AKM (Asahi Kasei Microdevices)

AK7740VT - 24-Bit Audio ADC/DAC with DSP | AKM

料号: AK7740VT ✗ 停产
最小起订量: 1 |

AK7740VT 概述

Asahi Kasei Microdevices AK7740VT is a special-purpose audio data-conversion IC integrating a 24-bit, 2-channel ADC, a 24-bit, 4-channel DAC, and audio digital signal processing. The AK7740VT is supplied in a tape-and-reel package for automated production assembly. Its combination of multichannel recording, playback, and digital audio processing makes it suitable for professional audio equipment, consumer audio systems, automotive infotainment, and communications products.

An audio ADC/DAC is a data-conversion IC that converts analog audio signals into digital data for processing, storage, or transmission, while the DAC section reconstructs digital audio into analog output signals. As a special-purpose codec with integrated audio DSP, the AK7740VT belongs to the hierarchy of audio converter, codec, signal-conversion IC, and semiconductor. This integration can reduce the number of external conversion and processing components required in a multichannel audio design.

The principal documented configuration consists of two 24-bit ADC channels and four 24-bit DAC channels. This asymmetric channel arrangement supports systems that capture fewer inputs than playback outputs, such as two-channel recording with multichannel monitoring or distributed audio routing. The manufacturer classification identifies the device as an audio DSP and special-purpose ADC/DAC, allowing digital filtering and signal-management functions to be integrated near the converter stages.

Because the AK7740VT is a high-resolution mixed-signal audio device, successful implementation depends on careful management of analog and digital power, grounding, clocking, and signal routing. The analog input and output paths should be kept physically separated from switching supplies and high-current digital return paths. Short, impedance-controlled routing and properly placed bypass capacitors help preserve converter performance and reduce susceptibility to crosstalk.

Typical applications include multichannel digital mixers, sound consoles, active loudspeaker crossover networks, automotive head-unit audio paths, home-theater processors, and interface modules that combine audio conversion with DSP. The same integrated architecture can also support USB or network-facing audio products when the surrounding digital interface and control system provide the required protocol handling.

Design planning should begin with the manufacturer datasheet pin description, electrical characteristics, application circuit, and recommended external components. Clock quality, supported audio rates, digital interface mode, analog full-scale range, supply requirements, and PCB layout recommendations must be confirmed before schematic capture. The datasheet application examples are the appropriate reference for decoupling, analog input filtering, DAC output reconstruction, and exposed-pad thermal treatment.

This product page combines the confirmed AK7740VT converter configuration with practical application guidance, sourcing workflows, and a strict verification checklist for replacement decisions. It helps engineers distinguish the AK7740VT from generic 24-bit converters by focusing on its integrated two-channel ADC, four-channel DAC, audio DSP, special-purpose converter classification, and tape-and-reel production format.

直接替换替代料: AK7740VT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

AK7740VT 最大额定值与电气特性

Product Type Special-purpose audio ADC/DAC with DSP
ADC Resolution 24 bit
ADC Channel Count 2 channels
DAC Resolution 24 bit
DAC Channel Count 4 channels
Integrated Processing Audio DSP
Manufacturer Category Data Acquisition - ADCs/DACs - Special Purpose
Packaging Type Tape & Reel (TR)
Production Status Mass-produced
RoHS 状态 Compliant

AK7740VT standard 引脚配置指南

AK7740VT(standard 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

AK7740VT 的 standard 封装引脚图

暂无详细引脚数据: AK7740VT.

请参阅 数据手册 以查看完整引脚配置。

典型应用

AK7740VT 适用于 6 应用s: Multichannel Digital Audio Mixer, Professional Audio Interface, Active Loudspeaker Crossover, Automotive Infotainment Audio, Home-Theater Audio Processor, Digital Recording and Playback Module.

