A3P060-FGG144 - 700-LE ProASIC3 FPGA, 144-LBGA | Microchip
料号: A3P060-FGG144 ✓ 量产中A3P060-FGG144 概述
A field-programmable gate array is a programmable logic device that converts a digital design into an integrated circuit by configuring internal logic, routing, and I/O resources. The ProASIC3 family occupies the FPGA level of the programmable-logic hierarchy and provides system performance and configuration features intended for industrial control, communications, networking, consumer, and embedded applications.
The A3P060-FGG144 provides 1,536 configurable logic blocks, equivalent to 700 logic elements or 60,000 equivalent gates. Its 96 user I/O support interfaces to external memory, control signals, communications peripherals, and mixed-signal subsystems. Flash configuration supports repeated programming without a separate external configuration PROM, while a 144-ball package and 1.0 mm terminal pitch support dense board layouts.
The A3P060-FGG144 is manufactured on a 130 nm CMOS process and operates from a nominal 1.5 V core supply. These details place it in the conventional ProASIC3 architecture, where low static power and deterministic flash configuration are central design considerations. Designers must still observe the device-specific AC timing, I/O standards, power sequencing, and configuration requirements in the manufacturer documentation.
Typical uses include industrial automation, communications interfaces, embedded control systems, and compact logic platforms. The 96-I/O count is useful for systems needing multiple external buses or peripheral connections, while the 144-LBGA footprint reduces board area compared with larger leaded packages. A final design should verify every assigned pin against the package ball map and confirm that the selected clock and I/O operating modes meet system timing.
A critical design step is to program the configuration before enabling dependent logic and to preserve correct JTAG access during production and debug. Board layouts should provide clean power and ground distribution, route configuration and programming signals away from high-speed data paths, and follow the manufacturer’s BGA assembly requirements for thermal performance and soldering.
This product record combines the exact A3P060-FGG144 ordering information with family-level architecture details, same-family drop-in options, procurement data, and practical implementation guidance. It is intended to help engineers identify the correct ProASIC3 device, distinguish grade and suffix variants, and plan PCB, configuration, and lifecycle decisions before committing a design to production.
直接替换替代料: A3P060-FGG144 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: A3P060-FGG144 (相同外形与封装尺寸) ——差异在于 Configuration Memory, Device Type, Logic Elements, Package.
A3P060-FGG144I
✅ 直接替换📋 参考替代料(不在目录中)
A3P060-FGG144II
✅ 直接替换📋 参考替代料(不在目录中)
A3P060-FGG144C
✅ 直接替换📋 参考替代料(不在目录中)
A3P060-FGG144IY
✅ 直接替换📋 参考替代料(不在目录中)
A3P060-1FGG144
✅ 直接替换📋 参考替代料(不在目录中)
A3P060-FGG144 最大额定值与电气特性
| Device Type | ProASIC3 flash field-programmable gate array |
| Logic Elements | 700 LE |
| Configurable Logic Blocks | 1536 CLB |
| Equivalent Gates | 60000 gates |
| User I/O | 96 I/O |
| 最大时钟频率 | 231 MHz |
| Core Supply Voltage | 1.5 V |
| Process Technology | 130 nm CMOS |
| 封装 | 144-ball low-profile grid array |
| Terminal Pitch | 1.0 mm |
| 安装类型 | Surface mount |
| Configuration Memory | Flash |
| Programming Interface | JTAG |
| Packaging | Tray |
| Lead Time | 12 weeks |
| 生命周期状态 | Active |
| RoHS 状态 | ROHS3 compliant |
A3P060-FGG144 144-ball low-profile grid array 引脚配置指南
A3P060-FGG144(144-ball low-profile grid array 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: A3P060-FGG144.
请参阅 数据手册 以查看完整引脚配置。
典型应用
A3P060-FGG144 适用于 6 应用s: Industrial Automation Controllers, Communications Interface and Protocol Bridging, Embedded Control and System Sequencing, Sensor Acquisition and Signal Conditioning, Consumer and Accessory Logic, Data Acquisition and Test Equipment.
Industrial Automation Controllers
The A3P060-FGG144 fits compact automation logic that coordinates sensors, actuators, interlocks, and communications between field equipment. Its 700 logic elements provide useful capacity for state machines, protocol conversion, timing logic, and supervisory control, while 96 user I/O reduce the need for external buffers when several buses or discrete signals must terminate on the FPGA. The 144-ball package also supports compact board construction. A practical implementation assigns only the required pins, keeps configuration programming accessible, and confirms the 231 MHz maximum frequency against the worst-case clock path. Industrial products must also verify operating-temperature limits, isolation boundaries, surge protection, and the appropriate A3P060 suffix for the installation environment.
推荐
Communications Interface and Protocol Bridging
The A3P060-FGG144 can implement protocol converters, packet classifiers, and interface isolation logic where programmable parallelism is more useful than a fixed microcontroller function. Its 700 logic elements and 96 I/O allow multiple clock domains, framing logic, and data buffers to coexist, while the 231 MHz maximum operating frequency provides margin for moderately demanding serial interfaces. Keep unrelated high-speed signals separated from JTAG and configuration routing, and constrain each clocking domain explicitly during implementation. Signal integrity depends on controlled impedance, continuous return paths, and careful BGA escape routing. Before using the device as a direct interface replacement, confirm that its supported I/O standards, input thresholds, output characteristics, and timing match the physical link.
