AKM (Asahi Kasei Microdevices)

AK4161EN - 6-Channel Capacitive Touch Sensor IC | AKM

料号: AK4161EN ✗ 停产
16-pin QFN Package
最小起订量: 1 |

AK4161EN 概述

The Asahi Kasei Microdevices AK4161EN is a 6-channel capacitive touch sensor interface IC packaged in a 16-pin QFN package. It is designed to detect capacitive changes associated with touch inputs and condition those signals for use in capacitive-control panels, touch keys, and embedded human-interface systems. The device is listed as obsolete, so new designs should confirm availability and lifecycle requirements before committing to the footprint.

A capacitive touch sensor controller is an interface IC that converts changes in electrical capacitance into touch-detection information. In the product hierarchy, the AK4161EN belongs to the touch-sensor interface category, the broader sensor-interface group, and ultimately the integrated-circuit family. Unlike mechanical switches, capacitive sensing allows compact, sealed user interfaces without moving contacts, making the device type suitable for appliance controls, industrial panels, and compact electronic products.

The primary documented specifications establish a 6-channel sensing architecture in a 16-pin QFN package with an exposed-pad arrangement. Tape-and-reel packaging is identified for the EN ordering variant. The AKM datasheet also classifies the part under capacitive touch and DSP-related interface applications, allowing a host processor or control system to interpret touch activity while the front end manages the physical capacitive-sensing function.

This architecture separates sensing from application-level control: sensor electrodes are connected to the touch inputs, while the controller evaluates capacitance changes and communicates the resulting status to the surrounding system. The six-channel count allows one device to serve a keypad, slider group, or distributed set of touch zones. Exact operating voltage, host interface format, conversion timing, sensitivity settings, and electrical limits must be taken directly from the manufacturer datasheet before schematic or firmware design begins.

Typical uses include capacitive appliance panels, industrial touch controls, compact keypads, consumer-product buttons, and touch-sensitive equipment interfaces. In each case, the controller replaces mechanical contacts with a thin, non-moving sensing surface. Application quality depends on electrode geometry, panel material, guard-ring construction, routing, filtering, and the tuning procedure selected for the expected touch environment.

The principal design consideration is PCB integration. The 16-pin QFN footprint requires a correctly designed exposed-pad land pattern, short sensor traces, stable reference components, and careful separation between sensitive touch nodes and noisy system circuitry. Because the AK4161EN is obsolete, engineers should also validate availability, traceability, and any redesign path before committing to a production build.

This page organizes the available lifecycle, package, channel-count, interface, sourcing, and replacement information around the AK4161EN. It also provides application-focused design guidance and distinguishes documented facts from parameters that must be confirmed in the manufacturer datasheet, helping engineers assess an obsolete six-channel touch controller efficiently.

直接替换替代料: AK4161EN ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

AK4161EN 最大额定值与电气特性

Product Type Capacitive Touch Sensor Interface IC
Number of Sensing Channels 6 channels
封装 16-pin QFN
Package Type QFN with exposed pad
安装类型 Surface mount
Ordering Package Tape & Reel
生命周期状态 Obsolete
Sensor Category Capacitive touch
Application Category Interface sensor and DSP

AK4161EN tape & reel 引脚配置指南

AK4161EN(tape & reel 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

AK4161EN 的 tape & reel 封装引脚图

暂无详细引脚数据: AK4161EN.

请参阅 数据手册 以查看完整引脚配置。

典型应用

AK4161EN 适用于 6 应用s: Industrial Equipment Touch Panel, Appliance Capacitive Keypad, Consumer Touch Button Interface, Medical Device Control Interface, Security and Access Keypad, Smart Home Wall Control.

🏭

Industrial Equipment Touch Panel

The AK4161EN can serve as the capacitive sensing front end for a compact industrial control panel containing up to six touch zones. Its 16-pin QFN footprint supports integration beside the equipment controller, while the exposed pad provides a defined thermal and electrical connection under the manufacturer's recommended land pattern. Because the part is obsolete, engineers should reproduce the original electrode and component arrangement rather than assume a modern controller can be substituted. Verify operating-temperature range, host timing, sensitivity controls, and EMC behavior in the manufacturer datasheet before using it in machinery where false activation or missed touches could create a safety concern.

