AD9840JST - 10-Bit CCD Signal Processor | Analog Devices
料号: AD9840JST ✓ 量产中AD9840JST 概述
A CCD signal processor is a specialized mixed-signal interface IC that conditions and converts charge generated by a CCD imaging array. It sits between the CCD output and the downstream digital system, providing functions such as correlated double sampling, gain and offset adjustment, analog-to-digital conversion, and serial digital output. In the broader electronics hierarchy, the AD9840 belongs to the CCD signal-processor class within analog and mixed-signal semiconductors, interface ICs, and sensor and detector interfaces.
The AD9840JST provides 10-bit signal processing, analog signal input, and digital serial output. It is supplied in a 48-terminal square LFQFP package with gull-wing terminals and surface-mount construction. The commercial-extended temperature classification supports use in industrial and commercial imaging equipment, while the digital serial interface reduces the number of parallel data paths required between the CCD processor and downstream logic.
The architecture is tailored to CCD imaging rather than general-purpose standalone ADC use. CCD outputs commonly require correlated double sampling to suppress reset noise and baseline variation before digitization. By integrating this conditioning function with a 10-bit converter and serial output, the AD9840JST can reduce the external analog and digital interface complexity of a camera or scanner signal chain.
Typical applications include line-scan cameras, industrial image sensors, scanners, profiling systems, and scientific or inspection equipment that use CCD arrays. In these systems, the processor conditions the CCD charge-transfer output and provides a compact digital stream for image acquisition, thresholding, measurement, or downstream digital signal processing. The serial output is also useful where conserving board area and reducing parallel routing are important.
The principal PCB-design consideration is the 48-lead LQFP footprint. Its relatively fine lead pitch requires careful land-pattern construction, solder-paste control, and inspection. Signal-path components and decoupling should be positioned to preserve the timing and noise behavior of the CCD interface, while unused inputs and supply pins must follow the manufacturer pin-description table exactly.
This product summary combines the verified package, resolution, interface, temperature-grade, lifecycle, and sourcing information with practical guidance for CCD signal-chain integration. It also documents the limitations of the available alternatives, including the absence of a confirmed cross-brand, pin-compatible substitute for this specialized device.
直接替换替代料: AD9840JST ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
AD9840AJSTZ
✅ 直接替换📋 参考替代料(不在目录中)
AD9840JST 最大额定值与电气特性
| Product Type | 10-bit CCD signal processor |
| Signal Resolution | 10 bit |
| Input Interface | Analog input |
| Output Interface | Digital serial output |
| Number of Terminals | 48 terminals |
| Package Code | LFQFP |
| Package Shape | Square |
| Terminal Form | Gull wing |
| 安装类型 | Surface mount |
| Temperature Grade | Commercial extended |
| 生命周期状态 | Active |
AD9840JST square 引脚配置指南
AD9840JST(square 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: AD9840JST.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AD9840JST 适用于 6 应用s: Line-Scan Imaging Systems, Industrial Image Sensors, Document and Flatbed Scanners, Scientific Profilometry, Machine-Vision Inspection Equipment, Optical Measurement Instruments.
Line-Scan Imaging Systems
The AD9840JST fits line-scan camera electronics because it combines 10-bit CCD signal processing, analog input, and digital serial output in one 48-terminal LQFP device. Position the processor at the CCD analog-output stage, then route its serial data to the camera's acquisition logic or a downstream FPGA. The serial interface can reduce parallel routing compared with a discrete converter architecture, while the dedicated CCD-processing function simplifies signal-chain integration. Confirm input bandwidth, clock rate, and output timing against the manufacturer datasheet for the selected line rate, and preserve short, controlled analog paths between the CCD and processor.
推荐
Industrial Image Sensors
The AD9840JST is suitable for industrial imaging modules that require a compact interface between a CCD array and digital processing electronics. Its 10-bit processing resolution provides a defined conversion path, while the digital serial output limits the number of high-speed parallel traces crossing the board. Place input and decoupling components close to the associated device pins, and keep the CCD clock and data routing away from sensitive analog sections. The commercial-extended temperature classification should be checked against the camera enclosure's worst-case ambient and internal temperature conditions before production release.
