AD9066JR - Dual 6-Bit 60 MSPS ADC | Analog Devices
料号： AD9066JR ✗ 停产AD9066JR 概述
An ADC is a data-conversion IC that samples an analog voltage and represents it as a digital code. Within the signal-chain hierarchy, the AD9066 is a dual flash ADC: a dual analog-to-digital converter, a data converter, a signal-processing IC, and ultimately a semiconductor. Its paired I and Q channels support coherent quadrature demodulation, while its relatively low resolution reduces output logic and digital-processing demands compared with higher-resolution converters.
Key features include two matched ADCs on one CMOS-compatible chip, 6-bit resolution, operation to 60 MSPS, a single +5 V analog supply, and CMOS-compatible outputs rated for 60 MSPS. The on-chip voltage reference biases the analog inputs to midscale, and the self-biased architecture supports AC-coupled inputs. The manufacturer identifies direct broadcast satellite receivers and QAM demodulators as primary applications. The AD9066JR commercial-grade version is specified for 0°C to +70°C operation.
The AD9066 uses flash conversion to acquire high-speed samples without requiring a separate reference and ADC core for each channel. Two matched converters on one die help maintain matching between the in-phase and quadrature paths, which is important when phase and amplitude relationships carry information. Digital outputs are CMOS-compatible, while the encode input uses a CMOS stage with a TTL-compatible 1.4 V threshold. These interfaces allow the converter to be paired with external digital demodulators, processors, or FPGAs.
Typical uses include direct broadcast satellite receivers, QAM demodulators, broadband quadrature phase-shift-keying receivers, communications receivers, and other sampled I/Q systems where 6-bit resolution is sufficient. The 60 MSPS sampling rate supports high-bandwidth signal acquisition, while the 28-pin SOIC package supports conventional surface-mount assembly and compact single-board construction.
Designers should verify analog input range, common-mode behavior, required input coupling, digital output timing, and output encoding against the manufacturer datasheet before layout. Because the converter operates at 60 MSPS, controlled clock routing, low-impedance analog returns, adequate bypass capacitance, and separation of analog and digital return currents are important. The commercial temperature range also makes the AD9066JR unsuitable for applications requiring the broader industrial range of the AD9066AR.
This page consolidates the verified manufacturer specifications, distributor pricing, package and temperature distinctions, substitution limits, and application guidance. It also distinguishes verified facts from unspecified electrical details, avoiding unsupported claims where complete pin-level or timing information was not present in the retrieved source material.
直接替换替代料： AD9066JR ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： AD9066JR （相同外形与封装尺寸） ——差异在于 Operating Temperature Range, Package, Resolution, Sampling Rate.
AD9066JR 最大额定值与电气特性
| Product Type | Dual 6-bit monolithic analog-to-digital converter |
| Number of ADC Channels | 2 channels |
| 分辨率 | 6 bits |
| 采样率 | 60 MSPS per converter |
| Architecture | Flash ADC |
| Analog Supply Voltage | +5 V |
| Digital Output Interface | CMOS-compatible |
| Digital Input Interface | CMOS encode input with TTL-compatible 1.4 V threshold |
| Power Dissipation | 400 mW |
| On-Chip Reference | Yes |
| Input Biasing | Self-biased for AC-coupled inputs |
| 工作温度范围 | 0°C to +70°C |
| 封装 | 28-pin SOIC |
| 安装类型 | Surface Mount |
| RoHS 状态 | unknown |
| REACH Status | unknown |
AD9066JR 28-pin soic 引脚配置指南
AD9066JR（28-pin soic 封装）的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据： AD9066JR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AD9066JR 适用于 6 应用s: Direct Broadcast Satellite Receiver, QAM Demodulator Front End, Broadband Quadrature Phase-Shift-Keying Receiver, Communications Receiver I/Q Sampler, Digital Broadcast Satellite Tuner, Low-Cost Quadrature Measurement Front End.
Direct Broadcast Satellite Receiver
The AD9066JR is well matched to direct broadcast satellite receivers because it provides two matched 6-bit conversion channels at 60 MSPS in a 28-pin SOIC package. The I and Q outputs provide the sampled baseband signals needed by a demodulator, while the single +5 V supply and 400 mW dissipation simplify receiver power planning. According to the manufacturer description, the converter is optimized specifically for low-cost I/Q demodulation and broadband QPSK-related applications. Designers should route the satellite IF channel through controlled analog stages, preserve common-mode range, and use short digital output paths to the downstream FPGA or demodulator.
QAM Demodulator Front End
For QAM demodulation, the AD9066JR's dual 6-bit, 60 MSPS architecture supplies paired I and Q samples while limiting digital output bandwidth compared with a higher-resolution converter. CMOS-compatible outputs can feed a digital demodulator when timing, voltage levels, and encoding are matched correctly. The AD9066JR's 400 mW power dissipation and single +5 V operation are useful in compact receiver hardware. The primary design constraint is signal integrity: clock jitter, analog return paths, and simultaneous switching from downstream logic must not degrade the sampled I/Q relationship.
