A3P060-VQ100 - 60K Gate 231MHz FPGA | Microchip Technology
料号: A3P060-VQ100 ✓ 量产中A3P060-VQ100 概述
A ProASIC3 FPGA is a user-programmable semiconductor that combines configurable logic, flip-flop resources, memory, and programmable I/O in one device. Within the product hierarchy, it is an FPGA, a programmable logic device, and a semiconductor. Flash configuration technology allows the device to retain its programmed configuration without requiring a separate configuration PROM after programming, making it suitable for compact embedded systems that need field updates or repeated logic revisions.
Key characteristics include a 1.5 V core supply, CMOS logic, 60,000 system gates, and a 100-pin VQFP package. The ProASIC3 architecture provides up to 144 kbits of True Dual-Port SRAM according to the family documentation excerpt, while the listed user-I/O count of 71 supports interfaces to external processors, memories, converters, and communications circuits. Its 130 nm, seven-layer-metal implementation reflects the process generation used for the ProASIC3 family.
The A3P060-VQ100 occupies the low-density end of the ProASIC3 range while offering substantially more logic than small CPLDs. It is suitable for control logic, protocol bridging, peripheral consolidation, and embedded signal-processing functions that require parallel programmable resources. A design must still verify the exact timing, I/O standard, supported I/O count, and pin assignment for the selected package in the Microchip device documentation.
Typical uses include industrial control modules, data-acquisition front ends, communications equipment, embedded instrumentation, and compact embedded-processing subsystems. In these applications, the 71 listed I/Os allow the FPGA to connect sensors, converters, memories, and serial transceivers while internal logic blocks implement buffering, state machines, arithmetic, and protocol handling.
A key design consideration is supply decoupling and pin-compatible planning. Place the required capacitors near the power and ground pins, respect the documented I/O voltage limits, and use the manufacturer pin-assignment table to assign every VQFP lead. Programming tools, device configuration files, and the correct A3P060 device selection must also be coordinated before placing the component in production.
This page organizes the A3P060-VQ100's principal electrical, logical, packaging, and application characteristics while separating documented functions from parameters that still require project-specific verification. It also provides engineering-focused comparison points and drop-in candidates identified from the same ProASIC3 family.
直接替换替代料: A3P060-VQ100 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: A3P060-VQ100 (相同外形与封装尺寸) ——差异在于 Package Type, Configuration Memory, Mounting Type, Configuration Technology, Device Type.
A3P060-VQG100I
✅ 直接替换✓ 有现货
$6.95 / 个
查看数据手册 →A3P060-1VQG100T
✅ 直接替换联系询价
查看数据手册 →A3PN060-VQG100
✅ 直接替换📋 参考替代料(不在目录中)
A3P060-VQ100 最大额定值与电气特性
| Device Type | ProASIC3 flash-based FPGA |
| System Gates | 60,000 gates |
| Logic Cells / Logic Blocks | 1,536 |
| Internal Frequency | 350 MHz |
| Catalog Performance Grade | 231 MHz |
| Core Voltage | 1.5 V |
| Logic Technology | CMOS, 130 nm |
| Metal Layers | 7 layers, including 6 copper layers |
| User I/O | 71 I/Os |
| Maximum SRAM | 144 kbits True Dual-Port SRAM |
| Package Type | VQFP-100 |
| Package Dimensions | 14 x 14 mm |
| Package Height | 1 mm |
| Lead Pitch | 0.50 mm |
| 引脚数量 | 100 pins |
| Configuration Memory | Flash |
| 安装类型 | Surface mount |
A3P060-VQ100 1 mm 引脚配置指南
A3P060-VQ100(1 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: A3P060-VQ100.
请参阅 数据手册 以查看完整引脚配置。
典型应用
A3P060-VQ100 适用于 6 应用s: Industrial Control Logic, Data Acquisition Front End, Communications Interface Consolidation, Embedded Instrumentation, Sensor and Condition Monitoring, Protocol and Test Equipment.
