ADS7816PB - 12-Bit 200 kHz SAR ADC | Texas Instruments
料号: ADS7816PB ✓ 量产中ADS7816PB 概述
A sampling ADC is a data-converter category that converts continuous analog voltage into discrete numeric codes. The ADS7816 belongs to the SAR ADC family, where a successive-approximation register completes one conversion through a sequence of internal comparisons. Within the broader hierarchy, it is an analog-to-digital converter, data-converter IC, and semiconductor designed for embedded measurement and control systems.
The principal features are 12-bit resolution, a 200 kHz sampling rate, differential input capability, and a synchronous serial interface. Automatic power-down reduces consumption when conversions are not continuous. A configurable reference from 100 mV to 5 V lets the designer trade signal range against sensitivity: the manufacturer describes resolution ranging from 24 µV to 1.22 mV across that reference range. These characteristics are useful for sensor interfaces, industrial controls, and portable instruments.
The ADS7816 uses a differential input arrangement, which helps reject common-mode voltage and supports direct sensing of small voltage differences. Its synchronous serial interface transfers conversion results through clocked digital signals and allows the acquisition timing to be coordinated with a controller. Automatic power-down is particularly valuable in intermittent measurement systems where duty cycling can reduce energy use between conversion events.
Typical applications include battery-operated data loggers, industrial process monitoring, portable instrumentation, control-loop sensing, and low-power embedded measurement. For sensor outputs, the differential input can represent the difference across a bridge or other sensor network. For portable systems, automatic power-down supports duty-cycled acquisition. The 200 kHz rate provides enough throughput for multiple analog channels multiplexed under a controller when application timing permits.
When designing the circuit, follow the manufacturer’s recommended input and reference network, terminate the serial interface appropriately, and account for acquisition time before reading a new conversion. Differential input routing should minimize mismatch between signal and return paths. Reference stability directly influences accuracy, so reference bypassing and grounding deserve as much attention as the analog input itself.
This page combines the manufacturer’s core conversion specifications with practical application guidance, interface considerations, and a disciplined replacement checklist. It is designed to help engineers evaluate the ADS7816PB for compact, low-power data-acquisition designs without overlooking package, reference, or pin-level constraints.
直接替换替代料: ADS7816PB ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料ADS7816PB 最大额定值与电气特性
| 分辨率 | 12 bit |
| 采样率 | 200 kSPS |
| Architecture | Successive-approximation register (SAR) |
| Input Type | Differential, 1 input |
| Digital Interface | Synchronous serial interface |
| Reference Voltage Range | 100 mV to 5 V |
| Resolution at 100 mV Reference | 24 µV |
| Resolution at 5 V Reference | 1.22 mV |
| Power-Down Current | 3 µA maximum |
| Power-Down Function | Automatic power down |
| 封装 | 8-PDIP |
| Package Type | Through-hole mini-DIP |
| 安装类型 | Through-hole |
ADS7816PB through-hole mini-dip 引脚配置指南
ADS7816PB(through-hole mini-dip 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: ADS7816PB.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADS7816PB 适用于 6 应用s: Battery-Powered Data Logging, Industrial Process Monitoring, Portable Instrumentation, Bridge and Sensor Signal Acquisition, Embedded Control-Loop Sensing, Low-Power Environmental Monitoring.
Battery-Powered Data Logging
The ADS7816PB fits battery-powered data loggers because it combines a 200 kSPS sampling rate with automatic power-down and a maximum power-down current of 3 µA. A controller can wake the converter, acquire sensor readings at programmed intervals, store the 12-bit results through the synchronous serial interface, and return the device to a low-power state. This duty-cycled approach can reduce average energy use, although the complete power budget must also include the reference, microcontroller, pullups, and sensor. Differential input is valuable when the measured signal is small and a ground-referenced return can be arranged close to the source.
