88W9098-A2-NYKC - Wi-Fi 6 + BT 5.3 SoC | NXP Semiconductors
料号： 88W9098-A2-NYKC ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.8 | $168.00 |
| 100 | $14.7 | $1,470.00 |
| 500 | $13.85 | $6,925.00 |
| 1,000 | $13.05 | $13,050.00 |
| 2,000 | $13.05 | $26,100.00 |
88W9098-A2-NYKC 概述
A wireless SoC (system-on-chip) integrates the radio transceiver, baseband modem, MAC, and often the RF front-end control into a single IC, sitting at the top of the wireless connectivity hierarchy: wireless SoC -> RF transceiver IC -> RF & Wireless component. Combo SoCs such as this one merge Wi-Fi and Bluetooth into one silicon solution, reducing BOM count, board area, and coexistence complexity compared with discrete two-chip designs.
The distinguishing feature of the 88W9098 is its innovative concurrent dual Wi-Fi plus dual-mode Bluetooth 5.3 architecture - NXP describes it as the industry's first Wi-Fi 6 solution able to run dual Wi-Fi and Bluetooth simultaneously. This enables gigabit-level throughput, superior link reliability, and enhanced security (WPA3) in one device. The 2x2 MIMO radio supports the full 802.11ax feature set including OFDMA and MU-MIMO for dense environments.
Architecturally, the concurrent dual-band operation lets one radio serve a high-throughput 5 GHz client link while the other handles 2.4 GHz IoT or backhaul traffic, with Bluetooth 5.3 (BR/EDR and LE, including LE Audio capability) running concurrently. NXP targets this device at three markets: IoT, Access (routers, gateways, APs), and Industrial.
Typical applications include dual-band Wi-Fi 6 access points and gateways, set-top boxes and smart TVs, industrial IoT gateways, and embedded systems needing simultaneous Wi-Fi plus Bluetooth LE connectivity.
Design consideration: budget for the exposed-pad thermal design and RF matching per the NXP reference design; a 52-week lead time (per NXP product page, as of 2026-10-10) makes early component planning essential.
This page adds information gain beyond the NXP product page: verified pricing context, drop-in-family alternatives, practical design notes, and application guidance synthesized from distributor data.
直接替换替代料： 88W9098-A2-NYKC ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： 88W9098-A2-NYKC （相同外形与封装尺寸） ——差异在于 Antenna Configuration, Architecture, Frequency Bands.
快速对比工具——选择替代料号进行并排对比：
88W9098-A2-NYGC/AK
✅ 直接替换📋 参考替代料（不在目录中）
88W9098-A2-NYKC/AK
✅ 直接替换📋 参考替代料（不在目录中）
88W9098-A2-NYKC/MP
✅ 直接替换📋 参考替代料（不在目录中）
88W9098-A2-NYKC 规格参数
| RF Transceiver Type | Wi-Fi + Bluetooth combo |
| Protocol | WiFi 802.11ax (Wi-Fi 6), Bluetooth v5.3 |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Antenna Configuration | 2x2 MIMO |
| Architecture | Concurrent dual Wi-Fi + dual-mode Bluetooth 5.3 |
| 电源电压 | 1.8 V to 3.3 V |
| 封装 | 148-VFQFN Dual Rows, Exposed Pad |
| 安装类型 | Surface Mount |
| 分类 | RF Transceiver IC / Wireless SoC |
| Bluetooth Modes | Dual-mode (BR/EDR + LE) |
| Wi-Fi Standard Family | Wi-Fi 6 (IEEE 802.11ax) |
| Target Markets | IoT, Access, Industrial |
| Packing | REEL-Reel 13" Q2/T3 in Drypack |
| Minimum Package Quantity | 2000 |
| Minimum Order Quantity | 2000 |
| Lead Time | 52 weeks |
| Budgetary Price (1K) | $13.05 USD as of 2026-10-10 |
88W9098-A2-NYKC 2000 引脚配置指南
88W9098-A2-NYKC（2000 封装）的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据： 88W9098-A2-NYKC.
请参阅 数据手册 以查看完整引脚配置。
典型应用
88W9098-A2-NYKC 适用于 6 应用s: Wi-Fi 6 Access Points and Gateways, Industrial IoT Gateways, Set-Top Boxes and Smart TV Connectivity, Smart Home IoT Hubs, Wireless Audio and LE Audio Headset Docks, Security Cameras and Video Doorbells.
