ADSP-BF707KBCZ-3 - 300MHz Blackfin+ DSP | Analog Devices
料号: ADSP-BF707KBCZ-3 ✓ 量产中ADSP-BF707KBCZ-3 概述
A digital signal processor is a specialized microprocessor architecture optimized for filtering, transforms, control, and other repeated numerical operations. The Blackfin+ core combines a RISC-style instruction set with hardware multiplier-accumulator blocks, allowing substantial arithmetic throughput at a 300 MHz clock. Within the product hierarchy, it is a DSP, then a real-time embedded processor, then a semiconductor, with broader membership in the ADSP-BF70x Blackfin processor family.
The processor's headline characteristics include a 300 MHz operating frequency, dual 16-bit MAC support, 32-bit MAC support, and 16-bit complex MAC support. The 1024 KB L2/SRAM allocation provides on-chip memory for working data and code, while the 184-ball CSPBGA package supports dense integration in industrial, communications, audio, control, and embedded signal-processing equipment. The commercial-grade ordering code also supports cost-sensitive applications that do not require an automotive qualification.
The Blackfin+ engine is designed for deterministic real-time signal processing. Dual-MAC capability allows parallel multiply-accumulate operations, while mixed 16-bit and 32-bit arithmetic supports both compact fixed-point processing and wider arithmetic where needed. The 1024 KB memory pool can reduce external-memory traffic for data-intensive routines, but firmware, linker placement, cache policy, and external memory behavior remain critical to achieving predictable execution time.
Typical uses include industrial motor and motion control, audio decoding and enhancement, communications filtering, sensor processing, instrumentation, and embedded control. The ADSP-BF707 evaluation platform provides a practical route for evaluating boot behavior, peripherals, application software, and real-time signal-processing algorithms before integrating the processor into a production circuit board.
Designers should preserve the power, ground, clock, reset, and boot configuration according to the manufacturer reference design. The 12 x 12 mm BGA requires careful escape routing, adequate via density, and assembly-process planning. External memory interfaces, peripheral expansion, and high-speed signals must be evaluated against the electrical, timing, and layout guidance in the manufacturer documentation.
This page combines manufacturer architecture information, package and memory details, comparison-oriented engineering guidance, and practical design notes. It is intended to help engineers identify whether the 300 MHz ADSP-BF707KBCZ-3 fits a real-time DSP design, locate the correct documentation, and assess family alternatives before beginning PCB and firmware development.
直接替换替代料: ADSP-BF707KBCZ-3 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ADSP-BF707KBCZ-3 (相同外形与封装尺寸) ——差异在于 Maximum Clock Frequency, Product Type.
ADSP-BF707KBCZ-2
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
ADSP-BF707KBCZ-1
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
ADSP-BF706KBCZ-2
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
ADSP-BF706KBCZ-4
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
ADSP-BF707KBCZ-4
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →ADSP-BF707KBCZ-3 规格参数
| Product Type | Single-core Blackfin+ digital signal processor |
| 最大时钟频率 | 300 MHz |
| Processor Architecture | Blackfin+ DSP |
| Core Count | 1 core |
| Supported Arithmetic Widths | 16-bit and 32-bit |
| Multiplier-Accumulator Support | Dual-MAC 16-bit, 32-bit MAC, and 16-bit complex MAC |
| L2 Cache or SRAM | 1024 KB |
| Package Type | 184-CSPBGA |
| Package Dimensions | 12 x 12 mm |
| Terminal Count | 184 terminals |
| Package Code | LFBGA |
| 安装类型 | Surface mount |
| Temperature Grade | Commercial |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_qualified |
ADSP-BF707KBCZ-3 lfbga 引脚配置指南
ADSP-BF707KBCZ-3(lfbga 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: ADSP-BF707KBCZ-3.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADSP-BF707KBCZ-3 适用于 6 应用s: Industrial Motor and Motion Control, Audio Processing and Enhancement, Communications and Filter Processing, Sensor Signal Conditioning, Test and Measurement Instrumentation, Embedded Control and Firmware Platform.
