APA300-BGG456 300K Gate ProASICPlus FPGA | Microchip
料号: APA300-BGG456 ✓ 量产中APA300-BGG456 概述
A field-programmable gate array is a programmable logic device within the semiconductor and integrated-circuit hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic, memory, programmable interconnect, and I/O in one device. The ProASICPlus family combines reprogrammability with nonvolatile Flash-based configuration, making it suitable for designs that require logic density, field updates, and deterministic embedded control without using a mask change.
The APA300 device provides 300,000 system gates, 73,728 bits of block RAM, and up to 290 user I/O. Its high-speed interconnect supports local and long-line networks, while its global network is designed for low-skew clock distribution. The device also incorporates Schmitt-trigger input behavior and features associated with high routability and utilization. These characteristics are useful when the design combines control logic, data acquisition, protocol handling, and external memory interfaces.
The APA300-BGG456 is identified with a 456-pin BGA package and a 1.27 mm ball pitch. Dense BGA construction supports a large I/O count but requires careful PCB escape routing, via-in-pad or fanout design, and assembly-process control. Because the device is programmed after fabrication, the same board hardware can support multiple logic configurations when product requirements evolve or field updates are needed.
Typical uses include industrial automation, communication equipment, instrumentation, embedded control, and high-density peripheral logic. The available gate count and RAM are well suited to consolidating multiple fixed-function blocks around a single programmable device. Designers should also evaluate clocking, I/O standards, power planning, and the thermal requirements of the selected BGA implementation before release to manufacturing.
The primary design consideration is the combination of programmable logic and a large BGA footprint. Plan power and ground distribution for simultaneous switching activity, keep sensitive interfaces away from high-current return paths, and validate every BGA escape route against the assembly capability of the PCB manufacturer. This page also organizes package, capacity, replacement, and sourcing information for faster engineering evaluation.
This product overview connects the APA300-BGG456 specifications with same-package alternatives, application guidance, and PCB-focused design notes. It is intended to support initial device selection, replacement planning, and hardware qualification without replacing the complete Microchip pinout, timing, configuration, and electrical documentation.
直接替换替代料: APA300-BGG456 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: APA300-BGG456 (相同外形与封装尺寸) ——差异在于 Block RAM, Package.
APA300-BG456
✅ 直接替换联系询价
查看数据手册 →APA300-BGG456I
✅ 直接替换📋 参考替代料(不在目录中)
APA300-BGG456M
✅ 直接替换📋 参考替代料(不在目录中)
APA300-BGG456C
✅ 直接替换📋 参考替代料(不在目录中)
APA300-FBGG456
✅ 直接替换📋 参考替代料(不在目录中)
APA300-BGG456 最大额定值与电气特性
| Product Type | ProASICPlus Field-Programmable Gate Array |
| System Gates | 300,000 gates |
| Block RAM | 73,728 bits |
| Number of I/O | 290 I/O |
| Total Package Pins | 456 pins |
| 封装 | BGG456 plastic BGA |
| Package Ball Pitch | 1.27 mm |
| Nominal Supply Voltage | 2.5 V |
| 工作电源电压 | 2.3 V to 2.7 V |
| Logic Family | CMOS |
| 工作温度 | -55 °C to 125 °C |
| 安装类型 | Surface mount |
| Configuration Technology | Nonvolatile Flash technology |
| I/O Type | Schmitt-trigger input |
| Interconnect | Local network, long-line network, and global network |
| Global Network Skew | Low-skew global network |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | unknown |
APA300-BGG456 1.27 mm 引脚配置指南
APA300-BGG456(1.27 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: APA300-BGG456.
请参阅 数据手册 以查看完整引脚配置。
典型应用
APA300-BGG456 适用于 6 应用s: Industrial Automation and Control, Communication Equipment, Precision Instrumentation, Embedded Data Acquisition, Programmable Peripheral Logic, Aerospace and Defense Test Equipment.
Industrial Automation and Control
The APA300-BGG456 fits industrial automation controllers that need substantial programmable logic beside field-programmable I/O. Its 300,000 system gates and 73,728 bits of block RAM allow sequencing, interlocks, diagnostics, data transformation, and communication-interface logic to be consolidated without relying on several fixed-function devices. The 290-I/O count also supports digital sensors, actuator interfaces, field buses, and machine-status signals. Using nonvolatile Flash configuration allows controlled logic updates in deployed equipment. The principal engineering constraint is the 456-ball BGA: the PCB must provide reliable escape routing, adequate power and ground distribution, and an assembly process capable of handling its 1.27 mm ball pitch.
推荐
Communication Equipment
APA300-BGG456 is appropriate for communication equipment requiring configurable framing, packet handling, buffering, and supervisory logic. The device provides 300,000 system gates, 73,728 bits of block RAM, and 290 I/O, creating enough capacity for parallel interfaces, line-card control, status aggregation, and protocol state machines. Its Flash-based nonvolatile configuration supports field updates when protocols or customer configurations change. The 2.3 V to 2.7 V operating supply range places it in the device's specified CMOS operating region. Designers should balance the high I/O count against BGA escape complexity and carefully partition clock, data, and power planes to prevent high-speed routing from degrading signal integrity.
