AK4255ET - Video Amplifier with LPF | Asahi Kasei
料号: AK4255ET ✗ 停产AK4255ET 概述
A video amplifier is an amplifier IC within the broader analog signal-processing hierarchy. Its function is to raise the level of a video signal while introducing controlled amplification and filtering. Video amplifiers may be used between image sensors, video encoders, display interfaces, and analog video processing blocks. The low-pass-filter section attenuates higher-frequency signal content, supporting bandwidth control in composite or related video paths.
The AK4255ET is supplied in a 16-pin TSSOP package, with the ET suffix identifying the tape-and-reel shipping configuration used by the manufacturer. The documented reel quantity is 1,000 units, and the associated moisture-sensitivity classification is MSL Level 1 with an Unlimited floor-life duration under the stated environmental conditions. Its surface-mount package supports compact, automated PCB assembly without through-hole insertion.
For system designers, the principal considerations are device availability, lifecycle status, PCB footprint compatibility, and the electrical requirements of the original video path. Because the AK4255ET is marked obsolete, new production designs should assess lifecycle risk before committing the part to a long-running equipment program. Legacy repairs and previously qualified designs can continue to use the documented 16-pin TSSOP footprint and reel format.
Typical video-chain uses include camera and surveillance signal conditioning, analog video input conditioning, display-driver interfaces, and retrofit of legacy video equipment. In these applications, the amplifier may sit between a source device and a downstream codec, controller, or display interface. External passive networks, power-supply filtering, grounding, and output loading must be implemented according to the manufacturer’s recommended application circuit.
PCB layout should preserve the manufacturer’s signal and return-path arrangement, particularly around the video input, output, supply, and bypass-capacitor connections. The 16-pin TSSOP footprint is sensitive to soldering defects and trace geometry, so stencil design, reflow profile, and assembly inspection should be controlled even when replacing an established board. A footprint review is essential before treating any substitute as drop-in compatible.
This page consolidates the confirmed lifecycle, package, handling, and sourcing information for the AK4255ET with engineering guidance for video-signal layouts. It also identifies where strict drop-in alternatives require additional manufacturer-level verification, helping engineers distinguish an exact footprint match from a merely similar video-amplifier specification.
直接替换替代料: AK4255ET ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料AK4255ET 最大额定值与电气特性
| Product Type | Video amplifier IC |
| Manufacturer | Asahi Kasei Microdevices |
| 生命周期状态 | Obsolete |
| Functional Category | Video Amps and Modules |
| 封装 | 16-pin TSSOP |
| 安装类型 | Surface mount |
| Shipping Package | Tape & Reel (TR) |
| Quantity per Package | 1,000 units |
| Moisture Sensitivity Level | MSL Level 1 |
| Floor Life Duration | Unlimited |
| Export Control Classification Code | EAR99 |
| Supply and Demand Status | Balanced |
| Popularity | High |
| Fake Threat in the Open Market | 92 percent |
AK4255ET 1,000 units 引脚配置指南
AK4255ET(1,000 units 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: AK4255ET.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AK4255ET 适用于 6 应用s: Legacy Camera Video Conditioning, Analog Video Input Conditioning, Video Display Interface Retrofit, Surveillance Equipment Maintenance, Industrial Video Control Panels, Audio-Video Multimedia Modules.
Legacy Camera Video Conditioning
The AK4255ET can be used in a legacy camera or surveillance signal chain where a 16-pin TSSOP video amplifier is already present on the PCB. Its low-pass-filter function belongs in the analog video-conditioning path, where unwanted high-frequency content must be controlled before reaching a downstream encoder or display circuit. The 16-pin surface-mount package supports compact board layouts and automated assembly. Because the part is obsolete, technicians should preserve the original footprint, external resistor and capacitor arrangement, and supply arrangement when repairing an established design. Confirm the exact pin assignments and operating limits against the manufacturer datasheet before replacing surrounding components or making board-level changes.
推荐
Analog Video Input Conditioning
The AK4255ET fits an analog video input-conditioning block that requires a dedicated video amplifier and low-pass filtering in a compact 16-pin TSSOP package. Such a stage can receive a video signal from an imaging or graphics block and present a conditioned signal to a controller, capture device, or display interface. The low-pass-filter function helps limit out-of-band signal content, while the surface-mount package preserves PCB area. Maintenance engineers should maintain the original coupling and feedback networks because changing their values can alter gain and filtering behavior. For a new design, verify the obsolete status and compare the AK4255ET electrical data with a currently supported amplifier before freezing the schematic.