推荐
Document and Flatbed Scanners
In document and flatbed scanners, the AD9840JST can condition the output of a linear CCD array and serialize the digitized pixel data for acquisition logic. The 10-bit internal resolution is appropriate for imaging chains where pixel precision is balanced against data rate and system complexity. Use the manufacturer's recommended CCD sampling and clocking arrangements to avoid saturation or timing errors, and maintain a controlled ground and return path from the analog input section to the supply references. Verify the required pixel clock and serial-output rate for the scanner's optical speed before selecting passive and routing parameters.
推荐
Scientific Profilometry
The AD9840JST can serve as the CCD interface stage in scientific profilometers that measure reflected light and convert the resulting array data into digital measurements. Its dedicated CCD signal-processing architecture avoids treating the component as a conventional standalone ADC and helps implement the sampling behavior expected by the imaging array. Place the device where CCD clock, analog input, and digital output routing can remain physically organized, because long analog traces can degrade measurement stability. Establish the input range, offset calibration, and clock frequency from the manufacturer documentation, then characterize offset and noise at the intended optical power level.
推荐
Machine-Vision Inspection Equipment
The AD9840JST supports machine-vision systems that use CCD arrays for dimensional inspection, defect detection, or optical alignment. The 10-bit conversion path and digital serial output provide a compact bridge between the sensor and digital processing section, while the 48-terminal LQFP package supports dense board layouts. Designers should isolate the CCD analog path from switching converters and high-current digital returns, and follow the manufacturer pin table for supply, clock, control, and output connections. Validate signal integrity across the required pixel clock and temperature range rather than assuming compatibility from resolution alone.
推荐
Optical Measurement Instruments
The AD9840JST is applicable to optical measurement instruments that derive data from CCD detector arrays and require repeatable digital sampling. Its analog-input architecture supports direct integration into a CCD signal chain, and its digital serial output provides a compact interface to control and processing electronics. For best results, establish the CCD bias and signal levels using the manufacturer's electrical characteristics, keep the analog trace short, and provide local supply bypassing with stable references. The processor's commercial-extended grade must cover the instrument's internal temperature range, and calibration should be performed at the expected illumination and signal levels.
推荐
推荐产品汇总
工程参考数据: AD9840JST ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AD9840AJSTZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) |
| Product Type | CCD signal processor | CCD signal processor |
| Resolution | 10 bit | 10 bit |
| Input Interface | Analog input | Analog input |
| Output Interface | Digital serial output | Digital serial output |
| Terminal Count | 48 terminals | 48 terminals |
关键差异点
- Dedicated CCD processing function (对比 AD9840AJSTZ)
- Established commercial-extended ordering option (对比 AD9840AJSTZ)
- Compact 48-terminal sensor interface (对比 AD9840AJSTZ)
设计说明
Use the manufacturer land pattern for the 48-lead gull-wing LQFP and place input, clock, and decoupling connections before routing the digital serial outputs. Keep the CCD analog-input trace short and maintain a continuous ground reference beneath the analog section. Routing clock and serial signals away from the analog input reduces coupling, but the final topology must follow the pin-description and application diagrams in the manufacturer documentation.
Establish the CCD clock rate, analog input amplitude, and serial-output timing from the datasheet before laying out the board. At higher pixel rates, impedance-controlled clock and serial routes, short return paths, and solid reference planes are important for maintaining timing margin. Avoid long stubs and test points on sensitive timing nets because added capacitance can alter edge rates even when the nominal signal frequencies appear acceptable.
Do not substitute AD9840AJSTZ solely because it uses the same 48-LQFP footprint. Check temperature grade, qualification, supply voltage, clock limits, serial-output protocol, and all pin assignments before treating it as a drop-in replacement. Likewise, do not assign every terminal from a generic QFP drawing; use the manufacturer pin-description table and mark any unused or no-connect positions exactly as specified.
Place the required supply-decoupling components close to their associated pins and provide a low-impedance return to the device ground. Separate the CCD-sensitive analog section from switching-regulator and high-current digital paths where the board area allows. Validate supply ripple, startup behavior, and signal settling with an oscilloscope at the actual clock and pixel rate, since catalog descriptions do not establish the final noise performance.
合规信息
The product listings identify AD9840JST as active and commercial extended, but they do not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.