AD8016ARE - Low-Power ADSL Line Driver | Analog Devices
料号: AD8016ARE ✓ 量产中AD8016ARE 概述
An xDSL line driver is an interface amplifier that converts a low-amplitude transmit signal into a high-current, high-voltage output suitable for driving a copper DSL transformer. In the signal-chain hierarchy, the AD8016 belongs to the line-driver and operational-amplifier family, where its role is more specialized than that of a general-purpose op amp. High output current and low power dissipation are the principal engineering requirements because transformer loads present substantial impedance and can demand sustained drive at the line interface.
The AD8016 is identified as a second-generation DSL line driver and supports full-rate ADSL service from the central office. According to the Analog Devices product information, its ±12 V supply arrangement and novel circuit design provide the operating conditions needed for symmetrical line-side and central-office transmit paths. The flexible standby function allows a system designer to place the driver in a reduced-power state without changing the board layout or removing the device from the circuit.
The 28-lead TSSOP package offers a compact surface-mount footprint suitable for high-density line-card equipment. Because the AD8016 develops a high-current output into a transformer load, board construction is important: return paths must carry the required current with low inductance, and exposed-pad or ground-connection treatment should follow the package drawing in the manufacturer datasheet. Decoupling and output-network values should likewise be taken from the application guidance rather than copied from a generic amplifier layout.
Typical uses include ADSL central-office line cards, customer-premises ADSL equipment, xDSL line-interface modules, and paired line drivers for symmetric line circuits. The AD8016 can also support VDSL-oriented driver stages when the transformer, bandwidth, isolation, and thermal conditions meet the device specifications. Its low 1.5 W total power dissipation figure makes it especially relevant to multi-channel equipment where each driver contributes to the overall thermal budget.
When selecting this driver, verify the supply voltages, output-current limit, bandwidth, slew rate, output-voltage swing, and thermal performance against the actual transformer and line rate. Confirm the exposed-pad connection and copper area on a multilayer PCB, then validate distortion and loop performance with the intended magnetics. This page combines the manufacturer description, package information, distributor availability references, and practical design considerations to support component selection and PCB planning.
直接替换替代料: AD8016ARE ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
AD8016ARB
✅ 直接替换联系询价
查看数据手册 →AD8016AREZ
✅ 直接替换📋 参考替代料(不在目录中)
AD8016ARE-REEL
✅ 直接替换📋 参考替代料(不在目录中)
AD8016ARE 最大额定值与电气特性
| Product Type | xDSL line driver |
| Generation | 2nd generation |
| Application | Full-rate ADSL line driving |
| Total Power Dissipation | 1.5 W |
| Power Class | Low power |
| Output Characteristic | High output current |
| Supply Arrangement | ±12 V |
| Standby Function | Flexible standby |
| Drive Position | Optimized for both ends of the line |
| 封装 | 28-lead TSSOP |
| Available Family Packages | 20-lead PSOP, 24-lead SOIC, 28-lead TSSOP |
| 安装类型 | Surface mount |
| Product Category | Operational amplifier / DSL line driver |
| Manufacturer | Analog Devices |
AD8016ARE 20-lead psop, 24-lead soic, 28-lead tssop 引脚配置指南
AD8016ARE(20-lead psop, 24-lead soic, 28-lead tssop 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: AD8016ARE.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AD8016ARE 适用于 6 应用s: ADSL Central-Office Line Cards, ADSL Customer-Premises Equipment, Symmetric xDSL Transmit Interfaces, xDSL Line-Interface Modules, High-Speed DSL Amplifier Boards, Power-Controlled Telecom Line Cards.
ADSL Central-Office Line Cards
The AD8016ARE fits central-office ADSL transmit cards because Analog Devices identifies the AD8016 as a second-generation driver capable of delivering full-rate ADSL service from the central office. Its high-output-current architecture provides the drive level needed by a line transformer, while the specified 1.5 W total power dissipation supports multi-channel thermal budgets. Each channel should use the manufacturer's transformer and filtering guidance, with separate local decoupling and a low-inductance ground return. The flexible standby function can also reduce consumption when line activity subsides.
推荐
ADSL Customer-Premises Equipment
In customer-premises ADSL equipment, the AD8016ARE provides a dedicated high-current drive stage for the line-side transformer rather than relying on a general-purpose amplifier. The second-generation xDSL architecture and 1.5 W power specification balance throughput with system heat, which is important in enclosed CPE housings. Use the recommended termination and transformer network to control distortion, and place supply bypass capacitance close to the driver pins. Standby control can be coordinated with the modem's power-management sequence to avoid unnecessary dissipation.
