ADSP-BF707BBCZ-3 - 300MHz Blackfin+ DSP | Analog Devices
料号: ADSP-BF707BBCZ-3 ✓ 量产中ADSP-BF707BBCZ-3 概述
A Blackfin+ digital signal processor is a specialized semiconductor that belongs to the processor, embedded processor, and digital signal processor hierarchies. Unlike a general-purpose microprocessor, its architecture emphasizes deterministic multiply-accumulate operations, parallel data movement, and efficient processing of continuous real-world signals. The ADSP-BF707 family integrates the Blackfin+ core with on-chip SRAM and memory interfaces for compact embedded signal-processing designs.
The processor provides a 16-bit and 32-bit MAC engine, 1 MB of L2 SRAM, DDR2 and LPDDR memory-interface support, and a 1.1 V integrated core voltage. Its -40°C to +85°C ambient operating range supports industrial and commercial equipment. The 300 MHz grade is intended for applications that require real-time processing performance without the 400 MHz maximum associated with the ADSP-BF707BBCZ-4 variant.
The Blackfin+ core combines dual-MAC 16-bit and 32-bit operations with a 16-bit complex MAC instruction set. This architecture is suitable for filtering, modulation, demodulation, FFT-based processing, audio decoding, and control loops. On-chip L2 SRAM reduces pressure on external memory during data-intensive operations, while the external DDR2 or LPDDR interface expands available storage for larger buffers and program data.
Typical uses include industrial audio equipment, communications infrastructure, motor and motion control, instrumentation, medical signal acquisition, and embedded condition-monitoring systems. The combination of a 184-ball CSPBGA package, 1 MB of L2 SRAM, and low static power makes the processor appropriate for compact systems where memory capacity, deterministic signal processing, and board area are important constraints.
Designers should follow the BF70x Blackfin+ Processor Hardware Reference for ball assignments, power sequencing, memory topology, and initialization requirements. The 12 x 12 mm BGA footprint requires careful escape routing, and mixed-signal or high-speed interfaces should be separated from processor supply paths to reduce coupling and maintain signal integrity.
This page combines the exact orderable MPN, package and processor characteristics, drop-in replacement analysis, comparison parameters, and implementation guidance. It distinguishes the 300 MHz ADSP-BF707BBCZ-3 from the 400 MHz ADSP-BF707BBCZ-4 and identifies where a board-level substitution would change operating conditions rather than merely changing an ordering suffix.
直接替换替代料: ADSP-BF707BBCZ-3 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
ADSP-BF707BBCZ-4RL
✅ 直接替换📋 参考替代料(不在目录中)
ADSP-BF707BBCZ-3 规格参数
| Product Type | Single-core Blackfin+ digital signal processor |
| Processor Core | Blackfin+ |
| 最大时钟频率 | 300 MHz |
| MAC Architecture | Dual 16-bit and 32-bit MAC plus 16-bit complex MAC |
| L2 SRAM | 1 MB |
| Integrated Core Voltage | 1.1 V |
| External Memory Interface | DDR2 and LPDDR |
| 封装 | 184-ball CSPBGA, 12 x 12 mm |
| 引脚数量 | 184 balls |
| 安装类型 | Surface mount |
| Operating Ambient Temperature | -40°C to +85°C |
| Static Power Consumption | Less than 100 mW |
| Processor Family | ADSP-BF70x Blackfin+ processor family |
| Core Count | 1 core |
| Data Width | 16-bit and 32-bit |
| MSL 等级 | 3 (168 hours) |
| RoHS 状态 | Compliant |
| REACH Status | REACH unaffected |
| Estimated Production Lead Time | 51 weeks |
| HTSUS Code | 8542.31.0001 |
ADSP-BF707BBCZ-3 184-ball cspbga, 12 x 12 mm 引脚配置指南
ADSP-BF707BBCZ-3(184-ball cspbga, 12 x 12 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: ADSP-BF707BBCZ-3.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADSP-BF707BBCZ-3 适用于 6 应用s: Industrial Audio Signal Processing, Communications Baseband Processing, Precision Instrumentation, Motion and Motor Control, Medical Signal Acquisition, Condition Monitoring and IoT Edge Processing.
Industrial Audio Signal Processing
The ADSP-BF707BBCZ-3 fits industrial audio equipment that requires real-time filtering or mixing in a compact embedded system. Its 300 MHz Blackfin+ core executes dual 16-bit and 32-bit MAC operations, while 1 MB of L2 SRAM provides on-chip working memory for sample buffers and intermediate filter states. The 184-ball CSPBGA limits board area but requires controlled escape routing from the 12 x 12 mm package. DDR2 or LPDDR support can accommodate larger program images and multi-channel sample storage.
推荐
Communications Baseband Processing
The ADSP-BF707BBCZ-3 is suitable for communications baseband tasks requiring deterministic multiply-accumulate throughput. Its dual 16-bit and 32-bit MAC capabilities support filtering and other real-time signal-processing operations, and the 16-bit complex MAC path is relevant to complex-valued modem workloads. The 1 MB of L2 SRAM reduces external-memory traffic for active working sets, while DDR2 or LPDDR interfaces support larger code and packet buffers. Designers should optimize memory placement against the BF70x hardware reference.
