ADV7174WBCPZ - PAL/NTSC Video Encoder | Analog Devices
料号: ADV7174WBCPZ ✓ 量产中ADV7174WBCPZ 概述
A digital video encoder is a semiconductor interface that transforms digital component-video frames into legacy analog composite or component output. It belongs to the video-processing IC hierarchy alongside decoders, converters, and interface ICs. The ADV7174 combines input timing, noise filtering, color modulation, and video DAC output in one integrated circuit, allowing portable video equipment to produce a television-compatible analog signal from a digital video pipeline.
The device supports ITU-R BT.601 and BT.656 YCrCb input and includes SSAF filtering, advanced power-management functions, copy-generation management through CGMS, and wide-screen signaling through WSS. Its 10-bit video DACs support high-quality analog generation, while the 80 dB video SNR provides a measurable signal-quality figure. NTSC M, PAL N2, PAL B/D/G/H/I, PAL M3, and PAL 60 output standards are listed in the manufacturer datasheet.
The SSAF filtering architecture reduces unwanted video artifacts associated with digital-to-analog conversion. Direct digital timing architecture, 32-bit internal processing, and the integrated DACs simplify synchronization between a digital video source and an analog television output. The 27 MHz clock requirement provides a common reference for the encoder and its 2x oversampling process, reducing the number of independent clock sources required in the surrounding system.
Typical applications include portable digital video products, camera systems, mobile-phone video accessories, video-conversion equipment, and compact consumer electronics that must generate PAL or NTSC baseband video. The integrated format support is especially useful when a product must address multiple television standards without relying on a large collection of external modulation and DAC components.
Designers should budget adequate routing space for the analog output, maintain the required power and ground distribution, and validate timing against the source pixel clock. The use of a 6 mm by 6 mm exposed-pad package also requires careful PCB thermal design so heat can transfer away from the device without disturbing sensitive video traces.
This page combines the manufacturer’s encoder specifications, package information, application guidance, comparison points, and practical design considerations. It helps engineers evaluate the ADV7174WBCPZ against the closely related ADV7179WBCPZ while preserving the distinction between confirmed device functions and parameters that still require project-specific validation.
直接替换替代料: ADV7174WBCPZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ADV7174WBCPZ (相同外形与封装尺寸) ——差异在于 Package, Video DAC Resolution, Wide-Screen Signaling.
ADV7179WBCPZ
✅ 直接替换联系询价
查看数据手册 →ADV7174WBCPZ 规格参数
| Product Type | Integrated PAL/NTSC digital video encoder |
| Digital Video Input | CCIR-601 4:2:2, 8-bit component data |
| Supported Input Standards | ITU-R BT.601 and BT.656 YCrCb |
| Video DAC Resolution | 10 bit |
| Video Signal-to-Noise Ratio | 80 dB |
| Required Clock Frequency | 27 MHz |
| Clocking Mode | 2x oversampling |
| Internal Digital Processing | 32-bit |
| NTSC Support | NTSC M |
| PAL Support | PAL N2, B/D/G/H/I, M3, and 60 |
| Analog Filter | SSAF super sub-alias filter |
| Copy Protection Support | Macrovision 7.1 on ADV7174 |
| Copy Generation Management | CGMS |
| Wide-Screen Signaling | WSS |
| Power Management | Advanced power-management features |
| 封装 | 40-lead LFCSP-WQ, 6 mm x 6 mm |
| 引脚数量 | 40 pins |
| 安装类型 | Surface mount |
ADV7174WBCPZ 40-lead lfcsp-wq, 6 mm x 6 mm 引脚配置指南
ADV7174WBCPZ(40-lead lfcsp-wq, 6 mm x 6 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: ADV7174WBCPZ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADV7174WBCPZ 适用于 6 应用s: Portable Digital Video Products, Digital Camera Video Output, Video Conversion and Adapters, Mobile Video Accessories, Professional Video Monitoring, Video Test and Measurement Equipment.
Portable Digital Video Products
The ADV7174WBCPZ fits portable equipment that accepts digital component video but must produce a television-compatible PAL or NTSC output. Its integrated 10-bit video DACs, SSAF filter, and 32-bit internal processing reduce the number of external conversion stages. The single 27 MHz clock with 2x oversampling also simplifies synchronization. In a battery-powered product, advanced power-management features help match operating behavior to the portable system, while the 6 mm by 6 mm LFCSP-WQ package limits board area.
推荐
Digital Camera Video Output
The ADV7174WBCPZ is appropriate for a camera design whose image processor produces CCIR-601 4:2:2 8-bit video and whose display or recording path requires analog baseband output. It accepts ITU-R BT.601 and BT.656 YCrCb data and supports NTSC M plus several PAL formats. The integrated DAC and SSAF filtering help contain analog-output complexity. Designers should preserve source-video timing, provide a clean 27 MHz reference, and validate the completed output against the intended television standard.