Industrial Control Logic
The A3P060-VQ100 fits compact industrial controllers that need programmable sequencing, state-machine logic, and multiple external interfaces. Its 1,536 listed logic cells or logic blocks provide substantially more parallelism than a basic CPLD, while the 71 listed user I/Os can connect sensors, actuator drivers, status indicators, and communications transceivers. The 1.5 V core reduces the complexity of integrating the FPGA with modern low-voltage system electronics, although each I/O still requires verification against its assigned voltage class. Flash configuration also supports field programming and configuration retention without a separate configuration memory device. For production designs, engineers should validate timing at the intended clock rate, apply manufacturer power and decoupling requirements, and program a conservative pin-assignment strategy that leaves adequate routing flexibility around the 0.50 mm-pitch VQFP footprint.
推荐
Data Acquisition Front End
The A3P060-VQ100 is suitable for data-acquisition modules that must collect parallel sensor data, perform digital filtering, and coordinate conversions. Its programmable logic can implement channel multiplexing, trigger pipelines, calibration tables, counters, and data formatting without forcing those tasks into a microcontroller. The 71 listed user I/Os provide connections for converters, memory devices, digital control lines, and status signaling, while the documented family capability of up to 144 kbits of True Dual-Port SRAM supports local buffering and dual-port data movement. Because the exact I/O voltage limits and available banks vary by assigned pin, the design should establish converter interfaces before final logic placement. Designers should also use manufacturer timing guidance to pipeline acquisition stages and check that the selected 231 MHz catalog grade satisfies the system clocking plan.
推荐
Communications Interface Consolidation
The A3P060-VQ100 can consolidate several narrow communication interfaces around a processor or programmable controller. Its 60,000-system-gate ProASIC3 resource can implement byte- and bit-level protocol handling, FIFOs, clock-domain interfaces, and status checks in parallel. The 100-pin VQFP package exposes 71 listed user I/Os, leaving enough connectivity for several transceivers, memories, and control signals when the board-level pin plan is compact. Flash-based configuration is valuable in communications equipment because firmware and interface behavior can be revised during production without relying on a separate boot PROM. Engineers should use the manufacturer I/O standards and pin-assignment rules to establish voltage compatibility, then apply the ProASIC3 timing constraints for each clock domain. The 231 MHz catalog grade must be checked against all internal clock requirements rather than used as a blanket timing promise.
推荐
Embedded Instrumentation
The A3P060-VQ100 is appropriate for embedded instrumentation that combines control, measurement sequencing, and data formatting in a small package. Internal programmable logic can manage instrument commands, interpret switch and sensor inputs, sequence measurements, calculate corrections, and prepare results for a host interface. Its 71 listed user I/Os support front-panel controls, displays, converters, and external memory, while flash configuration permits configuration updates across an instrument's production life. The 14 x 14 mm VQFP package is useful for compact boards, although its 0.50 mm lead pitch requires careful PCB assembly and inspection. A robust design should reserve pins for critical interfaces, verify the configured I/O voltage limits, and separate sensitive analog routing from digital control paths. Timing closure should be performed with the actual Microchip tool flow and device speed designation before release.
推荐
Sensor and Condition Monitoring
The A3P060-VQ100 can act as the programmable coordination layer in a sensor and condition-monitoring module. Its programmable fabric can debounce digital inputs, count events, apply threshold logic, combine readings from multiple channels, and generate local alarm outputs without a separate high-performance processor. The 71 user I/Os provide connections for sensors, switches, memory, and communications hardware, while the ProASIC3 family's True Dual-Port SRAM capability supports simultaneous access to local data buffers. Flash configuration allows the monitoring behavior to be revised without removing the device from the finished assembly. System designers should avoid assuming that every package lead supports every voltage standard and should use the manufacturer pin-description tables to assign banks deliberately. Power-supply integrity, thermal behavior, and watch-dog recovery paths should also be validated for the complete monitoring system.