Industrial Motor and Motion Control
The ADSP-BF707KBCZ-3 fits real-time motor-control systems that combine sampling, filtering, and control calculations in one embedded processor. Its 300 MHz Blackfin+ core and dual-MAC 16-bit arithmetic provide computational capacity for fixed-point control loops, while 1024 KB of L2 cache or SRAM can support working data and tightly bounded routines. The processor is placed between sensors or power stages and the control algorithms, with DMA and interrupts moving samples without excessive CPU involvement. Compared with a general-purpose MCU, the DSP-oriented MAC architecture provides greater arithmetic throughput for filters and transforms. The principal design trade-off is that the 12 x 12 mm, 184-CSPBGA package requires fine-pitch assembly and careful multilayer routing, so a production design should closely follow the evaluation-board power, clock, and memory layout.
推荐
Audio Processing and Enhancement
The ADSP-BF707KBCZ-3 can implement audio filtering, mixing, equalization, noise processing, and codec-interface handling in a compact embedded system. Its 300 MHz execution rate and dual-MAC 16-bit engine are aligned with the repeated multiply-accumulate operations found in FIR filters, IIR filters, and sample-rate conversion. The 1024 KB L2/SRAM block allows sample buffers and active coefficients to remain close to the computation engine, reducing pressure on external memory. A practical design would connect the codec or digital audio interface through the available peripherals and use DMA for continuous frame movement. The DSP is appropriate when predictable real-time processing matters more than the simplicity of a low-cost MCU. Power, memory timing, and external-interface configuration must follow the ADSP-BF707 reference design because the exact peripheral assignments and operating limits are defined by the manufacturer documentation.
推荐
Communications and Filter Processing
The ADSP-BF707KBCZ-3 is suited to communications front ends that perform digital filtering, modulation-related computation, spectrum processing, and data conditioning. Its 300 MHz Blackfin+ core supports mixed 16-bit and 32-bit arithmetic, allowing designers to use narrower fixed-point operations where dynamic range permits and wider operations for accumulation or intermediate results. The dual-MAC structure supports parallel signal-processing workloads, while 1024 KB of L2 cache or SRAM can hold active states and sample data. The processor can sit beside a network or control interface and use DMA to exchange blocks without tying the core to every transfer. Production implementation should verify serial-interface timing, DMA latency, external-memory behavior, and clocking against the ADSP-BF707 hardware reference. Its main advantage over a simple microcontroller is arithmetic throughput; its main design burden is careful memory and signal-integrity implementation.
推荐
Sensor Signal Conditioning
The ADSP-BF707KBCZ-3 can act as the central real-time processor in a multi-sensor acquisition system that requires filtering, calibration, feature extraction, and control decisions. The 300 MHz core provides enough instruction throughput for cascaded digital filters and related numerical operations, while the 1024 KB L2/SRAM region can accommodate active sample windows and working coefficients. Sensors can feed the processor through its available input interfaces or DMA channels, allowing acquisition and computation to overlap. This arrangement is useful when analog-front-end complexity would otherwise require several fixed-function blocks. Firmware must define deterministic buffers, bounded interrupt latency, and a memory map that avoids uncontrolled external-memory contention. The processor is not a direct substitute for a low-power MCU in battery-only sensors because its 300 MHz processing capability can increase system power, but it is valuable when conditioning, feature extraction, and control are combined in one embedded design.
推荐
Test and Measurement Instrumentation
The ADSP-BF707KBCZ-3 is appropriate for embedded instrumentation that performs real-time sampling, digital filtering, calibration, and numerical analysis. Its 300 MHz Blackfin+ core supports the multiply-accumulate operations required by filters, transforms, and compensation algorithms, while 1024 KB of L2 cache or SRAM provides storage for working buffers and code. In a measurement instrument, the processor can collect samples through DMA, process each frame deterministically, and pass results to a display, communications interface, or control output. The dedicated DSP architecture offers more numerical throughput than a basic microcontroller without requiring a separate accelerator. However, instrumentation accuracy depends on analog reference design, clock quality, memory timing, and calibration firmware rather than processor frequency alone. Designers should preserve the evaluation-board layer stack, power partitioning, and high-speed routing as the basis for a compact production instrument.