⚡

Appliance Capacitive Keypad

A six-channel capacitive touch controller is suitable for appliance keypads where sealed, non-moving buttons improve durability and appearance. The AK4161EN can evaluate multiple electrodes distributed across a control membrane, allowing functions such as power, mode, and timing selection without mechanical switches. Layout quality is critical: sensor traces should be short, the exposed-pad land pattern must follow the package drawing, and reference components should be placed where the datasheet specifies. Confirm the operating voltage, measurement timing, and supported electrode configurations before release, and validate the complete panel across expected humidity, contamination, and temperature conditions.

📱

Consumer Touch Button Interface

The AK4161EN can integrate capacitive buttons into a consumer product front panel while leaving interpretation of button events to the host controller. This division of responsibility allows the touch device to concentrate on capacitance measurement while the product firmware manages gestures, lighting, safety interlocks, and user feedback. Because the AK4161EN is obsolete, it is most appropriate for continuation of an existing qualified design or a carefully controlled low-volume build. Reproduce the original electrode geometry, component values, and firmware assumptions during validation, since changes in panel thickness, overlay material, or grounding can change touch performance even when the electrical circuit remains the same.

💊

Medical Device Control Interface

The AK4161EN may be evaluated for a six-zone capacitive interface in medical equipment, such as a sealed operator panel, where a non-moving surface supports cleaning and durability. Its documented 6-channel architecture and compact 16-pin QFN package can fit tightly controlled front-end electronics, but the obsolete lifecycle status requires a separate component-continuity assessment. Engineers must confirm electrical limits, operating temperature, host communication, external component requirements, and single-fault behavior in the manufacturer datasheet. Any medical use also requires application-level risk control, validated human-factors testing, and confirmation that the selected component sourcing and quality documentation satisfy the finished-product quality system.

🔒

Security and Access Keypad

A capacitive access keypad can use the AK4161EN's six channels for touch-sensitive numeric or function buttons behind a sealed surface. The compact surface-mount package allows the sensing electronics to remain close to the electrode network, which can support stable signal integrity and compact product construction. Security systems demand predictable activation and adequate immunity to false touches, so the engineering team should validate electrode spacing, guard structures, filtering, firmware debounce behavior, and environmental contaminants using the manufacturer's reference guidance. The obsolete lifecycle status must also be addressed through authorized supply assessment, lot traceability, and a planned redesign or last-time-buy strategy where continued availability is essential.

🧩

Smart Home Wall Control

The AK4161EN can support a low-profile smart-home wall controller containing six capacitive zones for lighting, scene, volume, or status functions. Its 16-pin QFN package supports space-constrained PCB layouts, and capacitive sensing removes the mechanical motion and wear associated with conventional switches. The sensing network must be designed around the finished wall panel rather than a bare board, because conductive paint, plaster, wood, insulation, grounding, and panel thickness can alter the measured capacitance. Use the manufacturer tuning procedure and recommended filter network, and test every intended touch target under realistic installation conditions. For new connected products, verify whether a currently supported controller offers stronger lifecycle assurance.