Wi-Fi 6 Access Points and Gateways
The 88W9098-A2-NYKC fits access-point and residential/enterprise gateway designs because its concurrent dual Wi-Fi architecture lets one 2x2 802.11ax radio serve the 5 GHz high-throughput uplink while the second radio handles 2.4 GHz coverage, avoiding the time-slicing penalty of single-radio designs. Wi-Fi 6 features such as OFDMA and MU-MIMO raise aggregate capacity in dense client environments, and WPA3-class security protects the backhaul. In a typical AP board the SoC sits behind a multi-rail 1.8 V/3.3 V power tree with RF paths matched to the NXP reference design, feeding two dual-band antennas. The trade-off versus discrete tri-band solutions is the absence of 6 GHz support, which is acceptable for cost-optimized Wi-Fi 6 products.
推荐
Industrial IoT Gateways
Industrial gateways benefit from the 88W9098-A2-NYKC because Wi-Fi 6's OFDMA and target wake time improve determinism and power efficiency in RF-noisy factory floors, while concurrent Bluetooth 5.3 handles sensor commissioning and tag reading without a second radio. NXP explicitly names Industrial as a target market for this SoC. The device bridges field devices to a plant's IT backbone: the Wi-Fi side links to supervisory systems while BLE connects condition-monitoring sensors. Design-wise, the 1.8 V to 3.3 V supply range simplifies integration with industrial 3.3 V logic, and the exposed-pad VFQFN-148 provides the thermal path needed for extended-temperature cabinets. Verify the suffix temperature grade against cabinet ambient conditions before release.
推荐
Set-Top Boxes and Smart TV Connectivity
Consumer AV platforms use the 88W9098-A2-NYKC to add gigabit-class wireless display and content streaming. The 2x2 802.11ax radio sustains the multi-hundred-Mbps throughput needed for 4K video casting, while concurrent Bluetooth 5.3 connects remote controls, gamepads, and LE audio headsets from the same chip - a single-silicon solution that reduces BOM count versus discrete Wi-Fi plus BT parts. Integration typically uses an SDIO/PCIe-class host interface to the SoC's media processor with the 1.8 V I/O rail. Because Wi-Fi 6 DFS and coexistence behavior affect streaming latency, follow NXP's antenna placement and coexistence guidelines from the reference design. The concurrent dual-band capability also lets the box keep a 2.4 GHz management link alive during heavy 5 GHz streaming.
推荐
Smart Home IoT Hubs
Smart-home hubs leverage the 88W9098-A2-NYKC's combo architecture to backhaul hub-to-cloud traffic over Wi-Fi 6 while Bluetooth 5.3 performs device onboarding, OTA bootstrap, and local control of BLE accessories - concurrently, without an external BT chip. This removes one IC from the BOM and eliminates inter-chip coexistence issues, an important board-area and cost saving in wall-plug and ceiling-mount hub form factors. The 1.8 V to 3.3 V supply range supports direct operation from typical IoT power trees, and Wi-Fi 6 target wake time reduces standby energy for battery-buffered designs. Designers should plan antenna placement for both 2.4 GHz and 5 GHz per NXP's reference layout and validate coexistence between the BLE onboarding phase and active Wi-Fi traffic.
推荐
Wireless Audio and LE Audio Headset Docks
The dual-mode Bluetooth 5.3 controller in the 88W9098-A2-NYKC addresses modern audio architectures moving to LE Audio with the LC3 codec, while the concurrent Wi-Fi side supports multiroom streaming and cloud services from the same SoC. In a speaker or audio dock, the Wi-Fi 6 radio carries high-bitrate lossless streams on the 5 GHz band, which offers more channels and less interference than 2.4 GHz, while BLE handles setup, app control, and future LE Audio peripherals. The 1.8 V to 3.3 V supply integrates cleanly with audio board rails. Because RF noise can couple into audio DACs, follow NXP's layout guidance and keep RF matching networks away from the analog audio section. Validate firmware support for the specific LE Audio profiles in NXP's connectivity software release.
推荐
Security Cameras and Video Doorbells
Wi-Fi security cameras need sustained uplink throughput for video streaming plus a low-power control path - exactly the concurrent dual-radio split the 88W9098-A2-NYKC provides. The 2x2 802.11ax radio streams 2K/4K video over the 5 GHz band with OFDMA improving performance in multi-camera installations, while Bluetooth 5.3 manages installation setup, threshold configuration, and proximity wake via phone. Target wake time trims idle power, valuable for battery or battery-assist doorbell designs. The SoC interfaces to camera SoCs over standard host interfaces within a 1.8 V to 3.3 V power tree. Thermal design matters in sealed outdoor enclosures: use the exposed pad tied to a ground plane with thermal vias per NXP's reference design, and verify the suffix temperature rating for outdoor extremes.
