ADV7800BSTZ-150 10-Bit Video Decoder | Analog Devices
料号: ADV7800BSTZ-150 ✓ 量产中ADV7800BSTZ-150 概述
A video decoder is an interface IC that converts analog television signals into digital pixel data suitable for display, capture, conversion, or embedded processing. Within the signal-chain hierarchy, the ADV7800BSTZ-150 acts as an analog-to-video interface between composite or S-Video sources and digital video-processing logic. Its integrated 3D comb filter and graphics digitizer reduce the number of separate signal-conditioning blocks required in legacy video equipment.
The principal feature set includes 10-bit video processing, support for PAL, NTSC, and SECAM standards, conversion from composite or S-Video inputs, digital ITU-R BT.656 output, and integrated 3D comb filtering. These capabilities make the device appropriate for professional video conversion, broadcast-related equipment, video test systems, industrial imaging, and legacy audiovisual equipment requiring standardized digital video output. The wide 176-lead package supports extensive analog, digital, clock, power, and configuration connectivity.
The component integrates several signal-processing stages in one package. Composite input decoding and S-Video handling precede digital pixel generation, while the 3D comb filter separates luminance and chrominance information and reduces cross-color artifacts. The graphics digitizer produces digital video data compliant with ITU-R BT.656, allowing the output to connect directly to digital video processors, scalers, capture systems, or display controllers when their electrical interfaces are compatible.
Typical applications include PAL, NTSC, and SECAM video conversion; SDTV and HDTV-related interface equipment; broadcast monitoring; audiovisual test and measurement; digital video capture; and industrial systems that still accept legacy analog television formats. The manufacturer datasheet should be consulted for clocking, register programming, synchronization standards, supply requirements, analog input configuration, and exact digital-interface details before finalizing a board design.
PCB implementation requires careful attention to analog and digital signal separation, clock routing, grounding, and decoupling around this large mixed-signal IC. Use the manufacturer’s recommended pin assignments and reference layouts, preserve continuous return paths beneath the package where applicable, and validate the complete composite or S-Video front end for noise, impedance matching, and connector isolation.
This page provides a focused product view that combines the identified video functions, package information, purchasing workflow, practical design guidance, and a documented comparison with closely related ADV7800 and ADV7802 devices. It is intended to help engineers determine functional suitability before completing pin-level and timing validation with the official device documentation.
直接替换替代料: ADV7800BSTZ-150 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ADV7800BSTZ-150 (相同外形与封装尺寸) ——差异在于 Device Type, Video Processing Resolution.
ADV7800BSTZ-80
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
ADV7802BSTZ-150
✅ 直接替换联系询价
查看数据手册 →ADV7800BSTZ-150 规格参数
| Device Type | 3D comb filter, video decoder, and graphics digitizer |
| Architecture | Single-chip implementation |
| Video Processing Resolution | 10-bit |
| Supported Video Standards | PAL, NTSC, and SECAM |
| Supported Analog Input Formats | Composite and S-Video |
| Digital Output Format | ITU-R BT.656 |
| Comb Filter | 3D comb filter |
| Graphics Digitizer | Integrated graphics digitizer |
| Package Type | 176-lead LQFP |
| Package Dimensions | 24 x 24 mm |
| 安装类型 | Surface mount |
| Lead Count | 176 leads |
ADV7800BSTZ-150 24 x 24 mm 引脚配置指南
ADV7800BSTZ-150(24 x 24 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: ADV7800BSTZ-150.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADV7800BSTZ-150 适用于 6 应用s: Multiformat Video Conversion, Broadcast Video Monitoring, Legacy Video Capture, Industrial Video Test Equipment, SDTV and HDTV Interface Equipment, Professional Audiovisual Conversion.
Multiformat Video Conversion
The ADV7800BSTZ-150 fits multiformat conversion equipment that must accept PAL, NTSC, or SECAM sources while presenting a common digital interface to downstream logic. Its composite and S-Video inputs feed the integrated 3D comb filter, video decoder, and 10-bit graphics digitizer, which produces an ITU-R BT.656 pixel stream. This consolidation reduces the need for separate comb-filter, decoder, and digitizer blocks. The design must still verify analog signal levels, synchronization behavior, permitted clock rates, and output timing against the manufacturer datasheet.
推荐
Broadcast Video Monitoring
ADV7800BSTZ-150 is appropriate for monitoring and conversion hardware that ingests legacy PAL, NTSC, or SECAM video and needs a repeatable digital representation for measurement or display. Its 10-bit processing path, integrated 3D comb filter, and ITU-R BT.656 output can support analysis, capture, or downstream scaling. In a monitoring instrument, analog connector isolation, synchronization stability, and clock jitter are as important as nominal decoder functionality, so validate those parameters on the final signal path.