推荐
Precision Instrumentation
The APA300-BGG456 can serve as the programmable control and acquisition fabric in precision instrumentation where fixed sequencing must be adaptable. Its 300,000 gates support measurement orchestration, calibration tables, trigger logic, digital filtering, and instrument communication, while 73,728 bits of block RAM provide on-chip storage for status and buffering. With 290 I/O, the device can interface multiple converters, sensors, displays, and calibration interfaces without an excessive external multiplexing hierarchy. The BGG456 package demands disciplined analog and digital partitioning: sensitive measurement signals should remain away from switching power paths, and high-current outputs should use independent return paths. Nonvolatile configuration also simplifies field updates while preserving the original device interface.
推荐
Embedded Data Acquisition
APA300-BGG456 is suitable for embedded data-acquisition systems that combine parallel sensor inputs, digital filtering, local memory, and control functions. Its 290 I/O provide substantial connectivity for multiplexed converters, counters, capture signals, and external memory, while 73,728 bits of block RAM can support buffering and working storage. The 300,000-gate architecture gives designers room to implement protocol conversion, trigger management, and supervisory logic alongside acquisition functions. Because the operating supply range is 2.3 V to 2.7 V, system power planning must ensure that transients remain inside the device limits. The 456-ball package also requires a deliberate escape strategy, with simulation performed before committing all 456 connections to high-density routing.
推荐
Programmable Peripheral Logic
The APA300-BGG456 can consolidate programmable peripheral functions in systems that need extensive bus arbitration, data formatting, storage, or timing control. Its 300,000 system gates and 290 I/O allow multiple peripheral blocks to share a single FPGA implementation, while the 73,728 bits of block RAM accommodate buffering and state management. Nonvolatile Flash configuration is valuable in products that undergo periodic feature updates because the configuration remains programmable without a mask revision. The trade-off is board density: a 456-ball BGA requires more escape routing, layer transitions, and assembly care than a smaller APA300 package. Pin assignment and power-domain planning should therefore begin during architecture design, not after schematic completion.
推荐
Aerospace and Defense Test Equipment
APA300-BGG456 can be evaluated for configurable test and interface systems where logic requirements evolve across platforms. Its 300,000 gates and 73,728 bits of block RAM support sequencers, stimulus generation, result capture, and communication, while 290 I/O provide broad connectivity to fixtures and instruments. Flash-based nonvolatile configuration enables field reprogramming, which is useful when test procedures change. Qualification requirements must be handled separately: the available technical information does not establish AEC-Q100 qualification for the exact ordering code, so an aerospace or defense design requires a documented supplier assessment and environmental verification. Thermal design and BGA inspection criteria should also be aligned with the intended mission profile.
推荐
推荐产品汇总
工程参考数据: APA300-BGG456 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | APA300-BG456 | APA300-BGG456I | APA300-BGG456M | APA300-BGG456C | APA300-FBGG456 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | BGG456 | BG456 | BGG456 | BGG456 | BGG456 | PBGA456 |
| System Gates | 300,000 gates | 300,000 gates | 300,000 gates | 300,000 gates | 300,000 gates | 300,000 gates |
关键差异点
- Combines 300,000 gates with 290 I/O in a single 456-ball BGA (对比 APA300-FGG256)
- Provides nonvolatile Flash-based field programmability (对比 APA300-BG456)
- Offers a broader listed temperature range than the industrial suffix (对比 APA300-BGG456I)
设计说明
Plan the APA300-BGG456 escape routing before finalizing the PCB stack-up. The package contains 456 balls on a 1.27 mm pitch, so inner-layer breakout, via geometry, solder-mask design, and component placement can determine whether the board can be assembled reliably. Work from Microchip's controlled BGG456 package drawing, identify power and ground balls first, and reserve unobstructed fanout paths for configuration, clock, and high-speed interface signals.
Distribute the 2.3 V to 2.7 V operating supply across multiple power and ground connections according to the package and device guidance. Estimated consideration: at a 2.5 V nominal rail, every 10 mA of average device current corresponds to 25 mW of supply-side power; actual dissipation also depends on internal activity. Keep switching supply paths separate from sensitive programmable-logic rails, use local bulk and high-frequency decoupling at each designated supply ball, and verify the complete network under worst-case switching conditions.
Reserve short, continuous clock routing for the device's global network and avoid routing high-speed signals beneath noisy power or switching-output regions. The APA300 family includes low-skew global and high-speed local or long-line interconnect, but package escapes can still introduce skew or reflections. Match interface impedances, use the shortest practical escape routes, and simulate length mismatches and terminations before releasing high-speed nets to production.
Do not treat equal gate counts as proof that two APA300 order codes are interchangeable. Check the full ordering code, speed grade, temperature grade, package drawing, ball map, configuration interface, and power requirements. In particular, BG456, BGG456, BGG456I, BGG456M, BGG456C, and FBGG456 may share a 456-ball class while carrying different suffix-specific requirements. Record the approved part number in the schematic, BOM, and assembly documentation.
合规信息
The product-specific technical information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These attributes require confirmation from Microchip's controlled product documentation or a supplier declaration for the exact ordering code.