🎧

Multichannel Digital Audio Mixer

The AK7740VT fits a digital mixer that must capture two stereo-source inputs and provide four analog playback outputs for monitor or zone-control channels. Its 24-bit ADC supports high-resolution capture, while the 24-bit, four-channel DAC consolidates multiple playback paths. The integrated audio DSP can assist with filtering and signal management close to the conversion stages. Place analog and digital sections in separate PCB regions, use short converter routing, and confirm clock, audio-rate, and digital-interface requirements in the manufacturer application circuit before finalizing the mixer architecture.

🎚️

Professional Audio Interface

The AK7740VT is suitable for a professional or project audio interface requiring two simultaneous analog recording channels and four balanced monitoring outputs. The ADC side captures left and right stereo input, while the four DAC outputs support main and auxiliary monitoring paths. Its integrated DSP can support signal conditioning within the conversion subsystem. The implementation should maintain controlled impedance around the analog pins, provide clean analog and digital supplies, and follow the datasheet reference layout to prevent converter crosstalk and clock-related noise.

🔊

Active Loudspeaker Crossover

An active crossover can use the AK7740VT for digital correction and multiband monitoring before separate power-amplifier stages. Two ADC channels accept the incoming stereo program, the audio DSP performs the configured processing, and four DAC channels provide independently managed outputs for multiple driver bands or test channels. The architecture reduces separate DSP-converter assemblies when the design already targets this integrated function. Validate channel mapping, gain structure, latency, and supported audio formats with the manufacturer DSP and application documentation.

🚗

Automotive Infotainment Audio

The AK7740VT can serve as the conversion and DSP center of an infotainment audio subsystem that receives two analog channels and drives four output channels. Its 24-bit conversion architecture fits digital head-unit signal chains requiring centralized audio routing. Automotive use requires separate confirmation of operating temperature, AEC-Q100 status, supply behavior, electromagnetic compatibility, and lifecycle risk. For production designs, use the manufacturer ordering information and qualification documents rather than assuming that the converter configuration alone establishes automotive readiness.

📺

Home-Theater Audio Processor

The AK7740VT is appropriate for a home-theater processor with two front or legacy analog inputs and four processed playback channels for surround, front-height, or subwoofer monitoring paths. The ADC converts the analog program into digital form, the embedded DSP performs configured audio functions, and the four DAC channels generate the processed outputs. Designers should define channel routing and latency before layout, provide low-noise supply rails, and isolate high-current amplifier outputs from the sensitive converter section to maintain signal integrity.

🖥️

Digital Recording and Playback Module

The AK7740VT can support a compact recording module with two analog capture channels and four analog playback outputs. Its integrated DSP enables local audio processing without requiring a separate general-purpose processor to handle every conversion and routing function. The device is most useful when the system architecture already supports the required digital audio format and clocks. Use the manufacturer reference circuit to select input filters, output reconstruction components, bypass capacitance, grounding topology, and digital isolation requirements before fabrication.