What is the AK4161EN?
The AK4161EN is a 6-channel capacitive touch sensor interface IC from Asahi Kasei Microdevices. According to the manufacturer datasheet and the AK4161EN product records, it detects capacitance changes associated with touch inputs and operates as a surface-mount IC in a 16-pin QFN package with an exposed pad.
How many touch channels does the AK4161EN support?
The AK4161EN supports 6 capacitive touch-sensing channels. This six-channel count allows one controller to monitor several touch keys or sensing zones, although the number of electrodes that can be used simultaneously depends on the operating mode and the configuration described in the AK4161EN manufacturer datasheet.
Is the AK4161EN still active?
The AK4161EN is listed as obsolete. It remains a cataloged 6-channel capacitive touch controller in a 16-pin QFN package, but an obsolete lifecycle status means new production commitments require careful supply-chain review and confirmation of availability, traceability, and long-term sourcing options.
What package does the AK4161EN use?
The AK4161EN is supplied in a 16-pin QFN package with an exposed pad. The EN ordering form is associated with tape-and-reel packaging. The PCB land pattern should follow the exact dimensions, pin numbering, thermal-pad geometry, and reflow recommendations in the manufacturer datasheet.
Where can I download the AK4161EN datasheet PDF?
The AK4161EN datasheet is available through the linked manufacturer product page and the AKM datasheet preview identified for this part. Use the document titled AK4161EN to verify pin assignments, electrical characteristics, host-interface timing, electrode configuration, application circuits, and recommended external components before beginning a PCB design.
Where can I find the AK4161EN pinout?
The AK4161EN pinout is defined in the manufacturer datasheet for the 16-pin QFN package. Use the package drawing and pin-description table to assign power, ground, interface, and touch-sensing connections; do not infer pin functions from a generic QFN footprint because exposed-pad and land-pattern details are package-specific.
Where can I buy the obsolete AK4161EN?
Use the Request a Quote form on this page to request the current AK4161EN price, stock position, minimum order quantity, lead time, date-code information, and traceability requirements. Because the device is obsolete, a request should specify whether the required quantity is for repair, continuation, or a controlled small-volume production run.
What is the current price of the AK4161EN?
The current commercial terms for the AK4161EN are available through the Request a Quote form on this page. Since AK4161EN is obsolete and catalog pricing can vary with quantity, condition, date code, traceability, and required delivery date, submit the exact quantity and inspection requirements with the quote request.
What is the lead time for an AK4161EN order?
The lead time for the AK4161EN depends on current inventory, package condition, traceability, and the requested quantity. Request a written quotation through the form on this page and state whether prototype, scheduled production, or obsolete-material inspection requirements apply so the supplier can confirm a realistic delivery commitment.
Is the AK4161EN suitable for an industrial capacitive touch panel?
The AK4161EN can be considered for a capacitive industrial touch panel because it provides 6 sensing channels in a compact 16-pin QFN package. Suitability depends on panel material, electrode spacing, required sensitivity, noise immunity, operating-temperature limits, and host timing, all of which must be checked against the manufacturer datasheet.
What is the best drop-in replacement for the AK4161EN?
No confirmed pin-compatible drop-in replacement for the AK4161EN is identified in the available cross-reference information. A valid substitute must reproduce the 16-pin QFN footprint, exposed-pad connection, 6-channel architecture, host interface, timing, electrical limits, and touch-tuning behavior; verify those requirements in both datasheets before redesigning the PCB.
Can another manufacturer replace the AK4161EN without changing the PCB?
The AK4161EN can only be replaced without PCB changes by a genuinely pin-compatible 16-QFN device with equivalent electrical and host-interface behavior. No cross-manufacturer candidate is established by the available records, so engineers should treat this as a redesign exercise unless a manufacturer explicitly documents footprint, timing, and software compatibility.
When should I choose the AK4161EN instead of a newer touch controller?
Choose the AK4161EN only when preserving an existing 16-QFN design, using its documented 6-channel architecture, or obtaining previously qualified sensor behavior is more important than current product availability. For new designs, a supported controller may be preferable when long-term sourcing, automotive qualification, wider channel count, or newer host-interface features are required.
AK4161EN vs a 6-channel touch controller: which is better for a compact keypad?
The AK4161EN is better only when an existing design already depends on its exact 16-QFN footprint, electrical behavior, and firmware register map. For a new compact keypad, a supported 6-channel controller should be selected if it offers the required sensitivity, temperature rating, interface, and long-term availability; those parameters must be compared from manufacturer datasheets.
What are the key specifications of AK4161EN that engineers should know?
The key documented AK4161EN specifications are its 6-channel capacitive touch function, 16-pin QFN package with exposed pad, surface-mount construction, tape-and-reel ordering format, and obsolete lifecycle status. The essential electrical parameters to verify in the manufacturer datasheet are supply voltage, host interface, timing, sensitivity, power consumption, and temperature range.