推荐
Precision Instrumentation
The ADSP-BF707BBCZ-3 can serve as the real-time processing core in compact instrumentation that performs filtering, calibration, or measurement analysis. A 300 MHz Blackfin+ core provides dedicated MAC throughput without relying only on a general-purpose control path, and the integrated 1 MB of L2 SRAM supports time-critical intermediate data. The -40°C to +85°C ambient operating range suits industrial instrumentation, while external DDR2 or LPDDR allows product variants to scale memory capacity without changing the processor architecture.
推荐
Motion and Motor Control
The ADSP-BF707BBCZ-3 fits embedded motion-control systems where a signal-processing core must execute control and filtering functions alongside higher-level logic. Its dual-MAC architecture supports efficient multiply-accumulate loops, and 1 MB of L2 SRAM can hold control tables, status data, and real-time working sets. The processor's -40°C to +85°C range covers industrial ambient conditions. Timing closure must account for the 300 MHz clock, external-memory latency, and deterministic task scheduling described in the processor documentation.
推荐
Medical Signal Acquisition
The ADSP-BF707BBCZ-3 can support compact medical or diagnostic signal-acquisition systems that require deterministic digital filtering and waveform processing. Its 300 MHz Blackfin+ core performs 16-bit and 32-bit MAC operations suited to sample-rate filtering and numerical analysis, while the 1 MB of L2 SRAM accommodates active acquisition buffers. The -40°C to +85°C industrial temperature range supports controlled equipment environments. Final medical use still requires application-specific validation, safety analysis, and compliance assessment outside the processor's component ratings.
推荐
Condition Monitoring and IoT Edge Processing
The ADSP-BF707BBCZ-3 fits edge condition-monitoring systems that analyze vibration, acoustic, or other sensor streams before sending results to a network. Dedicated MAC operations accelerate filtering and feature extraction, and the 1 MB of L2 SRAM reduces repeated transfers from external memory. The processor is listed with static power consumption below 100 mW, supporting designs that balance continuous processing capability with energy requirements. DDR2 or LPDDR can be added for larger history buffers, subject to the complete power and memory design.
推荐
推荐产品汇总
工程参考数据: ADSP-BF707BBCZ-3 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADSP-BF707BBCZ-4RL |
|---|---|---|
| Package | 184-ball CSPBGA (12 x 12 mm) | 184-ball CSPBGA (12 x 12 mm) |
| Brand | Analog Devices | Analog Devices |
| Processor Core | Blackfin+ | Blackfin+ |
| Maximum Clock Frequency | 300 MHz | 400 MHz |
| L2 SRAM | 1 MB | 1 MB |
| Data Width | 16-bit and 32-bit | 16-bit and 32-bit |
| Integrated Core Voltage | 1.1 V | 1.1 V |
| External Memory Interface | DDR2 and LPDDR | DDR2 and LPDDR |
关键差异点
- Lower-frequency grade within the same ADSP-BF707 architecture (对比 ADSP-BF707BBCZ-4RL)
- Dedicated real-time MAC signal-processing engine (对比 ADSP-BF707BBCZ-4RL)
- Integrated 1 MB L2 SRAM (对比 ADSP-BF707BBCZ-4RL)
设计说明
Treat the ADSP-BF707BBCZ-3 as a dense 184-ball CSPBGA and follow the manufacturer land pattern exactly. Route escape signals through the shortest practical paths, place decoupling capacitors near the associated supply balls, and preserve the recommended via structure beneath the package where required by the footprint. Because the processor operates at 300 MHz and can access DDR2 or LPDDR memory, verify escape-routing geometry and return paths with signal-integrity simulation before fabrication.
Use the BF70x Blackfin+ Processor Hardware Reference to implement the complete power architecture, including the 1.1 V integrated core rail, I/O supplies, external-memory rails, sequencing, and startup behavior. Place each supply's decoupling network at the correct package balls and keep switching-regulator and DDR memory power paths separate from sensitive processor and clock distribution. Validate both steady-state and transient operation because the processor's active power can differ substantially from its listed static consumption of less than 100 mW.
Keep clock, memory, and high-speed peripheral routes short and reference a continuous ground plane. Match memory-interface topology to the manufacturer hardware reference, including point-to-point and fly-by arrangements where specified. Separate DDR2 or LPDDR byte lanes from sensitive analog inputs, and avoid routing communications or debug signals through areas shared with switching power stages. Post-layout extraction should be used to check return-path continuity under simultaneous processor and memory activity.
Do not substitute ADSP-BF707BBCZ-4RL solely because it uses the same 184-ball CSPBGA footprint. Its documented maximum clock is 400 MHz compared with 300 MHz for ADSP-BF707BBCZ-3, requiring validation of clock tolerance, memory timing, power behavior, thermal performance, and software timing assumptions. The ADSP-BF707BBCZ-4 without the RL suffix has the same clock-rate difference. Confirm the complete ordering code, packaging request, and timing grade before procurement.
合规信息
RoHS-compliant status is listed for ADSP-BF707BBCZ-3. REACH is listed as unaffected. AEC-Q100 qualification, lead-free construction, halogen-free construction, and conflict-minerals status are not established for this orderable device.