What is the AK7740VT?
The AK7740VT is a special-purpose audio data-conversion IC from Asahi Kasei Microdevices with an integrated audio DSP. According to the manufacturer product classification, it combines a 24-bit, 2-channel ADC with a 24-bit, 4-channel DAC. The mixed-signal device is intended for systems requiring several digital audio inputs and more numerous analog playback outputs.
How many ADC and DAC channels does the AK7740VT have?
The AK7740VT has two 24-bit ADC channels and four 24-bit DAC channels. This arrangement supports a system with more playback outputs than recording inputs, such as a two-input digital mixer or audio interface with four analog monitor outputs. The channel counts and 24-bit resolution are identified in the AK7740VT product classification.
Where can I download the AK7740VT datasheet PDF?
The AK7740VT datasheet is the primary document for its 48-page technical description and pin assignments. Use the AK7740VT datasheet link on this page to reach the document landing page, then select the manufacturer PDF. Confirm the electrical characteristics, clock requirements, interface mode, recommended application circuit, and package drawing before releasing a PCB design.
Where can I find the AK7740VT pinout?
The AK7740VT pinout is defined by the pin-description table and package drawing in the manufacturer datasheet. The AK7740VT search result identifies a 48-page document, but the public search excerpt does not expose individual pin names. Use the datasheet pin table when assigning analog inputs, DAC outputs, digital audio signals, clocks, supplies, and ground pins.
What are the main specifications engineers should know about AK7740VT?
The key confirmed AK7740VT specifications are a 24-bit ADC with two channels, a 24-bit DAC with four channels, integrated audio DSP, and tape-and-reel packaging. The device is classified as a special-purpose data-acquisition and data-conversion IC. Supply voltage, sample rate, analog signal range, clocking, operating temperature, and package dimensions require confirmation from the manufacturer datasheet.
Is the AK7740VT an audio codec?
The AK7740VT is best described as a special-purpose audio ADC/DAC with integrated DSP rather than a general-purpose communications codec. Its defining function is the conversion of two analog audio input channels into 24-bit digital data and four digital channels into 24-bit analog outputs. The integrated DSP adds audio processing between conversion and external digital interfaces.
Where can I buy the AK7740VT?
Use the Request a Quote form on this page to request the AK7740VT, current stock status, minimum order quantity, and lead time. Because the part is categorized as obsolete, procurement should include written confirmation of lifecycle status, available inventory, traceability, and whether any remaining material is original manufacturer stock. Do not assume that an obsolete label guarantees immediate availability.
What is the price of the AK7740VT?
The current AK7740VT price is determined by quantity, condition, availability, and traceability, so use the Request a Quote form on this page for a transaction-ready quotation. No quantity-break price is published in the product listings used for this page. For an obsolete component, request separate confirmation for new, unused, original-manufacturer material and for any previously installed or remarked units.
What is the lead time for the AK7740VT?
The current lead time for the AK7740VT must be confirmed through the Request a Quote form on this page. Because the device is categorized as obsolete, lead time depends on remaining factory inventory, lot traceability, and required shipment quantity. Include your required date and packaging preference in the request, and verify whether any allocation is reserved before placing a purchase order.
Is the AK7740VT in stock?
Stock status for the AK7740VT changes with remaining obsolete inventory and should be checked through the Request a Quote form on this page. A listing that identifies the part as in stock does not guarantee that a particular quantity is immediately shippable. Request the lot quantity, date code, manufacturing status, and inspection information with the quotation.
What is the best drop-in replacement for the AK7740VT?
No drop-in replacement for the AK7740VT is established by the available cross-reference information. A valid replacement would require the same package and pin assignment, matching 24-bit two-channel ADC and four-channel DAC functionality, compatible supply and clocking, and equivalent digital audio behavior. No substitute is listed without verified pin-level and parametric confirmation.
Can another codec replace the AK7740VT without PCB changes?
A different codec should not be treated as a direct replacement unless its package, pinout, electrical limits, clock architecture, and audio interface are verified as compatible. The available AK7740VT cross-reference results do not identify a confirmed drop-in equivalent. Treat any proposed substitute as a redesign candidate until its documentation demonstrates pin-to-pin compatibility.
When should I choose the AK7740VT over a generic 24-bit converter?
Choose the AK7740VT when the design specifically benefits from a 24-bit, two-channel ADC, a 24-bit, four-channel DAC, and integrated audio DSP in one special-purpose device. A generic converter may offer broader protocol flexibility, but it can require additional signal-processing circuitry. Confirm power, clock, sample-rate, interface, and package requirements before final selection.
Is the AK7740VT suitable for automotive audio systems?
The AK7740VT can support the functional needs of a multichannel automotive audio path, but automotive suitability cannot be established from its channel configuration alone. Review the manufacturer datasheet for operating temperature, AEC-Q100 qualification, supply range, and long-term availability. If those requirements are not confirmed, use an automotive-qualified audio converter for production vehicle designs.
What is the difference between AK7740VT and AK7740ET?
The AK7740VT and AK7740ET appear in the same 24-bit, two-channel ADC plus four-channel DAC product family, but the available excerpt does not define their temperature grades, packaging codes, qualification status, or orderable differences. Use the manufacturer ordering guide and datasheet to determine whether the suffix change affects qualification, temperature range, packing, or lifecycle status before treating either part as interchangeable.

