A3P250-1FG256 - 3KLE ProASIC3 FPGA | Microchip
料号: A3P250-1FG256 ✓ 量产中A3P250-1FG256 概述
A field-programmable gate array, or FPGA, is a programmable digital semiconductor whose logic and interconnect resources are configured after manufacture. Within the broader programmable-logic hierarchy, an FPGA provides more flexible parallelism than a fixed-function logic circuit while offering faster development cycles than a custom application-specific integrated circuit. The A3P250 combines programmable logic, embedded memory, and user I/O in one package.
The ProASIC3 family is positioned for low-density designs requiring a small package and a broad selection of I/O resources. In the A3P250-1FG256, the 3KLE logic capacity is complemented by 36,864 bits of block RAM and 157 I/O. These resources suit designs that must consolidate control logic, communication interfaces, data acquisition front ends, or general-purpose glue logic without introducing the size and complexity of a larger programmable device.
Because the FPGA configuration is programmable, engineers can implement and revise multiple hardware functions in the same device family. The 256-LBGA package supports dense board layouts where 157 I/O are valuable, but its fine-pitch construction requires careful PCB design, component placement, and manufacturing control. Designers should assign pins and banks according to the package-specific pin table rather than inferring connectivity from another package variant.
Typical uses include industrial equipment controllers, data-acquisition modules, communications infrastructure, embedded test systems, and compact control platforms. The 157-I/O count is particularly useful for systems collecting parallel sensor data or coordinating multiple digital interfaces. The 36,864-bit block RAM can support packet buffering, sampled-data storage, lookup tables, and intermediate logic data where modest on-chip memory is sufficient.
The main design consideration is package-level implementation. Place the device on a multilayer PCB with a continuous ground plane, route high-speed or sensitive signals using controlled impedance, and follow the manufacturer’s decoupling and ball-assignment guidance. Verify the programmed bitstream against the exact A3P250-1FG256 device, package, and temperature variant before production programming.
This page combines device specifications, practical PCB guidance, application fit, and a qualified same-package replacement option. It also identifies the principal electrical, timing, power, and pin-level values that must be taken directly from the official Microchip documentation before schematic release or volume manufacturing.
直接替换替代料: A3P250-1FG256 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: A3P250-1FG256 (相同外形与封装尺寸) ——差异在于 Package.
A3P250-FG256I
✅ 直接替换📋 参考替代料(不在目录中)
A3P250-1FG256 最大额定值与电气特性
| Device Type | ProASIC3 field-programmable gate array |
| Logic Elements | 3KLE |
| Embedded Block RAM | 36,864 bits |
| User I/O | 157 |
| 封装 | 256-LBGA |
| Package Type | Low-profile ball grid array |
| 工作温度范围 | 0°C to +85°C |
| Programmable Logic | 3,000 logic elements |
| Device Family | ProASIC3 |
| 安装类型 | Surface mount |
A3P250-1FG256 low-profile ball grid array 引脚配置指南
A3P250-1FG256(low-profile ball grid array 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: A3P250-1FG256.
请参阅 数据手册 以查看完整引脚配置。
典型应用
A3P250-1FG256 适用于 6 应用s: Industrial Data-Acquisition Controller, Protocol Interface Consolidation, Programmable Logic Test Platform, Communication Equipment Line Card, Compact Embedded Control Platform, Security and Access Controller.
Industrial Data-Acquisition Controller
The A3P250-1FG256 fits compact data-acquisition controllers that must gather several sensor channels and perform control calculations without adding a separate processor and support logic. Its 157 user I/O provides substantial parallel connectivity for multiplexers, amplifiers, trigger signals, status indicators, and communications peripherals, while 3KLE provides programmable sequencing and control logic. The 36,864-bit block RAM can stage sampled words or small trace buffers. Place the device in a multilayer board with a continuous ground plane, keep sensitive analog sections separate from programmable-logic routing, and confirm every input threshold, bank voltage, and timing constraint in the official documentation.
Protocol Interface Consolidation
A3P250-1FG256 is appropriate for combining parallel, serial, and legacy control interfaces into a compact programmable-logic block. The 3KLE device can implement state machines, bus bridges, protocol converters, timeout counters, and interrupt logic, while its 157 I/O provide enough external connections for a multi-interface board. The 36,864-bit block RAM is useful for packet staging or temporary FIFO storage when the application does not require large frame buffers. Engineers should assign clock-capable pins and I/O pairs according to the exact FG256 package documentation, validate voltage-bank compatibility, and test protocol timing against the slowest required operating condition.