推荐
Embedded Control and System Sequencing
The A3P060-FGG144 is useful when a design needs deterministic power sequencing, watchdog behavior, bus arbitration, or hardware interlocks around a host processor. The FPGA can supervise multiple enable signals and fault inputs in parallel, using its 96 I/O to connect control and status lines while the processor handles higher-level software. A robust partition keeps critical timing paths inside the FPGA, defines reset and startup states explicitly, and uses configuration flash to preserve known logic after power cycling. Program through JTAG during manufacturing and validation, then protect or selectively expose the interface in the final product. This architecture is especially helpful where a software-only sequence would make fault diagnosis or precise timing difficult.
推荐
Sensor Acquisition and Signal Conditioning
The A3P060-FGG144 can implement digital filtering, channel selection, calibration logic, and timestamp alignment around analog front ends. Its 700 logic elements are well suited to parallel sampling control and moderate digital signal processing, while 96 I/O provide connections to converters, sensors, and status signals. The 231 MHz maximum frequency allows common control and filtering pipelines to operate with timing margin when constrained correctly. Keep high-impedance analog nodes away from FPGA ball escapes and provide separate, well-decoupled supplies for sensitive converters. Use the exact package pin definitions to identify supply, ground, and user I/O balls. The FPGA should complement the analog front end rather than replace its low-noise, reference, and input-bandwidth functions.
推荐
Consumer and Accessory Logic
The A3P060-FGG144 can implement compact control logic in consumer accessories, interface adapters, and multifunction products that benefit from field programmability. With 700 logic elements and 96 I/O, it can combine user-interface control, status indication, peripheral arbitration, and protocol translation without relying on several fixed-function devices. The 144-ball package helps reduce board area, although BGA assembly and inspection require suitable production capability. Designers should establish boot behavior for an unconfigured device, prevent unwanted I/O activity until initialization is complete, and validate all external connections against the package ball map. For cost-driven consumer products, check the exact grade, temperature range, and configuration requirements before approving the device for volume production.
推荐
Data Acquisition and Test Equipment
The A3P060-FGG144 fits data-acquisition front ends, logic testers, and programmable measurement platforms where multiple channels must be sampled or interpreted consistently. The 96 I/O can support trigger inputs, status flags, converter interfaces, and timing controls, while the 700 logic elements can implement counters, acquisition state machines, and digital filtering. The 231 MHz maximum operating frequency is sufficient for many control and data-path tasks when timing paths are properly constrained and verified after place-and-route. Keep sensitive analog and reference circuitry away from digital return-current discontinuities, and use the BGA power and ground balls as the manufacturer specifies. Calibration data, trigger latency, and configuration integrity should be validated across voltage and temperature conditions before the module is used for measurement results.
推荐
推荐产品汇总
工程参考数据: A3P060-FGG144 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | A3P060-FGG144I | A3P060-FGG144II | A3P060-FGG144C | A3P060-FGG144IY | A3P060-1FGG144 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-ball low-profile grid array | 144-ball low-profile grid array | 144-ball low-profile grid array | 144-ball low-profile grid array | 144-ball low-profile grid array | 144-ball low-profile grid array |
| Logic Elements | 700 LE | 700 LE | 700 LE | 700 LE | 700 LE | 700 LE |
| Equivalent Gates | 60000 gates | 60000 gates | 60000 gates | 60000 gates | 60000 gates | 60000 gates |
| Configurable Logic Blocks | 1536 CLB | 1536 CLB | 1536 CLB | 1536 CLB | 1536 CLB | 1536 CLB |
| User I/O | 96 I/O | 96 I/O | 96 I/O | 96 I/O | 96 I/O | 96 I/O |
| Configuration Memory | Flash | Flash | Flash | Flash | Flash | Flash |
关键差异点
- Matches the A3P060 resource profile in a 144-ball package (对比 A3P060-FGG144I)
- Maintains the same 144-ball family footprint across grade options (对比 A3P060-FGG144II)
- Supports pin-compatible sourcing within the ProASIC3 family (对比 A3P060-FGG144C)
设计说明
Base the land pattern on the manufacturer’s 144-ball low-profile grid-array drawing rather than a generic BGA footprint. The listed terminal pitch is 1.0 mm, but ball size, pad diameter, solder-mask opening, and paste volume must also come from that drawing. Route JTAG and configuration signals away from high-speed nets, maintain uninterrupted reference planes below the device, and provide accessible power and ground balls for both normal operation and configuration.
Design the 1.5 V core rail around the worst-case static and dynamic current produced by the actual configuration and I/O loading. The 130 nm process identifies the technology generation, but it does not by itself determine final dissipation. Separate the core and any external I/O supply requirements, follow the manufacturer’s voltage limits and startup sequence, and verify decoupling placement directly at the relevant power and ground balls to control loop area and supply noise.
Do not treat every A3P060-FGG144 suffix as electrically identical. The I, II, C, and IY variants are same-footprint candidates, but their grade and temperature distinctions can change whether they are acceptable in the target environment. Before substitution, compare the exact device table, operating-temperature range, frequency grade, electrical limits, and pin descriptions. Also verify that the replacement configuration bitstream and programmer settings match the selected ordering code.
Constrain every clock domain and treat JTAG access as a deliberate board feature rather than an afterthought. Use short, continuous return paths for high-speed signals, avoid routing configuration or programming nets beneath noisy analog regions, and apply the package-specific I/O timing constraints during implementation. After place-and-route, inspect worst-case timing and power-distribution paths rather than relying only on the stated 231 MHz maximum clock frequency.
合规信息
The exact A3P060-FGG144 product record identifies an ROHS3-compliant status. No separate REACH, halogen-free, or conflict-minerals declaration is stated for this ordering code.