推荐
Video Conversion and Adapters
The ADV7174WBCPZ can serve as the analog-output stage in a digital-to-analog video adapter. Its support for both NTSC and multiple PAL standards makes it useful for equipment intended for different television regions. CCIR-601 4:2:2 8-bit input and BT.656 support provide familiar interfaces to digital video processors, while 10-bit DACs, an 80 dB video SNR figure, and SSAF filtering support the analog side. A production adapter should still validate synchronization, output levels, and regional television requirements.
推荐
Mobile Video Accessories
A mobile video accessory can use the ADV7174WBCPZ when it receives digital video from a host processor and needs a legacy television connection. The integrated encoder avoids a separate analog video DAC chain, and the supported NTSC and PAL standards allow regional configuration. The 40-lead 6 mm by 6 mm package suits compact boards, although exposed-pad layout, copper thermal capacity, and connector clearance remain important. Use the 27 MHz reference to minimize clock-related timing variation in the complete accessory.
推荐
Professional Video Monitoring
The ADV7174WBCPZ can provide an analog monitoring output from a professional digital-video processing system. Its 80 dB video SNR, 10-bit DAC architecture, and SSAF filter are relevant when the system must retain image detail while generating PAL or NTSC video. CGMS and WSS support add useful metadata functions for compatible workflows. The designer should use controlled-impedance routing for digital inputs, provide stable power distribution, and confirm monitor compatibility for the selected regional television standard.
推荐
Video Test and Measurement Equipment
The ADV7174WBCPZ is suitable for video-generation equipment that must exercise PAL and NTSC display paths from a digital source. Its support for CCIR-601 4:2:2 8-bit input, BT.601 and BT.656 timing, WSS, and CGMS permits controlled generation of standard video signals. The integrated DACs and 32-bit internal processing help create a compact generator architecture. For laboratory-grade performance, evaluate output noise, timing margins, synchronization behavior, and thermal performance across the complete operating range before calibrating the instrument.
推荐
推荐产品汇总
工程参考数据: ADV7174WBCPZ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADV7179WBCPZ |
|---|---|---|
| Product Type | Integrated PAL/NTSC digital video encoder | Integrated PAL/NTSC digital video encoder |
| Brand | Analog Devices | Analog Devices |
| Package | 40-LFCSP-WQ (6x6) | 40-LFCSP-WQ (6x6) |
| Digital Video Input | CCIR-601 4:2:2, 8-bit component data | CCIR-601 4:2:2, 8-bit component data |
| Video DAC Resolution | 10 bit | 10 bit |
| Video Signal-to-Noise Ratio | 80 dB | 80 dB |
| Clock Requirement | Single 27 MHz clock, 2x oversampling | Single 27 MHz clock, 2x oversampling |
| Macrovision 7.1 | Supported on ADV7174 | Not identified as an ADV7179 feature |
| Copy Generation Management | CGMS | CGMS |
| Wide-Screen Signaling | WSS | WSS |
关键差异点
- Macrovision 7.1 support distinguishes the ADV7174 from ADV7179 (对比 ADV7179WBCPZ)
- Integrated conversion reduces external video signal-chain complexity (对比 ADV7179WBCPZ)
- Single-clock operation simplifies synchronization (对比 ADV7179WBCPZ)
设计说明
Follow the exposed-pad land pattern and pin numbering in the Analog Devices package drawing. The 40-lead LFCSP-WQ uses a 6 mm by 6 mm body and includes an exposed thermal pad, so the pad must connect to the intended ground and solder-plane structure specified by the datasheet. Place the 27 MHz source and decoupling connections close to the device, and route digital video inputs away from the analog output and power-return paths.
Preserve the source-video timing required for CCIR-601 4:2:2 8-bit or BT.656 YCrCb operation and provide the specified single 27 MHz clock. Avoid long stubs and unnecessary test-point branches on high-speed digital video nets. Keep analog video traces short and well controlled, particularly when the board also carries switching regulators or high-speed digital logic, because the encoder’s specified 80 dB video SNR cannot be retained if the system introduces excessive noise or ground disturbance.
Use the exposed pad as the primary thermal path and provide uninterrupted copper beneath the device rather than relying on narrow thermal-via arrays alone. Validate junction temperature and output stability at the highest expected ambient temperature and supply condition. Because the available product information does not state the complete operating-temperature range or package thermal resistance, the finished design should derive those limits from the manufacturer documentation and measured power dissipation before production release.
合规信息
The exact ordering-code compliance declarations are not stated in the available product information. Confirm current RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation with Analog Devices before production release.