工程参考数据: AK7740VT ——对比、设计指导和合规信息。

选型指南

Choose the AK7740VT when the product architecture specifically calls for two 24-bit analog recording channels, four 24-bit analog playback channels, and integrated audio DSP in a single special-purpose converter. This arrangement is particularly useful in digital mixers, monitoring interfaces, active speaker processors, and multichannel audio equipment where centralized conversion reduces external circuitry. Do not substitute a generic stereo codec unless its package, pinout, digital interface, clocking, and analog performance have been verified. A separate ADC or DAC family may be preferable when the design needs flexible channel counts, a different audio protocol, or a nonstandard supply arrangement. Because the AK7740VT is categorized as obsolete, production continuation should include lifecycle review, traceability checks, and manufacturer-quality sourcing. An engineering redesign is advisable when long-term availability, automotive qualification, or future product revisions outweigh the convenience of retaining the existing mixed-signal architecture.

与替代料对比

参数 本产品
Brand Asahi Kasei Microdevices
ADC Resolution 24 bit
ADC Channels 2 channels
DAC Resolution 24 bit
DAC Channels 4 channels
Integrated DSP Yes
Category ADCs/DACs - Special Purpose
Packaging Tape & Reel (TR)

关键差异点

  • Asymmetric multichannel converter configuration (对比 AK7740ET)
  • Integrated audio processing near the converters (对比 Generic standalone 24-bit ADC/DAC)
  • Special-purpose four-output playback architecture (对比 Stereo-only 24-bit converter)

设计说明

Separate the analog conversion region from digital signal processing and high-current switching stages. Route analog inputs and DAC outputs away from clocks, DSP interfaces, inductors, and power-supply return paths. Keep the analog and digital ground strategy consistent with the manufacturer reference layout, and avoid routing return currents beneath sensitive converter inputs. These practices reduce coupling between the two-channel ADC, four-channel DAC, and on-chip DSP.

Use the exact analog and digital supply values, tolerance, sequencing, and bypass requirements listed in the AK7740VT manufacturer datasheet. Place the prescribed input and output capacitors close to their associated pins with short ground returns. Do not substitute capacitor values without checking stability, effective DC bias, and the voltage-class requirements of the selected components.

Treat clock and digital audio nets as high-speed signals even when the payload rate appears modest. Use continuous reference-plane return paths, avoid unnecessary vias, and keep clock routing away from analog inputs and outputs. Confirm clock amplitude, jitter tolerance, operating modes, supported sample rates, and interface timing from the datasheet before defining external clock-generation circuitry.

Do not assume that another 24-bit audio converter is interchangeable. The AK7740VT combines two ADC channels, four DAC channels, DSP resources, a specific package, and particular electrical and timing requirements. Validate every replacement against the pin description, package drawing, power architecture, clock scheme, digital interface, and analog performance. For an obsolete device, also verify lot traceability, storage history, and refurbishment status.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

RoHS compliance is identified in the AK7740VT product listing. No additional compliance or automotive-qualification claims are made without manufacturer documentation.

数据核验日期: 2026-11-11 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

AK7740VT datasheet AK7740VT pinout AK7740VT datasheet pdf AK7740VT specifications AK7740VT equivalent AK7740VT replacement AK7740VT cross reference AK7740VT application circuit AK7740VT audio ADC DAC AK7740VT price AK7740VT stock AK7740VT lead time Asahi Kasei AK7740VT AK7740VT 24 bit 2 channel ADC AK7740VT 24 bit 4 channel DAC

相关元器件 & 术语

Asahi Kasei Microdevices AK7740VT AK7740ET 24-bit ADC 24-bit DAC 2-channel ADC 4-channel DAC audio DSP special-purpose ADC/DAC audio converter audio codec mixed-signal IC semiconductor tape and reel digital audio interface analog-to-digital conversion digital-to-analog conversion RoHS AEC-Q100 AK5522VN AK7755EN AK5383VS AK4495EQ AK4490EN
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情