推荐
Legacy Video Capture
The ADV7800BSTZ-150 can serve as the analog front end in a legacy video-capture system that receives composite or S-Video and must deliver digital pixels to an FPGA, processor, or video controller. Its integrated decoder and graphics digitizer simplify the boundary between analog source equipment and digital capture logic. Design the input network for the expected source impedance and connector losses, preserve clean grounds, and confirm the exact ITU-R BT.656 timing mode required by the capture device.
推荐
Industrial Video Test Equipment
ADV7800BSTZ-150 is suitable for industrial inspection or video test equipment that must analyze or convert standardized analog television signals. Its multiformat PAL, NTSC, and SECAM decoding provides a common ITU-R BT.656 output that can be evaluated with digital capture logic. The mixed-signal implementation requires careful grounding and decoupling, particularly when the analog input and digital test circuitry share a board. Add test access for composite and S-Video sources, and use the manufacturer reference layout as the layout baseline.
推荐
SDTV and HDTV Interface Equipment
ADV7800BSTZ-150 is relevant to interface equipment identified for 10-bit SDTV and HDTV applications that accepts legacy analog video and produces digital ITU-R BT.656 output. The integrated comb filter, decoder, and digitizer can simplify conversion stages around professional video subsystems. The key engineering constraint is ensuring that the selected raster, pixel clock, synchronization scheme, and data timing all fall within the device’s documented operating envelope. Confirm these details in the manufacturer datasheet before assigning the part to a production format.
推荐
Professional Audiovisual Conversion
ADV7800BSTZ-150 fits professional audiovisual conversion equipment designed to bridge older analog video formats with digital processing systems. Composite and S-Video compatibility, integrated 3D filtering, and ITU-R BT.656 output provide a clear signal path from source to processor. Because the device combines substantial analog input circuitry with a large digital interface, keep high-current and switching supplies away from sensitive input routes and provide local bypass capacitance. Confirm output logic levels and timing before connecting it to an FPGA or display controller.
推荐
推荐产品汇总
工程参考数据: ADV7800BSTZ-150 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADV7800BSTZ-80 | ADV7802BSTZ-150 |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 176-LQFP (24x24) | 176-LQFP (24x24) | 176-LQFP (24x24) |
| Ordering Grade | -150 | -80 | -150 |
| Device Family | ADV7800 | ADV7800 | ADV7802 |
关键差异点
- Combines decoding and filtering in one device (对比 ADV7802BSTZ-150)
- Configured for the -150 performance grade (对比 ADV7800BSTZ-80)
- Direct multiformat digital output path (对比 ADV7802BSTZ-150)
设计说明
Use the manufacturer reference layout as the foundation for the 176-lead LQFP. Keep composite and S-Video traces away from switching supplies, clock generators, and high-speed digital outputs. Route sensitive inputs away from board edges and connectors where possible, use a continuous ground reference, and place analog-interface parts close to the inputs. Because this device combines a wide-ranging video decoder with a large digital interface, small return-path discontinuities can affect both analog signal quality and digital timing.
Place the required bypass capacitors at the supply and ground pins exactly as shown in the manufacturer application circuit, with short traces and an adjacent ground return. Separate analog and digital supply distribution where the device documentation calls for it, and prevent high-current return paths from sharing the sensitive analog ground area. Verify ripple, startup sequencing, and clock stability at the actual regulator rather than only measuring them at the power entry point.
Treat composite and S-Video inputs as high-impedance analog nodes even though they are processed internally by a digital-output decoder. Use the documented source impedance and input network, minimize stub lengths, and maintain controlled return paths to reduce reflections and noise coupling. Validate the design with the worst-case source and cable conditions because a clean decoder result on a bench does not guarantee the same composite eye quality with long or poorly terminated interconnects.
Do not assume that a shared family name or identical 176-LQFP footprint proves that ADV7800BSTZ-80 or ADV7802BSTZ-150 is a drop-in substitute. Compare suffix-specific clock limits, supply requirements, register behavior, synchronization features, analog inputs, and every unused pin. Also do not substitute a device with an ITU-R BT.656 output without checking active-edge timing, blanking intervals, voltage levels, and the exact raster format required by the downstream device.
合规信息
No specific compliance declarations were present in the cited product and distributor pages. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status in the current manufacturer documentation.