工程参考数据: AK4161EN ——对比、设计指导和合规信息。

选型指南

Choose the AK4161EN primarily when maintaining an existing qualified design, reproducing a proven six-channel capacitive panel, or securing a controlled continuation build of an obsolete product. Its known strengths are the 6-channel architecture, compact 16-pin QFN package, and established sensor implementation. Before committing, verify operating voltage, temperature range, host interface, timing, sensitivity controls, and the complete exposed-pad footprint against the manufacturer datasheet. Do not treat a generic six-channel touch controller as a drop-in replacement: equivalent channel count and package alone do not establish electrical, protocol, firmware, or electrode compatibility. For new high-volume, automotive, safety-critical, or long-lifecycle programs, a currently supported controller is usually the safer platform. When the AK4161EN is selected, plan supplier qualification, lot traceability, environmental validation, and a documented redesign path before production release.

与替代料对比

参数 本产品
Manufacturer Asahi Kasei Microdevices
Brand Asahi Kasei Microdevices
Package 16-pin QFN with exposed pad
Sensing Channels 6 channels
Sensor Type Capacitive touch
Lifecycle Status Obsolete
Ordering Package Tape & Reel

关键差异点

  • Documented six-channel capacitive sensing architecture (对比 No verified drop-in alternative)
  • Compact surface-mount implementation (对比 No verified drop-in alternative)
  • Established six-zone panel architecture for existing designs (对比 No verified drop-in alternative)

设计说明

Use the manufacturer package drawing to create the 16-pin QFN land pattern and exposed-pad geometry. Keep touch-sensing traces short, route them away from switching nodes and high-current return paths, and place the datasheet-recommended reference and filter components close to their associated pins. Check the assembly drawings for the exposed-pad connection, solder-mask definition, and paste pattern before releasing artwork.

Design the sensor electrode and panel stack before finalizing the PCB. Trace geometry, overlay thickness, conductive area, grounding, and guard construction can all affect capacitance and tuning. Reproduce the reference electrode and component arrangement used by the original design whenever possible, and validate each electrode across the complete enclosure rather than testing only on bare PCB material.

Do not assume that another 6-channel capacitive controller is a drop-in replacement for the AK4161EN. A valid substitute must match the 16-QFN footprint, exposed-pad connection, supply requirements, host protocol, register behavior, measurement timing, and tuning procedure. Review both datasheets and firmware requirements together; a same-channel-count part with a different interface can still require board and software changes.

Confirm the supply voltage, current consumption, power-up sequence, and required external components in the manufacturer datasheet. The AK4161EN is a sensitive analog sensing device, so supply disturbance and incorrect reference-component placement can influence measurement quality. Use the documented decoupling arrangement and keep sensitive return paths away from noisy digital and switching-current regions.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The AK4161EN is listed as obsolete. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or the documentation accompanying the exact manufacturing lot.

数据核验日期: 2026-11-16 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

AK4161EN datasheet AK4161EN pinout AK4161EN datasheet pdf AK4161EN equivalent AK4161EN replacement AK4161EN cross reference AK4161EN QFN footprint AK4161EN price AK4161EN stock Asahi Kasei AK4161EN AK4161EN capacitive touch controller AK4161EN 6 channel touch IC AK4161EN obsolete replacement AK4161EN application circuit

相关元器件 & 术语

Asahi Kasei Microdevices AKM AK4161EN capacitive touch sensor touch sensor interface IC sensor interface integrated circuit semiconductor 6-channel touch controller capacitive sensing electrode 16-pin QFN QFN family surface mount SMD exposed pad tape and reel DSP touch keypad industrial touch panel appliance control smart home interface obsolete lifecycle status RoHS REACH
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情