推荐
Video Display Interface Retrofit
AK4255ET-based circuits can appear in legacy display-interface and analog video output retrofits where the established board uses a 16-pin TSSOP video amplifier. The device’s amplifier and low-pass-filter functions help condition the video signal before it reaches downstream display electronics. Its tape-and-reel format is compatible with automated component placement, although obsolete inventory must be handled with careful moisture and traceability controls. During a repair, inspect the exposed-pad and lead condition before installation, and compare the new component’s marking and package dimensions with the original. Use the manufacturer pin description to verify every connection rather than relying only on the physical 16-pin outline.
推荐
Surveillance Equipment Maintenance
The AK4255ET is relevant to maintenance of legacy surveillance equipment that uses a 16-pin TSSOP video-amplifier stage. A surveillance chain commonly routes camera video through conditioning circuitry before digitization or display, and preserving the original amplifier and filter network reduces the risk of changing channel gain or bandwidth. Engineers should record the original component orientation, inspect the reel packaging, and verify solder-joint quality during replacement. Because the AK4255ET is obsolete, inventory planning should account for limited rather than routine production availability. The Request a Quote form on this page can be used to request traceable material and a delivery plan for planned repair cycles.
推荐
Industrial Video Control Panels
Industrial video control equipment designed around the AK4255ET can use the amplifier in a compact analog signal-conditioning section between source and monitor circuitry. The 16-pin TSSOP package supports density, while the low-pass-filter section addresses unwanted high-frequency content in the video path. For a new industrial control panel, the obsolete lifecycle status is a significant qualification concern, so engineers should document whether the design is a repair, a second-source exercise, or a production release. A proposed substitute must match the 16-pin footprint, pin names, gain behavior, bandwidth, supply requirements, and external components. Retain the original schematic and datasheet throughout the qualification process.
推荐
Audio-Video Multimedia Modules
The AK4255ET can support legacy multimedia modules that combine analog video conditioning with audio processing. Its video-amplifier and filtering role is distinct from the codec functions performed by audio devices, but the two paths may share a regulated supply and grounding strategy. The AK4255ET’s 16-pin TSSOP package allows a compact placement alongside interface ICs, while reel packaging with 1,000 units per package suits automated production. Designers should keep high-current and switching paths separated from the video signal to minimize coupling into the low-level stage. Confirm the device’s supply, gain, and bandwidth from the manufacturer datasheet, and evaluate a currently supported video amplifier for new multimedia platforms.
推荐
推荐产品汇总
工程参考数据: AK4255ET ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Asahi Kasei Microdevices |
| Package | 16-pin TSSOP |
| Product Type | Video amplifier IC |
| Lifecycle Status | Obsolete |
| Shipping Configuration | Tape & Reel |
| Quantity per Package | 1,000 units |
| Moisture Sensitivity Level | MSL Level 1 |
| Filter Function | Low-pass filter |
关键差异点
- Obsolete lifecycle status is clearly identified for sourcing planning (对比 AK4255AET)
- Established 16-pin TSSOP physical format (对比 AK4255AET)
- Video amplification and low-pass filtering in one device (对比 THS7314DR)
设计说明
Do not select a replacement solely because it is also a 16-pin video amplifier. Verify the pin names, power rails, gain-control implementation, output topology, and external-component requirements against the AK4255ET manufacturer datasheet. A matching package can still create incorrect biasing, unusable filtering, or unstable operation if the functional blocks are assigned differently.
Preserve a continuous return path beneath and around the 16-pin TSSOP when repairing an existing board. Keep the video traces short, route them away from switching nodes and high-current supply paths, and place the manufacturer-recommended bypass capacitors close to their pins. These practices reduce susceptibility to coupling and help preserve the intended video-signal bandwidth.
Follow the manufacturer’s operating-temperature and electrical-limit tables when using obsolete inventory. For an engineering estimate, calculate junction rise as estimated power dissipation multiplied by the applicable package thermal resistance, then compare the resulting junction temperature with the device limit. Actual thermal performance also depends on copper area, airflow, board construction, and nearby heat sources.
Treat the tape-and-reel packaging as an assembly-control requirement, not merely a shipping format. Inspect leads for bending, oxidation, or shipping damage before placement, confirm the carrier orientation, and use an MSL-aware handling process. For MSL Level 1 material, the documented floor-life duration is Unlimited under the stated conditions, although production controls should still address mechanical damage and solderability.
合规信息
The distributor record identifies EAR99 export classification and MSL Level 1 handling. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the manufacturer product records and remain unknown.