — | High-side N-channel power MOSFET |
| Supply Voltage (VCC) | — | 6 V to 36 V |
| Maximum Continuous Output Current (per channel) | — | 6 A |
| On-State Resistance (RDS(on)) | — | 40 mOhm typical (per channel) |
| Input Compatibility | — | CMOS logic-level inputs |
| Protection Features | — | Thermal shutdown, overvoltage clamp, undervoltage shutdown, open-load detection (off state), reverse battery protection |
| Status Feedback | — | Analog status flag per channel |
| Off-State Quiescent Current | — | [DATA_NEEDED: standby Iq] |
| Maximum Power Dissipation | — | 113.6 W (with proper thermal design) |