A3P400-1FG256 - 55K-Gate ProASIC3 FPGA | Microchip
料号: A3P400-1FG256 ✓ 量产中A3P400-1FG256 概述
A field-programmable gate array is a digital semiconductor whose logic functions are configured through a programmable interconnect and configuration memory. In the broader device hierarchy, an FPGA is a programmable logic device within the broader semiconductor category. The ProASIC3 family combines configurable logic blocks with programmable interconnect and flash-based configuration, allowing a design to be changed without replacing the physical component.
The A3P400-1FG256 is identified by Microchip as a ProASIC3 FPGA with 5K logic elements and 178 I/O in a 256-LBGA package. The manufacturer describes the A3P400 family as an ultra-low-density FPGA offering single-chip operation, compact packaging, reprogrammability, advanced features, and a low total cost of ownership. Its 256-ball package supports dense board integration while preserving 178 available I/O for external interfaces.
The A3P400 device family includes variants identified as having 400,000 gates and 9,216 configurable logic blocks. A related A3P400-1FG256YI variant operates from 1.425 V to 1.575 V with a nominal core supply of 1.5 V. These figures establish the family's low-voltage, CMOS-oriented operating architecture, although individual production devices must be checked against their specific ordering information and datasheet limits.
Typical uses include industrial control, communications interface conditioning, data acquisition, embedded protocol management, and compact embedded systems that benefit from field-reprogrammable logic. The 178 I/O count is particularly useful when a design needs numerous digital connections while using a single programmable device instead of several fixed-function logic ICs. The small 256-LBGA footprint also supports space-constrained board layouts.
The principal design consideration is package and signal integrity. The 256-LBGA device requires a multilayer PCB, careful escape routing, short return paths, and adequate power and ground-plane distribution. Because the I/O count is high, designers should assign interfaces by supported voltage standard and bank before finalizing the pin plan. Use the manufacturer pin-description tables and recommended power-supply connections when assigning every ball.
This page combines the device identity, package information, low-density ProASIC3 positioning, application guidance, verified comparison points, and practical PCB considerations into a concise engineering reference for designers evaluating the A3P400-1FG256.
直接替换替代料: A3P400-1FG256 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: A3P400-1FG256 (相同外形与封装尺寸) ——差异在于 Configuration Memory, Logic Elements.
A3P400-FG256
✅ 直接替换联系询价
查看数据手册 →A3P400-1FG256I
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
A3P400-1FG256YI
✅ 直接替换📋 参考替代料(不在目录中)
A3P400-2FG256
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
A3P400-2FG256I
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
A3P400-1FG256 最大额定值与电气特性
| Device Type | ProASIC3 flash FPGA |
| Logic Elements | 5K logic elements |
| Gate Count | 55,296 gates |
| I/O Count | 178 I/O |
| 封装 | 256-LBGA |
| Programmable Density | Ultra-low-density FPGA |
| Configuration Memory | Flash-based |
| Core Supply Voltage | 1.5 V nominal |
| Core Supply Voltage Range | 1.425 V to 1.575 V |
| Configurable Logic Blocks | 9,216 CLBs |
| Device Architecture | Single-chip FPGA |
| Programmability | Field-programmable and reprogrammable |
| 安装类型 | Surface mount |
| Ball Count | 256 balls |
A3P400-1FG256 256-lbga 引脚配置指南
A3P400-1FG256(256-lbga 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: A3P400-1FG256.
请参阅 数据手册 以查看完整引脚配置。
典型应用
A3P400-1FG256 适用于 6 应用s: Industrial Control Logic, Communications Interface Bridging, Data Acquisition Front Ends, Embedded Protocol Management, Security and Access Control, Test and Measurement Equipment.
Industrial Control Logic
The A3P400-1FG256 fits compact industrial controllers that combine sequential control, status handling, and several peripheral interfaces. Its 5K logic elements provide programmable logic for state machines, interlocks, and data routing, while 178 I/O reduce the need for external fixed-function glue logic. A board designer can implement the control fabric and bus logic in one flash-programmable FPGA. The principal constraints are timing closure, I/O-bank voltage compatibility, and thermal performance, so confirm the exact speed and temperature suffix before production release.
推荐
Communications Interface Bridging
The A3P400-1FG256 can bridge parallel and serial interfaces when a product needs protocol conversion, byte alignment, buffering, or test-point insertion. Its 178 I/O provide substantial connectivity for data buses and control signals, and reprogrammability allows interface logic to be updated during product maintenance. Implement the bridge as clocked state machines and registered I/O paths, then constrain all clock and interface timing. Validate signal-integrity margins and supported voltage standards rather than assuming every I/O can operate at the core supply voltage.
推荐
Data Acquisition Front Ends
The A3P400-1FG256 is appropriate for acquisition front ends that perform parallel sampling control, channel sequencing, thresholding, and data formatting before transfer to a processor. The 178-I/O count supports multiple sensor inputs and digital control outputs, while 5K logic elements can host acquisition state machines and conditioning logic. Place acquisition paths in compatible I/O banks and register them to reduce timing uncertainty. Validate analog front-end settling separately and use the FPGA for digital control rather than attempting precision analog amplification on the device.
推荐
Embedded Protocol Management
The A3P400-1FG256 can serve as a compact protocol engine in appliances, instruments, and embedded equipment where several communication formats must coexist. Its reprogrammable logic supports packet framing, checksum generation, command parsing, and interrupt coordination without a dedicated protocol controller for every interface. Use dedicated clocking, bounded combinational logic, and registered I/O to keep timing predictable. Because flash configuration simplifies field updates, the design can support product revisions while retaining the same 256-LBGA board footprint.
推荐
Security and Access Control
The A3P400-1FG256 is suitable for access-control systems that require credential-input handling, keypad scanning, lock control, event logging, and communications coordination. The 178 I/O accommodate multiple digital sensors and outputs, while the 5K logic elements can implement protocol and control state machines in one device. Flash-based configuration permits controlled firmware changes in deployed equipment. Security-critical designs should add authentication and tamper-response mechanisms at the system level and confirm the exact device lifecycle, programming, and operational requirements with Microchip.
推荐
Test and Measurement Equipment
The A3P400-1FG256 can implement measurement sequencing, instrument control, pattern generation, and data capture coordination in compact test equipment. Its large I/O count allows it to connect multiple control lines and parallel data channels, while programmable logic simplifies adaptation between different tester configurations. Use synchronized clock domains and careful timing constraints for acquisition accuracy. The device does not replace precision analog measurement circuitry; it instead performs deterministic digital control around the analog front end, data conversion, and communications sections.
推荐
推荐产品汇总
工程参考数据: A3P400-1FG256 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | A3P400-FG256 | A3P400-1FG256I | A3P400-1FG256YI | A3P400-2FG256 |
|---|---|---|---|---|---|
| Package | 256-LBGA | 256-LBGA | 256-LBGA | 256-LBGA | 256-LBGA |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| FPGA Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 |
| Logic Elements | 5K logic elements | 5K logic elements | 5K logic elements | 5K logic elements | 5K logic elements |
| I/O Count | 178 I/O | 178 I/O | 178 I/O | 178 I/O | 178 I/O |
| Configuration Memory | Flash | Flash | Flash | Flash | Flash |
关键差异点
- Combines low-density programmable logic with extensive board connectivity (对比 A3P400-FG256)
- Supports field updates through flash configuration (对比 A3P400-2FG256)
- Matches the documented 1.5 V nominal core architecture of the YI ordering option (对比 A3P400-1FG256YI)
设计说明
The 256-LBGA footprint requires a multilayer PCB with uninterrupted power and ground planes. Follow the manufacturer package drawing for ball locations, pad geometry, solder-mask and paste design, and component placement orientation. Keep core, I/O, and configuration supplies decoupled with the capacitance and placement specified in the A3P400 design guidance. Dense escape routing should be planned before placing the BGA because 178 I/O can constrain layer transitions and signal-via allocation.
Assign interfaces to I/O banks using the voltage requirements published for the exact A3P400 ordering code. The related A3P400-1FG256YI has a 1.425 V to 1.575 V core range, but that value does not establish the permitted voltage range for every user I/O. Use registered I/O for high-fanout signals, provide a continuous return path beneath routed interfaces, and validate edge rates with the actual external-device loading and PCB stack-up.
Do not treat the -1, -2, I, and YI ordering suffixes as interchangeable without checking the ordering guide. A shared 256-LBGA footprint establishes mechanical interchangeability, not timing, temperature, or lifecycle equivalence. Rebuild and time the design for the replacement speed grade, review configuration pins and power sequencing, and confirm that every assigned I/O and peripheral remains supported. Field programming also requires a controlled configuration update and validation process.
合规信息
Compliance documents were not identified for the exact A3P400-1FG256 ordering code. Request the current manufacturer material declaration and qualification records before production release.