AFS600-2PQ208I - 600K Gate Flash FPGA | Microchip | Industrial
料号： AFS600-2PQ208I ✓ 量产中AFS600-2PQ208I 概述
A field-programmable gate array is a reconfigurable digital semiconductor that combines programmable logic, embedded memory, and configurable I/O blocks in one integrated circuit. An FPGA belongs to the broader semiconductor hierarchy of programmable logic devices, alongside complex programmable logic devices and programmable system-on-chip devices. The Fusion architecture adds configurable analog, large flash-memory blocks, and clock-generation resources to conventional programmable logic.
The AFS600-2PQ208I provides 95 I/Os, 4,608-bit dual-port SRAM or FIFO blocks, and flash-memory resources within a monolithic device. Its nonvolatile configuration supports designs that must retain their programmed behavior through power loss. The -40 °C to +85 °C operating-temperature range identifies this suffix as an industrial-temperature option suitable for equipment expected to operate across extended environmental ranges.
Technical differentiation comes from the combination of 600,000 system gates, a maximum stated system performance of 350 MHz, a 1.5 V supply, and a 208-pin PQFP package. The PQ208 package provides 95 usable I/Os according to the verified distributor data, while the listed 28 mm by 28 mm body size supports board layouts requiring a relatively high pin count. Its flash-based configuration distinguishes it from SRAM-programmed FPGAs that must be reloaded after every power-up.
Typical uses include industrial control, communications equipment, instrumentation, embedded signal processing, and mixed-signal control systems where deterministic logic, nonvolatile configuration, and configurable I/O are useful. The integrated analog and mixed-signal resources can reduce the need for separate discrete components when the selected device and its board-level design support the required signal paths.
Designers should verify the exact pinout, configuration requirements, supported I/O standards, clocking topology, power-supply sequencing, and programming toolchain before committing a PCB. The verified data does not provide complete pin names or detailed electrical tables, so those values must be checked against the manufacturer documentation rather than inferred from the package name.
This page consolidates verified distributor specifications, temperature and package data, pricing status, application guidance, and the available same-package replacements. It also distinguishes confirmed drop-in candidates from unspecified cross-brand devices, helping procurement and engineering teams evaluate the AFS600-2PQ208I without implying unverified compatibility.
直接替换替代料： AFS600-2PQ208I ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： AFS600-2PQ208I （相同外形与封装尺寸） ——差异在于 Configuration Memory, Process Technology, System Gates.
AFS600-PQ208I
✅ 直接替换📋 参考替代料（不在目录中）
AFS600-2PQ208
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
AFS600-PQ208
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →AFS600-2PQ208I 最大额定值与电气特性
| Device Type | Fusion field-programmable gate array (FPGA) |
| System Gates | 600,000 gates |
| Number of Logic Elements | 7,000 LE |
| Maximum System Performance | 350 MHz |
| Process Technology | 130 nm CMOS |
| Metal Layers | 7 layers |
| Configuration Memory | Nonvolatile flash |
| Number of I/O | 95 I/O |
| 工作电源电压 | 1.5 V |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +85 °C |
| 安装方式 | SMD/SMT |
| 封装 | 208-pin PQFP |
| Package Dimensions | 28 mm x 28 mm |
| Embedded SRAM or FIFO Block | 4,608-bit dual-port SRAM or FIFO block |
| Series | AFS600 |
| Logic Family | CMOS |
| RoHS 状态 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
AFS600-2PQ208I 28 mm x 28 mm 引脚配置指南
AFS600-2PQ208I（28 mm x 28 mm 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： AFS600-2PQ208I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AFS600-2PQ208I 适用于 6 应用s: Industrial Control Systems, Communications Equipment, Test and Measurement Instrumentation, Embedded Signal Processing, Data Acquisition and Control, Mixed-Signal Control Platforms.
Industrial Control Systems
The AFS600-2PQ208I fits industrial controllers that require deterministic programmable logic, 95 I/Os, and operation across -40 °C to +85 °C. Its 600,000 system gates and maximum stated performance of 350 MHz provide capacity for sequencing, state-machine, communication, and protection logic in one FPGA. The flash-based configuration is valuable when the controller must retain its programmed behavior during power interruption or restart. An implementation could place the device between field sensors and actuators, using configurable I/O for digital inputs, machine outputs, and communication interfaces. Designers should budget the 208-pin PQFP footprint carefully, provide the documented 1.5 V supply and required I/O references, and verify timing margins against the industrial control loop.
推荐
Communications Equipment
The AFS600-2PQ208I is suitable for communications equipment that needs parallel logic, protocol handling, and nonvolatile configuration in a single 208-pin PQFP device. Its 95 I/Os provide substantial board-level connectivity, while the 350 MHz stated system performance can support clocked protocol and data-processing functions. Flash configuration allows the equipment to retain its operational bitstream during power loss, reducing the complexity associated with mandatory external configuration reloads. In a communications design, the FPGA could implement framing, buffering, interface adaptation, and supervisory logic around external transceivers. The exact I/O voltage standards, clock inputs, transceiver interfaces, and timing requirements are not present in the verified snippets and must be confirmed before implementation.