推荐
Symmetric xDSL Transmit Interfaces
The AD8016ARE is suitable for a symmetric xDSL transmit interface where the design needs a high-current output stage and flexible standby control. Analog Devices describes the device as optimized for line driving at both ends of the connection, making it useful where the same line-driver architecture is applied across equipment categories. Transformer selection remains central to achieving the intended bandwidth and return loss. Validate peak output current, slew behavior, and harmonic distortion against the selected magnetics, and keep the high-current loop area small on the PCB.
推荐
xDSL Line-Interface Modules
The AD8016ARE can serve as the transmit amplifier in a dedicated xDSL line-interface module, where the priority is sustained current drive rather than only low-level signal amplification. Its 28-lead TSSOP package supports compact, high-density line cards, and the 1.5 W power specification provides a defined basis for thermal design. Follow the manufacturer's decoupling and output-network recommendations, and provide substantial copper beneath the exposed pad where the package drawing calls for it. System-level loop performance should be measured with the final transformer and filter.
推荐
High-Speed DSL Amplifier Boards
For compact amplifier boards carrying a DSL transmit channel, the AD8016ARE combines a dedicated xDSL driver with a surface-mount 28-lead TSSOP package. This makes it practical to build a line-driver channel around the manufacturer's recommended transformer and filter network without using a through-hole high-power stage. Because output current can be substantial, route output and return conductors together, provide adequate input and output bypassing, and test temperature rise at maximum channel activity. The flexible standby function helps reduce heat in lightly loaded or inactive channels.
推荐
Power-Controlled Telecom Line Cards
The AD8016ARE is useful in telecom line cards where standby behavior and channel dissipation must be managed over long operating periods. Its flexible standby function allows the transmitter to enter a reduced-power state when the link is idle, while the 1.5 W total power specification provides a defined thermal target for the active channel. Coordinate standby control with downstream protection circuitry so the output remains in a defined state. Confirm the logic levels and timing in the manufacturer datasheet before connecting it to a channel-management controller.
推荐
推荐产品汇总
工程参考数据: AD8016ARE ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AD8016ARB | AD8016AREZ | AD8016ARE-REEL |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 28-lead TSSOP | 28-lead TSSOP | 28-lead TSSOP per cross-reference listing | 28-lead TSSOP |
| Product Type | xDSL line driver | AD8016-family xDSL line driver | AD8016-family xDSL line driver | xDSL line driver |
| Target Application | Full-rate ADSL and xDSL line driving | AD8016-family DSL line driving | AD8016-family DSL line driving | Full-rate ADSL and xDSL line driving |
| Ordering Difference | Tube-packed AD8016ARE designation | Different ordering suffix | Different ordering suffix | Tape-and-reel packing suffix |
关键差异点
- Dedicated xDSL line-driver architecture (对比 AD8016ARB)
- Flexible power-management control (对比 AD8016ARE-REEL)
- Direct tube-packed ordering identity (对比 AD8016ARE-REEL)
设计说明
Analog Devices specifies 1.5 W total power dissipation for the AD8016 family. Estimated: at the stated 1.5 W condition, a 28-lead TSSOP assembled on a multilayer PCB will require thermal qualification of the exposed-pad copper path. Use the package drawing and datasheet thermal data to determine exposed-pad connection, then verify the hottest channel during sustained full-rate activity. Do not assume that a small copper area can dissipate the rated 1.5 W without a temperature-rise test.
Place the input, output, supply, and ground connections according to the Analog Devices application guidance. Keep high-current output and return traces short, wide, and closely coupled to minimize loop inductance and radiated emissions. Place bypass capacitors directly at the associated pins, preserve a continuous ground reference, and provide unobstructed copper beneath the exposed pad. These layout practices are especially important because the AD8016 is designed as a high-output-current line driver rather than a low-level precision amplifier.
Do not substitute the AD8016AREZ ordering option into an AD8016ARE layout without checking its package drawing; one cross-reference listing associates that suffix with a 28-pin SOIC rather than the 28-lead TSSOP package. Also verify standby logic levels, supply sequencing, and output state before enabling the driver. Obtain the exact ordering-code and package information from the manufacturer datasheet rather than relying only on a distributor search result.
合规信息
The AD8016 is an older xDSL line-driver product and no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements were found in the retrieved manufacturer and distributor snippets. AEC-Q100 is not applicable because this is a telecom line-driver IC rather than an automotive-qualified device. Check the current Analog Devices product documentation for lifecycle and environmental declarations before release to production.