推荐
Embedded Control and Firmware Platform
The ADSP-BF707KBCZ-3 can serve as the core of an embedded control platform when real-time numerical processing and low-level peripheral control are both required. The Blackfin+ instruction set and hardware MAC blocks support deterministic routines, and 1024 KB of L2 cache or SRAM can host a substantial portion of the application and working data. A practical architecture separates acquisition, processing, and communication tasks through DMA and controlled interrupt priorities, helping prevent high-rate data traffic from delaying supervisory control functions. The processor's Blackfin software environment supports application development without changing the underlying real-time architecture when moving between compatible ADSP-BF70x options. Selection should account for thermal dissipation, external-memory timing, and assembly complexity introduced by the 184-CSPBGA package. For prototypes, the EVAL-BF707-EZLITE platform provides a practical way to validate boot, drivers, algorithms, and peripheral behavior before committing to a custom board.
推荐
推荐产品汇总
工程参考数据: ADSP-BF707KBCZ-3 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADSP-BF707KBCZ-2 | ADSP-BF707KBCZ-1 | ADSP-BF706KBCZ-2 | ADSP-BF706KBCZ-4 | ADSP-BF707KBCZ-4 |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 184-CSPBGA (12 x 12 mm) | 184-CSPBGA (12 x 12 mm) | 184-CSPBGA (12 x 12 mm) | 184-CSPBGA (12 x 12 mm) | 184-CSPBGA (12 x 12 mm) | 184-CSPBGA (12 x 12 mm) |
| Processor Family | ADSP-BF707 Blackfin+ | ADSP-BF707 Blackfin+ | ADSP-BF707 Blackfin+ | ADSP-BF706 Blackfin+ | ADSP-BF706 Blackfin+ | ADSP-BF707 Blackfin+ |
| Clock Frequency | 300 MHz | 200 MHz | 100 MHz | 200 MHz | 400 MHz | 400 MHz |
| Clock Difference From Target | 300 MHz | -33% | -67% | -33% | +33% | +33% |
| Terminal Count | 184 terminals | 184 terminals | 184 terminals | 184 terminals | 184 terminals | 184 terminals |
关键差异点
- Provides 100 MHz more clock frequency than the lower-speed ADSP-BF707 option (对比 ADSP-BF707KBCZ-2)
- Uses 1024 KB of on-chip L2 cache or SRAM (对比 ADSP-BF706KBCZ-2)
- Occupies a balanced performance position within the ADSP-BF70x family (对比 ADSP-BF707KBCZ-1)
- Avoids the 33% higher clock and associated power and timing envelope (对比 ADSP-BF706KBCZ-4)
设计说明
Use the EVAL-BF707-EZLITE schematic and layout as the baseline for the production 184-CSPBGA board. Preserve the recommended layer stack, via dimensions, ball-escape geometry, and high-speed topology because the 12 x 12 mm package has 184 terminals and limited routing escape area. Validate the design with assembly-rule checks and signal-integrity simulation before releasing the PCB.
Partition the supply rails so the processor, external memory, clock circuitry, and peripherals receive appropriately filtered and decoupled power. Follow the manufacturer reference design for voltage values, sequencing, and capacitor placement because those details are not defined by the 300 MHz clock rating alone. Check worst-case regulator dissipation using actual rail voltage, load current, efficiency, and ambient temperature.
Route clocks, memory interfaces, and other high-speed nets with continuous reference planes, controlled impedance, and avoidance of unnecessary stubs. Check source-synchronous timing and external-memory access margins under the intended clock, voltage, temperature, and board-loading conditions. Add test points or instrumentation headers where they do not compromise return paths or the BGA escape region.
Do not assume that processors with the same BGA package are automatically interchangeable. For every alternative, verify the ball map, power pins, boot mode, clock requirements, memory configuration, peripheral mapping, software restrictions, and operating-temperature grade. Treat speed-grade changes as timing and power-budget changes even when the PCB footprint remains unchanged.
合规信息
The part is identified as commercial grade in technical listings. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation.