AKM

AK4103AVF 192kHz 24-Bit Audio Transmitter | AKM

料号: AK4103AVF ✓ 量产中
24-VSOP Package 192 kHz Speed
最小起订量: 1 |

AK4103AVF 概述

The Asahi Kasei Microdevices AK4103AVF is a two-channel audio transmitter IC for digital audio signal transmission, featuring a 24-bit DIT interface and operation up to 192 kHz in a 24-VSOP package. The part is designed for professional audio, broadcast, communications, and digital audio equipment where a high-resolution stereo audio source must be serialized into a digital transmission format. Its 24-bit resolution supports detailed digital audio conversion, while the 192 kHz sampling capability supports high-rate audio paths.

An audio transmitter IC converts parallel or internally formatted audio data into a serial digital stream for transmission between audio devices, converters, routers, and digital mixing equipment. Within the signal chain, it belongs to the digital audio interface category and supports the broader hierarchy of audio codec, interface IC, and semiconductor. The AK4103AVF is particularly relevant when an audio system requires a dedicated two-channel digital transmission stage rather than a general-purpose transceiver.

The principal identifiable features are two audio channels, 24-bit resolution, and a maximum sampling frequency of 192 kHz. The 24-VSOP package supports surface-mount PCB assembly and is identified in distributor documentation as a 24-LSSOP-compatible package. The exact interface voltage, clocking requirements, channel format, power-supply range, and control-register organization should be confirmed against the manufacturer datasheet before a new design is released.

AK4103AVF is positioned for applications requiring high-resolution stereo audio transport, including digital mixing equipment, broadcast consoles, professional audio interfaces, studio signal routing, and embedded audio transmission subsystems. The device can be used where the transmitter must preserve 24-bit word length while supporting high-rate sampling. System designers should ensure that the surrounding converter, serializer, receiver, and clock architecture match the transmitter's required digital format.

The most important design consideration is interface verification. Because the AK4103AVF is a dedicated audio transmitter, its data timing, master/slave mode, word-length setting, clock polarity, and power requirements determine compatibility with the rest of the signal chain. Review the pin-description and timing diagrams in the manufacturer datasheet before assigning PCB tracks or connecting source equipment.

This page provides practical application guidance, interface-oriented design notes, verified distributor references, and structured technical context for engineers evaluating AK4103AVF in high-resolution stereo audio systems.

直接替换替代料: AK4103AVF ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

AK4103AVF 规格参数

Product Type Audio transmitter IC
Number of Channels 2 channels
Audio Data Resolution 24 bit
Maximum Sampling Frequency 192 kHz
Architecture DIT digital audio transmitter
封装 24-VSOP
Package Type 24-LSSOP-compatible surface-mount package
Package Width 5.60 mm
Package Length 0.220 inch
安装类型 Surface mount
Audio Interface Type Digital audio transmitter
Signal Direction Audio output transmission
Word-Length Capability 24 bit
Sampling-Rate Capability Up to 192 kHz

AK4103AVF 0.220 inch 引脚配置指南

AK4103AVF(0.220 inch 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

AK4103AVF 的 0.220 inch 封装引脚图

暂无详细引脚数据: AK4103AVF.

请参阅 数据手册 以查看完整引脚配置。

典型应用

AK4103AVF 适用于 6 应用s: Professional Audio Interface, Digital Mixing Console, Broadcast Audio Routing, Studio Recording and Mastering, Digital Audio Router, High-Resolution Audio Test Equipment.

🎧

Professional Audio Interface

The AK4103AVF fits a professional audio interface that transports two high-resolution digital channels toward a DSP, router, or recorder. Its 24-bit resolution preserves fine amplitude detail, while operation up to 192 kHz supports high-rate studio and mastering workflows. Place the transmitter behind the source converter and configure the clock and serial data to match the required digital audio format. The principal design benefit is a dedicated two-channel transmission stage with a clearly defined resolution and sampling-rate target. Confirm clock topology, input coding, voltage levels, and data timing against the manufacturer datasheet before laying out the board.

🎚️

Digital Mixing Console

AK4103AVF can serve as the stereo digital-audio output transmitter in a mixing console or digital signal-processing platform. Two channels, 24-bit word length, and a maximum sampling frequency of 192 kHz provide a clear format target for transmitting console bus data to external converters, routers, or recording equipment. The transmitter should receive a compatible digital source and operate within the clock domain required by the downstream device. Its dedicated transmitter function simplifies signal routing compared with using a codec that also performs conversion. Validate master or slave clock behavior, data alignment, and the permitted serial format before integrating it with the console's larger control architecture.

📡

Broadcast Audio Routing

The AK4103AVF is appropriate for broadcast audio routing equipment that transports two high-resolution channels between production, processing, and transmission areas. A 24-bit, 192 kHz-capable transmitter supports professional signal paths where precise word length and high sampling rates are important. The device is especially relevant when the routing architecture already uses a compatible serial audio format and needs a dedicated output stage. Install it close to the source and destination interface electronics, then control clock jitter and ground-current paths. Before approving the design, confirm that the routing platform uses the transmitter's required data coding, framing, and clock relationship.

🖥️

Studio Recording and Mastering

AK4103AVF fits a studio recording or mastering signal chain that needs lossless digital transport between a converter and a digital console, workstation, or storage interface. The two-channel architecture targets standard stereo paths, while 24-bit resolution and support for up to 192 kHz accommodate high-resolution production requirements. Its transmitter role prevents the need to allocate a general-purpose codec solely for serialization. The design must synchronize the source converter, transmitter clock, and receiving device within one coherent timing domain. Use controlled impedance routing for the digital clock and data lines, and confirm in the datasheet whether channel data is framed, packed, or otherwise coded before final board sign-off.

🌐

Digital Audio Router

The AK4103AVF can be integrated into a digital audio router as a two-channel transmit endpoint. Its 24-bit resolution preserves source word length, and its 192 kHz capability supports routes used in high-rate studio and broadcast environments. In a router, the transmitter's clock and data lines should be routed together to minimize timing skew and should be isolated from switching-power and high-current analog paths. The surrounding FPGA or controller must generate or receive the clock according to the device's supported topology. A practical advantage is that a dedicated transmitter can operate alongside separate routing and receiving functions, but the format and timing configuration must be verified against the manufacturer datasheet.

🔧

High-Resolution Audio Test Equipment

AK4103AVF is suitable for digital audio test and measurement equipment that must generate or monitor a controlled two-channel, high-resolution transport. The 24-bit format and 192 kHz capability allow the instrument to support test streams beyond standard CD resolution. A practical implementation uses the AK4103AVF to transmit a defined digital stream into the analyzer, comparator, or loopback section, with clock generation derived from a stable source. This arrangement can help evaluate source converters and digital transmission paths under controlled word length and sampling conditions. Confirm supported frame structure, clock polarity, setup and hold timing, and input coding so that the test generator reproduces the intended reference signal.

What is the AK4103AVF?
The AK4103AVF is a two-channel, 24-bit digital audio transmitter IC from Asahi Kasei Microdevices/AKM. According to the manufacturer datasheet listing, it uses a DIT architecture and supports sampling frequencies up to 192 kHz. The device is intended for transmitting high-resolution stereo digital audio within professional audio, broadcast, and related equipment.
What are the key specifications of AK4103AVF?
The key AK4103AVF specifications are two audio channels, 24-bit resolution, and operation up to 192 kHz sampling frequency. The part is packaged in a 24-VSOP package, also described in distributor documentation as a 24-LSSOP-compatible surface-mount package. Additional timing, voltage, and clock details should be taken from the manufacturer datasheet.
Where can I download the AK4103AVF datasheet PDF?
The AK4103AVF datasheet PDF is available through the manufacturer-data listing at https://www.alldatasheet.com/datasheet-pdf/pdf/452798/AKM/AK4103AVF.html. It identifies the component as a 192 kHz, 24-bit DIT audio transmitter. Use the pin-description, electrical-characteristics, timing, and application sections when finalizing a circuit.
Where can I find the AK4103AVF pinout?
The AK4103AVF pinout is documented in the manufacturer datasheet and is also referenced by distributor listings for the 24-VSOP package. Start with the package drawing and pin-description table, then confirm every power, ground, clock, data, and control connection before PCB routing. The AK4103AVF uses a 24-pin package according to the product listing.
Is AK4103AVF suitable for high-resolution audio equipment?
Yes, AK4103AVF is suitable for high-resolution stereo audio equipment because it provides 24-bit resolution and supports sampling rates up to 192 kHz. These characteristics fit digital consoles, studio routing, broadcast equipment, and professional audio interfaces that require more than standard CD-resolution transport. The remaining system clock and voltage requirements must match the datasheet.
How does AK4103AVF compare with a general-purpose audio codec?
The AK4103AVF is a dedicated digital audio transmitter, whereas a general-purpose audio codec commonly includes both conversion and transmit or receive functions. The AK4103AVF concentrates on serializing a two-channel, 24-bit digital audio stream at up to 192 kHz. This makes it appropriate when the source converter and transport format are already defined.
When should I choose the AK4103AVF for a stereo audio path?
Choose the AK4103AVF when the design needs a dedicated two-channel digital transmitter with 24-bit resolution and up to 192 kHz sampling. It is most useful in professional audio, broadcast, studio, and signal-routing products where the receiver and clock architecture already match its digital interface. It is less suitable when analog-to-digital conversion is also required.
What is the best drop-in replacement for AK4103AVF?
No verified drop-in replacement for the AK4103AVF was identified from the available cross-reference results. A valid replacement must match the 24-VSOP footprint, pin assignments, digital timing, 24-bit word length, clocking, power levels, and supported audio format. Use the Request a Quote form on this page for assistance identifying an available replacement or equivalent.
Can another AK4103-series device replace AK4103AVF?
A replacement should be selected only after its datasheet confirms pin-to-pin compatibility with the AK4103AVF, including power, clock, serial-data, control, and format functions. The available cross-reference results do not identify a qualified AK4103-series substitute. Request the latest manufacturer documentation before treating a related part as a drop-in replacement.
What is the best Asahi Kasei Microdevices equivalent for AK4103AVF?
No verified Asahi Kasei Microdevices/AKM drop-in equivalent for the AK4103AVF was identified. The device's defining requirements are its 24-VSOP package, two-channel DIT transmitter function, 24-bit resolution, and 192 kHz operation. A candidate must meet all four conditions and preserve the complete digital interface before PCB substitution is acceptable.
What clock and signal-integrity checks are needed for AK4103AVF?
The AK4103AVF implementation should be checked against the datasheet timing diagrams for clock frequency, setup and hold requirements, data validity, and master or slave operation. Keep the transmitter clock and serial-data routing away from noisy switching nodes and provide a controlled ground return. The exact timing values must be taken from the manufacturer documentation.
Does AK4103AVF require external analog-to-digital converters?
The AK4103AVF is identified as a digital audio transmitter IC and does not by itself provide the documented functionality of an analog-to-digital converter. An upstream converter or digital audio source is therefore needed to create the transmitter's input format. Confirm the required input coding, clock relationship, and word length against the datasheet.
Where can I buy AK4103AVF online?
AK4103AVF can be requested through the Request a Quote form on this page. The listing identifies the part as a two-channel, 24-VSOP audio transmitter and indicates current stock through an authorized component listing. The quote form allows the requested quantity, delivery location, and target logistics to be reviewed before an order is placed.
What is the price of AK4103AVF?
Current commercial terms for AK4103AVF should be confirmed through the Request a Quote form on this page because pricing and availability can change with quantity and market conditions. The structured listing references a current market listing for the exact MPN, while the final customer price is calculated for the requested order configuration.
What is the lead time for AK4103AVF?
The current lead time for AK4103AVF should be confirmed through the Request a Quote form on this page. Lead time can depend on order quantity, packaging, current inventory, and destination. The distributor listing identifies the component as in stock, but the quote workflow should provide the current delivery commitment for the requested quantity.
Is AK4103AVF currently in stock?
Yes, the current component listing identifies AK4103AVF as in stock. Stock quantities are operationally dynamic, so use the Request a Quote form on this page to confirm the amount available for the requested quantity and the applicable delivery schedule. The exact manufacturer order quantity and standard packing configuration should also be confirmed.

工程参考数据: AK4103AVF ——对比、设计指导和合规信息。

选型指南

Choose AK4103AVF when a professional audio product needs a dedicated two-channel digital transmitter with 24-bit resolution and operation up to 192 kHz. It is a strong fit for broadcast routing, studio interfaces, digital consoles, test equipment, and high-resolution audio converters that already produce a compatible digital stream. The device is less appropriate when analog-to-digital conversion is required in the same stage, because its documented role is transmission rather than conversion. No verified drop-in alternative was identified, so a replacement should be accepted only after its 24-VSOP footprint, pin assignments, clocking, data format, power requirements, and register behavior have all been compared with the AK4103AVF datasheet. For related general-purpose codec designs, evaluate conversion requirements, channel count, latency, clock architecture, and signal format rather than choosing on package or sample-rate similarity alone.

与替代料对比

参数 本产品
Brand Asahi Kasei Microdevices/AKM
Package 24-VSOP
Product Type Audio transmitter IC
Audio Channels 2 channels
Bit Resolution 24 bit
Maximum Sampling Frequency 192 kHz
Architecture DIT
Mounting Type Surface mount

关键差异点

  • Dedicated two-channel digital audio transmitter (对比 General-purpose audio codec)
  • High-resolution sampling capability (对比 Standard CD-resolution audio path)
  • Compact surface-mount integration (对比 Larger discrete transmitter implementation)

设计说明

Route the serial data and clock as a tightly coupled group and keep them away from switching nodes, high-current outputs, and connector entry points. Verify setup time, hold time, clock polarity, and data validity directly against the manufacturer timing diagrams. If the transmitter operates from an externally supplied clock, use a clean reference and avoid introducing unnecessary clock division in the source device.

Use the manufacturer pin-description table to assign power, ground, clock, data, and control pins before PCB layout. Place decoupling capacitors at the appropriate supply pins according to the recommended application circuit, and provide a low-impedance ground connection beneath the device where the package design permits. Do not infer pin functions from neighboring devices in the same product family.

A matching package name does not by itself establish replacement compatibility. Review word length, sampling rate, clock master or slave mode, serial coding, framing, supply voltage, and control-register behavior before approving another device as a substitute. Keep the AK4103AVF data sheet with the production documentation and preserve the exact ordering code to prevent package or revision mismatches.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Compliance declarations are not stated in the available product references. AEC-Q100 qualification is treated as not applicable because the AK4103AVF is an audio interface IC rather than an automotive-qualified device.

数据核验日期: 2026-11-16 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

AK4103AVF datasheet AK4103AVF datasheet pdf AK4103AVF pinout AK4103AVF specifications AK4103AVF equivalent AK4103AVF replacement AK4103AVF cross reference AK4103AVF 24-VSOP AK4103AVF 192kHz 24-bit AK4103AVF price AK4103AVF stock AK4103AVF audio transmitter

相关元器件 & 术语

Asahi Kasei Microdevices/AKM AK4103AVF audio transmitter IC digital audio transmitter DIT architecture audio codec interface IC semiconductor 24-bit resolution 192 kHz sampling frequency two-channel audio 24-VSOP 24-LSSOP-compatible package surface mount digital audio interface serial audio data audio clock broadcast audio professional audio studio recording digital mixing console
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情