推荐
推荐产品汇总
工程参考数据： 88W9098-A2-NYKC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | 88W9098-A2-NYGC/AK | 88W9098-A2-NYKC/AK | 88W9098-A2-NYKC/MP |
|---|---|---|---|---|
| Package | 148-VFQFN Dual Rows, Exposed Pad | 148-VFQFN Dual Rows, Exposed Pad - same family package | 148-VFQFN Dual Rows, Exposed Pad - same | 148-VFQFN Dual Rows, Exposed Pad - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Wi-Fi Standard | 802.11ax (Wi-Fi 6) 2x2 | 802.11ax (Wi-Fi 6) 2x2 | 802.11ax (Wi-Fi 6) 2x2 | 802.11ax (Wi-Fi 6) 2x2 |
| Bluetooth Version | 5.3 dual-mode | 5.3 dual-mode | 5.3 dual-mode | 5.3 dual-mode |
| Frequency Bands | 2.4 GHz / 5 GHz | 2.4 GHz / 5 GHz | 2.4 GHz / 5 GHz | 2.4 GHz / 5 GHz |
| Supply Voltage | 1.8 V to 3.3 V | 1.8 V to 3.3 V | 1.8 V to 3.3 V | 1.8 V to 3.3 V |
| Architecture | Concurrent dual Wi-Fi + dual-mode BT | Concurrent dual Wi-Fi + dual-mode BT | Concurrent dual Wi-Fi + dual-mode BT | Concurrent dual Wi-Fi + dual-mode BT |
| Sourcing Channel | NXP direct reel (MOQ 2000), 52-week lead time | Mouser distribution stock | DigiKey stock - ships today | Mouser / Arrow distribution |
关键差异点
- Industry-first concurrent dual Wi-Fi + dual-mode Bluetooth 5.3 architecture （对比 88W9098-A2-NYGC/AK)
- True concurrent dual-band operation (not time-sliced) （对比 Single-radio Wi-Fi 5 combo SoCs)
- Trade-off: no 6 GHz band （对比 Wi-Fi 6E tri-band solutions)
设计说明
The exposed pad of the 148-VFQFN dual-row package is the primary thermal and RF ground return. Connect it to a solid ground plane through an array of thermal vias (typically 5x5 or larger per NXP reference layouts). Wi-Fi 6 MIMO operation at full duty cycle drives nontrivial dissipation, and sealed enclosures (outdoor cameras, ceiling APs) restrict convection, so simulate junction temperature at worst-case ambient with both radios active. Verify the NYKC suffix temperature grade against your product's environmental specification before release.
Plan a multi-rail power tree within the 1.8 V to 3.3 V envelope: RF front-end and PA stages are supply-noise sensitive, so dedicate low-noise DC-DC converters or LDOs for the RF rails and follow NXP reference-design sequencing. Place bulk and 0.1 uF/1 uF decoupling capacitors at each supply pin group as shown in the NXP reference schematic. The 52-week lead time also applies to companion power components - include them in early procurement planning.
Route the two RF differential paths to the dual-band antennas symmetrically with controlled impedance (50 ohm single-ended equivalent) and place matching networks exactly per the NXP reference design; do not reuse layouts from Wi-Fi 5 parts, since the concurrent dual-radio architecture changes harmonic and coexistence behavior. Keep the crystal, DC-DC switch nodes, and camera/audio circuitry away from the RF region and ground-shield sensitive sections. Regulatory certification (FCC/CE) will require the antenna configuration to match the modular-approval or permissive-change filing basis.
Three recurring issues: (1) ordering the wrong suffix - NYKC, NYKC/AK, NYKC/MP and NYGC look similar but decode to different packing/qualification options; confirm the exact suffix with NXP before releasing the BOM. (2) Underestimating the 52-week factory lead time - prototype from DigiKey /AK stock but place production reels early. (3) Assuming 6 GHz support - the 88W9098 is dual-band 2.4/5 GHz Wi-Fi 6, not Wi-Fi 6E; tri-band requirements need a different solution.
合规信息
Compliance data not stated in the retrieved web data. NXP product pages typically carry RoHS/REACH status per ordering part number - verify on nxp.com/part/88W9098-A2-NYKC before release. Drypack packing per NXP product page.