推荐
Test and Measurement Instrumentation
The AFS600-2PQ208I can support instrumentation requiring coordinated control, acquisition sequencing, data formatting, and a substantial number of external connections. Its 7,000 logic elements and 600,000 system gates provide configurable logic resources, while the 4,608-bit dual-port SRAM or FIFO blocks identified in the verified family data can assist local buffering and clock-domain interfaces. The 208-pin PQFP package exposes 95 I/Os according to the distributor listing. A practical instrument could use the FPGA for trigger handling, timing control, status aggregation, and interface conversion. Because no complete pinout or electrical table was provided in the search results, the design must be checked against the manufacturer documentation for allowable I/O standards, clocking, configuration pins, and supply requirements.
推荐
Embedded Signal Processing
The AFS600-2PQ208I is appropriate for embedded signal-processing tasks that benefit from parallel, reconfigurable logic and configurable mixed-signal resources. Its maximum stated system performance of 350 MHz supports clocked filtering, correlation, data conversion, and sampling-control functions when the design’s timing and I/O requirements are satisfied. The Fusion family’s configurable analog and flash-memory capabilities can reduce system partitioning compared with a design built from separate programmable logic and analog components. The verified data identifies 4,608-bit dual-port SRAM or FIFO blocks for local storage and flow control. Engineers should evaluate fixed-point architecture, ADC or sensor interface requirements, clock-domain crossings, and deterministic latency before assigning functions to the FPGA.
推荐
Data Acquisition and Control
The AFS600-2PQ208I can act as the central coordination device in a data-acquisition system requiring 95 I/Os and flexible programmable logic. Its 600,000 system gates and 350 MHz maximum stated performance provide resources for multiplexing control, sample sequencing, threshold logic, and data formatting. Nonvolatile flash configuration is especially useful in unattended equipment because the acquisition configuration remains available after a power interruption. The device could coordinate external analog-to-digital converters, sensors, memory, and a communications interface while the PQFP package simplifies assembly relative to an ultra-fine-pitch FPGA. Engineering validation must include the 1.5 V supply requirement, configuration behavior, supported I/O standards, and timing margins for each acquisition clock domain.
推荐
Mixed-Signal Control Platforms
The AFS600-2PQ208I is well matched to mixed-signal control platforms because the Fusion architecture integrates configurable analog, large flash-memory blocks, clock-management circuitry, and programmable logic. The verified manufacturer-family description identifies the monolithic combination of analog and digital resources, while the specific part is listed with 600,000 system gates, 95 I/Os, and a 1.5 V supply. A designer could use the FPGA to coordinate sensor excitation, data conversion, control calculations, and actuator outputs without separating every function into dedicated ICs. The 208-pin PQFP package also provides a defined surface-mount assembly option. Exact analog input ranges, ADC performance, output characteristics, and channel assignments are unavailable in the supplied results and must be established from the complete manufacturer documentation.
推荐
推荐产品汇总
工程参考数据： AFS600-2PQ208I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AFS600-PQ208I | AFS600-2PQ208 | AFS600-PQ208 |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 208-pin PQFP | 208-pin PQFP - same | 208-pin PQFP - same | 208-pin PQFP - same |
| System Gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates |
关键差异点
- Verified industrial temperature range （对比 AFS600-PQ208)
- Explicit -2 performance designation （对比 AFS600-PQ208I)
- Complete confirmed package and I/O identity （对比 AFS600-2PQ208)
设计说明
Design the power tree from the complete manufacturer electrical tables rather than assuming that the listed 1.5 V operating supply is the only rail required by the PQ208 device. Confirm the core and I/O supply limits, allowable sequencing, current per I/O bank, and configuration-pin requirements. Decoupling values and rail tolerances are not included in the verified snippets and must not be guessed; follow the manufacturer’s recommended network and place it directly beside the corresponding package pins.
Reserve the exact 208-pin PQFP land pattern and verify courtyard, lead pitch, solder-mask, and paste geometry against the selected package drawing. The verified package dimensions are 28 mm by 28 mm, but the complete mechanical drawing is required to establish pin centers and exposed or thermal features. Keep high-speed clock and configuration traces short, provide a clean return path, and place configuration access or programming interfaces where they do not interfere with sensitive analog or clock routing.
The AFS600-2PQ208I can operate up to 350 MHz according to the verified data, but the complete pinout and supported I/O standards are not supplied. Before assigning pins, compare every external interface with the manufacturer’s I/O voltage, drive-strength, slew-rate, and timing tables. Use source-synchronous or differential routing only where the selected bank and board stack-up explicitly support it, and validate clock jitter, crosstalk, and return-path continuity with signal-integrity analysis.
Do not treat the AFS600-2PQ208I, AFS600-PQ208I, and other AFS600 suffix variants as automatically interchangeable. The verified cross-reference explicitly notes that Fusion devices in the same package can have exceptions, and the PQ208 package is specifically mentioned as an exception between AFS250 and AFS600 devices. Confirm the complete part-number ordering code, timing grade, temperature grade, pinout, configuration behavior, and footprint before approving any substitution.
合规信息
The verified manufacturer-family search result identifies the 130 nm, seven-layer-metal, flash-based CMOS process, but the supplied data does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. The industrial temperature rating is not equivalent to AEC-Q100 qualification.