推荐
Protocol and Test Equipment
The A3P060-VQ100 is useful in compact protocol exercisers and automated test equipment where programmable sequencing is needed around a processor or tester. The 1,536 listed logic cells or logic blocks can implement pattern generators, response checkers, programmable delays, and interface adapters concurrently. With 71 listed user I/Os, the device can connect test pins, status outputs, memories, and trigger circuitry, and flash configuration supports repeatable product updates. The 231 MHz catalog performance permits many designs to operate from moderate internal clocks, but every clock path must still be constrained using the selected device grade and pin assignments. Engineers should isolate input and output timing paths, use the manufacturer's constraints for each I/O standard, and verify power sequencing and decoupling on the 1.5 V core supply. The 100-pin VQFP also requires assembly controls suited to its 0.50 mm pitch.
推荐
推荐产品汇总
工程参考数据: A3P060-VQ100 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | A3P060-VQG100 | A3P060-1VQG100 | A3PN060-VQG100 |
|---|---|---|---|---|
| Package | VQFP-100, 14 x 14 mm, 0.50 mm pitch | VQFP-100, 14 x 14 mm, 0.50 mm pitch | VQFP-100, 14 x 14 mm, 0.50 mm pitch | VQFP-100, 14 x 14 mm, 0.50 mm pitch |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| FPGA Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 N-bearing variant |
| System Gates | 60,000 gates | 60,000 gates | 60,000 gates | 60,000 gates |
| User I/O | 71 I/Os | 71 I/Os | 71 I/Os | 71 I/Os |
| Pin Count | 100 pins | 100 pins | 100 pins | 100 pins |
| Configuration Memory | Flash | Flash | Flash | Flash |
关键差异点
- Maintains the same listed 71-I/O ProASIC3 integration point (对比 A3P060-VQG100)
- A higher listed frequency option is available for timing-sensitive designs (对比 A3P060-1VQG100)
- Uses a compact, reprogrammable package for low-density embedded logic (对比 A3PN060-VQG100)
设计说明
The A3P060-VQ100 uses a 100-pin VQFP with a 0.50 mm lead pitch and a 14 x 14 mm body. Place all power and ground decoupling components directly beside their assigned package pins, keep the return path compact, and avoid routing high-speed or switching signals beneath the device unless the stackup has been evaluated. Follow the manufacturer land pattern and paste recommendations because small lead-pitch packages are sensitive to solder volume, placement tolerances, and reflow-profile variation.
Create a pin-assignment plan before routing the PCB. The device has 71 listed user I/Os, and each assigned signal can affect available voltage standards, bank relationships, clock routing, and timing closure. Reserve configuration, programming, control, and critical clock pins according to the ProASIC3 pin-description table, then run the design through the Microchip tool flow with the correct A3P060 device and speed designation. Do not infer a complete pinout from another ProASIC3 package.
Plan the 1.5 V core supply as a dedicated, low-impedance rail and follow the manufacturer guidance for bypass capacitance and permitted operating conditions. Estimated: core dissipation equals 1.5 V multiplied by the actual core current; add I/O and auxiliary current using the completed design's power report. Compare that total against the package thermal limits with board copper and the intended ambient temperature. These calculations must be replaced by final worst-case values after logic compilation.
A shared footprint does not eliminate the need to validate an ordering-code change. Before replacing A3P060-VQ100 with A3P060-VQG100, A3P060-1VQG100, or A3PN060-VQG100, compare the exact package drawing, pin names, supply requirements, speed grade, configuration method, programming file, and security settings. In particular, a distinct frequency suffix can alter timing assumptions, while the N-bearing family designation can identify a different device variant requiring its own configuration and timing checks.
合规信息
The ProASIC3 family is covered by manufacturer documentation, but an exact compliance declaration for the A3P060-VQ100 orderable code should be checked for the current production status and customer requirements.