Broadband Quadrature Phase-Shift-Keying Receiver
The AD9066JR fits broadband QPSK receiver front ends that require simultaneous sampling of quadrature signals at up to 60 MSPS. Two matched converters on one chip support consistent I/Q acquisition, while the 6-bit code width provides a practical path to lower-cost digital demodulation. The single +5 V supply reduces rail complexity compared with dual-supply converters. Because QPSK demodulation relies on accurate phase relationships, PCB layout should maintain matched analog trace lengths where practical, isolate the clock from sensitive inputs, and provide local bypass capacitance at the supply pins.
Communications Receiver I/Q Sampler
The AD9066JR can serve as the I/Q sampling element in communications receivers where 60 MSPS acquisition and 6-bit resolution are sufficient to preserve the required carrier information. Its matched dual ADC architecture consolidates two channels into one 28-pin SOIC package, helping reduce board area relative to separate converters. The converter's CMOS-compatible digital outputs support connection to FPGA or DSP logic when the encode format and timing requirements are satisfied. Designers should validate full-scale signal behavior, acquisition timing, and output settling before committing the receiver channel layout.
Digital Broadcast Satellite Tuner
In a digital broadcast satellite tuner, the AD9066JR converts the analog I and Q outputs of the tuner IF chain into digital samples for demodulation and decoding. Its 60 MSPS maximum conversion rate supports the high-bandwidth satellite signal paths described in the manufacturer material, while matched converters help preserve the quadrature relationship. The low 6-bit resolution is appropriate when downstream digital gain and filtering make quantization error acceptable. A practical implementation should provide clean supply bypassing and avoid routing digital return currents beneath the analog input and clock paths.
Low-Cost Quadrature Measurement Front End
The AD9066JR is suitable for compact I/Q measurement systems where dual-channel sampling, modest resolution, and a single +5 V rail are more important than high precision. At 60 MSPS, the dual flash ADC can acquire synchronized analog channels for downstream spectral or phase analysis. Its 28-pin SOIC package and 400 mW dissipation support conventional surface-mount construction, but the complete analog input range and acquisition timing must be confirmed in the manufacturer datasheet. Keep the sampling clock away from sensitive analog nodes and provide a low-impedance ground reference.
工程参考数据： AD9066JR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AD9066AR |
|---|---|---|
| Package | 28-pin SOIC | 28-pin SOIC |
| Brand | Analog Devices | Analog Devices |
| Product Type | Dual 6-bit monolithic ADC | Dual 6-bit monolithic ADC |
| Resolution | 6 bits | 6 bits |
| Sampling Rate | 60 MSPS | 60 MSPS |
| Number of Channels | 2 | 2 |
| Operating Temperature Range | 0°C to +70°C | -40°C to +85°C |
| Supply Voltage | Single +5 V | Single +5 V |
| Power Dissipation | 400 mW | 400 mW |
| Digital Output Interface | CMOS-compatible | CMOS-compatible |
关键差异点
- Commercial temperature grade （对比 AD9066AR)
- Matched dual-channel conversion （对比 AD9066AR)
- Single-supply I/Q acquisition （对比 AD9066AR)
设计说明
Treat the analog and digital sections of the AD9066JR board as separate return-current paths. Place local bypass capacitors at the +5 V supply pins, keep the sampling-clock traces away from analog inputs, and route digital outputs directly toward the receiving FPGA or demodulator. The supplied 60 MSPS operation is fast enough that trace length, clock jitter, and shared-impedance effects can influence sampling quality. Follow the complete manufacturer evaluation-board layout when reproducing the reference design.
Validate the analog input range, common-mode limits, allowable drive impedance, and acquisition timing from the full AD9066 datasheet before selecting input components. The verified data confirms self-biasing for AC-coupled inputs and an on-chip reference, but it does not supply the complete input-range table. Do not infer those limits from the 400 mW power figure or from a generic ADC of the same resolution. Use the manufacturer's recommended source impedance and decoupling arrangement.
Budget the AD9066JR around its stated 400 mW dissipation and single +5 V supply. Estimated: at 5 V and 400 mW, the supply current is approximately 80 mA using P divided by V, before accounting for any additional board-level overhead. Confirm the actual operating current and converter enable behavior against the full electrical table, and size the supply for the system load and startup transient rather than only the nominal converter power.
Do not substitute AD9066AR for AD9066JR without reviewing the complete timing, encoding, and electrical specifications. The verified distinction is temperature range: AD9066JR is rated for 0°C to +70°C, whereas AD9066AR is rated for -40°C to +85°C. The supplied excerpts do not establish unconditional equivalence for every electrical parameter. Likewise, a generic dual 6-bit 60 MSPS ADC is not automatically drop-in compatible because package pin assignments and digital output coding may differ.
合规信息
The supplied sources do not explicitly state environmental compliance. AEC-Q100 qualification is not established for the AD9066JR; the commercial 0°C to +70°C grade should not be treated as automotive qualification.