Industrial Process Monitoring
ADS7816PB is suitable for industrial process-monitoring modules that must acquire a small analog signal in a compact through-hole or legacy PCB layout. Its 200 kSPS SAR conversion rate provides sufficient throughput for many sensor channels when multiplexing and control-loop timing allow, while 12-bit resolution supports measurements across a 100 mV to 5 V reference range. The differential input helps reject common-mode voltage when the sensor output is referenced to a noisy industrial ground. Designers should keep the analog input and reference routing compact, use a stable reference, and isolate high-energy wiring from the sensitive conversion path.
Portable Instrumentation
The ADS7816PB supports portable test and measurement equipment where low standby consumption and accurate scaling of small input signals are important. At a 200 kSPS maximum sampling rate, the 12-bit SAR ADC can acquire measurement values quickly while automatic power-down limits consumption between test sequences. The differential input allows a sensor bridge or other two-terminal sensing network to be measured relative to its return line, reducing susceptibility to common-mode voltage. The selected reference sets the input range and resolution, so the front-end and reference design must be matched to the expected signal rather than treating the full converter range as usable analog span.
Bridge and Sensor Signal Acquisition
ADS7816PB is appropriate for low-level differential sensing when a strain, pressure, or resistive bridge produces a small voltage around its common-mode level. The one differential input accepts the difference between the two sensing nodes, while the programmable reference range from 100 mV to 5 V permits the conversion scale to match the available signal span. At 12-bit resolution, the manufacturer states a resolution of 24 µV with a 100 mV reference and 1.22 mV with a 5 V reference. Practical accuracy still depends on reference stability, excitation noise, input settling time, PCB symmetry, and the electrical characteristics of the sensor network.
Embedded Control-Loop Sensing
ADS7816PB can serve as the analog front end of an embedded controller monitoring a feedback variable or process condition. Its 200 kSPS conversion capability allows measurements to be refreshed more quickly than many slow industrial or portable control loops, while the synchronous serial interface provides predictable communication with a microcontroller or digital controller. Differential input improves common-mode rejection for measurements made in electrically noisy systems. The control designer should include acquisition and conversion latency in the loop timing, avoid treating the maximum sampling rate as guaranteed throughput for every interface implementation, and preserve the recommended analog and reference layout to avoid adding conversion error.
Low-Power Environmental Monitoring
ADS7816PB fits compact environmental and condition-monitoring nodes that periodically measure slow sensor outputs. Although the converter can sample at 200 kSPS, a low-rate sensor usually benefits more from duty-cycled operation and automatic power-down than from continuous maximum-rate conversion. The 12-bit result provides a practical balance between measurement resolution and power consumption, while the differential input can support bridge-based or referenced sensing arrangements. Design the system around a stable reference, adequate acquisition settling, and a controller that can control serial clocking. Account for sensor excitation, reference overhead, leakage, and sleep-mode timing when comparing battery life across complete designs.
工程参考数据: ADS7816PB ——对比、设计指导和合规信息。
选型指南
设计说明
Route the differential input as a compact, impedance-matched pair and keep the route away from digital clock and serial-data traces. Place the manufacturer-recommended input and reference components close to the corresponding pins, and provide a direct, low-impedance ground return. Differential routing helps reject common-mode noise, but it cannot compensate for mismatched source impedances or leakage interacting with unbalanced traces.
Do not confuse the 100 mV to 5 V reference range with the permitted supply-voltage range. Reference voltage sets the ADC input scale and the stated 24 µV to 1.22 mV resolution range. Verify startup sequencing, bypass placement, and conversion timing against the manufacturer application circuit before applying a 5 V reference or using the maximum 200 kSPS sampling rate.
Estimated: average supply current depends on the converter’s active duty cycle, supply voltage, reference implementation, and external circuitry. If the ADS7816 were operated continuously at 200 kSPS, the conversion-related energy would be proportional to active current, supply voltage, and 200,000 conversions per second; during inactivity, the datasheet specifies a maximum power-down current of 3 µA. Validate the complete battery budget rather than relying on shutdown current alone.
合规信息
No specific compliance declarations for the ADS7816PB package were identified in the cited product and distributor pages.