Programmable Logic Test Platform
The A3P250-1FG256 supports reusable test and measurement logic that routes instrument controls, captures parallel results, and sequences multiple front-end devices. With 3KLE, 157 I/O, and 36,864 bits of block RAM, it can combine trigger generation, timing-state control, pattern processing, and result transfer in one package. The dense 256-LBGA footprint helps reduce board area when a test card requires extensive connectivity. For reliable operation, use short return paths, properly terminated clock routes, local decoupling, and a solid ground reference. Validate the programmed configuration and test timing on the assembled board because package-specific routing and I/O assignments cannot be transferred safely from another A3P250 package.
Communication Equipment Line Card
A3P250-1FG256 can serve in line-card control and aggregation logic where programmable features shorten development cycles and permit field updates. Its 3KLE processing capacity is appropriate for framing, error checking, flow control, and status aggregation, while 36,864 bits of block RAM can buffer limited packet or status data. The 157 user I/O allow connection to line-card processors, backplanes, LEDs, reset control, and service interfaces. Designers should reserve documented clock-capable pins, group I/O by compatible voltage domain, and maintain continuous ground-plane continuity under the fine-pitch FBGA. Exact speed, power, and timing limits must be taken from the Microchip documentation for the selected suffix.
Compact Embedded Control Platform
The A3P250-1FG256 is useful in embedded controllers that require deterministic programmable logic but not the capacity of a larger FPGA. It can implement motor sequencing, interlocks, counter logic, fault latches, and supervisory functions using 3KLE, while the 157 I/O connect sensors, actuators, displays, and external memories. Its 36,864-bit block RAM supports compact lookup tables, waveform records, and intermediate data. The commercial 0°C to +85°C range suits controlled indoor equipment. Keep high-current switching paths away from sensitive logic, provide local bypass capacitance according to the reference circuit, and check absolute pin states during configuration and reset before production release.
Security and Access Controller
A3P250-1FG256 can implement tamper-aware access control, credential-format conversion, alarm logic, and event sequencing in programmable logic. Its 157 I/O are useful for keypad scanners, card-reader interfaces, lock controls, indicators, and supervisory contacts, while 3KLE supports multiple finite-state machines and protocol checks. The 36,864-bit block RAM can hold fixed lookup values or limited event records. Secure designs should isolate sensitive signals, provide a controlled reset and configuration path, and ensure that configuration storage and access-control policies meet the product’s security requirements. Validate I/O standards, bank voltages, timing margins, and startup behavior against the official package and device documentation.
工程参考数据: A3P250-1FG256 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | A3P250-FG256I |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 256-LBGA | 256-FPBGA |
| Device Family | ProASIC3 | ProASIC3 |
| Embedded Block RAM | 36,864 bits | 36 Kb |
| Operating Temperature Range | 0°C to +85°C | -40°C to +100°C junction |
| Programmable Logic | Field-programmable gate array | Field-programmable gate array |
关键差异点
- High I/O density in a single programmable device (对比 A3P250-FG256I)
- Commercial-temperature ordering option (对比 A3P250-FG256I)
- Embedded memory without external storage for modest buffering (对比 A3P250-FG256I)
设计说明
Use the official FG256 ball map to assign every power, ground, configuration, clock, and user I/O connection. The package provides 157 user I/O on a 256-ball footprint, so several balls support configuration, supply, or ground functions. Reserve those balls before placing external circuitry, maintain layer transitions for ground and supply connections, and follow the manufacturer’s via and decoupling recommendations to avoid splitting return currents.
Route clock-capable inputs and any documented differential pairs directly from their assigned balls to their destinations. Keep switching and high-current outputs away from sensitive input conditioning, and avoid routing clocks over split ground-plane regions. The A3P250 family’s small-package implementation depends on short, controlled routes for predictable timing and reduced susceptibility to board-level noise.
Do not reuse pin assignments, voltage-bank rules, timing constraints, or programming files from a different A3P250 package such as VQG100, PQG208, or FG144. Although several suffixes share the A3P250 family name, package balls and supported functions can differ. Lock the exact A3P250-1FG256 device, verify its constraints against the official documentation, and run post-place-and-route timing checks before releasing the bitstream.
Plan separate routing for each documented supply domain and place decoupling capacitors close to the corresponding device balls. The available material does not state the A3P250-1FG256 core voltage, I/O voltage range, or per-rail limits, so use the manufacturer’s pin-description and power-consumption tables rather than assuming a common supply. Verify startup sequencing and permitted voltage combinations when external processors control the board.
合规信息
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements appear in the manufacturer or distributor information for A3P250-1FG256.