APA300-PQG208 - 300K Gate ProASICPlus FPGA | Microchip
料号: APA300-PQG208 ✓ 量产中APA300-PQG208 概述
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic functions are configured through programmable interconnect and logic resources. An FPGA belongs to the broader categories of programmable logic, integrated circuit, digital semiconductor, and semiconductor. The ProASICPLUS family combines ASIC-like density and design methods with field programmability, making it useful where product variants, firmware updates, and design revisions must be accommodated without changing the printed circuit board.
The APA300-PQG208 provides 300,000 system gates, 158 I/O, and 8,192 logic cells. According to the Microchip APA300 family information, ProASICPLUS devices are reprogrammable, nonvolatile, and live at power-up. The listed operating-temperature range is -55°C to +125°C, while the family's CMOS implementation and dedicated high-speed network resources support communications, control, embedded processing, and general-purpose logic designs.
The 208-pin BFQFP package provides 158 user I/O and uses a 0.5 mm terminal pitch according to the published comparison material. This package offers a practical migration path among APA300 ordering codes that retain the same 208-pin footprint. Because the device stores its configuration in nonvolatile flash, the programmed logic becomes available without requiring a separate configuration PROM or an external configuration load sequence.
Typical applications include industrial control equipment, communications infrastructure, instrumentation, test and measurement systems, embedded avionics, and automotive electronic modules. The 300K-gate resource level is suitable for designs that exceed small programmable-logic capacity while avoiding the cost and design effort of a full custom ASIC. The broad specified temperature range also supports harsh industrial and aerospace environments when the complete board-level design satisfies its thermal requirements.
The primary engineering consideration is package-level equivalence. A replacement must use the same 208-pin BFQFP footprint, maintain compatible voltage and interface requirements, and provide sufficient FPGA resources for the original bitstream. Temperature-grade and ordering-code differences should be checked against the original qualification requirements before design release. The manufacturer datasheet and pin-assignment table should govern PCB escape routing, bank assignments, configuration pins, and power distribution.
This product summary consolidates the device identity, package constraints, technical search terms, family-level alternatives, and practical replacement checks into one engineering reference. It highlights the nonvolatile flash architecture and live-at-power-up behavior that distinguish ProASICPLUS devices from SRAM-based FPGAs while preserving an explicit separation between confirmed device facts and parameters requiring design review.
直接替换替代料: APA300-PQG208 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
APA300-PQG208M
✅ 直接替换📋 参考替代料(不在目录中)
APA300-PQ208M
✅ 直接替换📋 参考替代料(不在目录中)
APA300-PQ208I
✅ 直接替换📋 参考替代料(不在目录中)
APA300-PQG208A
✅ 直接替换📋 参考替代料(不在目录中)
APA300-PQG208B
✅ 直接替换📋 参考替代料(不在目录中)
APA300-PQG208 最大额定值与电气特性
| Device Type | ProASICPlus flash FPGA |
| System Gates | 300,000 gates |
| Logic Cells | 8,192 cells |
| Maximum I/O Count | 158 I/O |
| Package Pin Count | 208 pins |
| Package Type | 208-BFQFP |
| Terminal Pitch | 0.5 mm |
| Logic Technology | CMOS |
| 电源电压 | 2.5 V |
| Device Speed Class | 180 MHz class |
| 工作温度 | -55°C to +125°C |
| Configuration Memory | Nonvolatile flash |
| Power-Up Behavior | Live at power-up |
| Reprogrammability | Reprogrammable |
| RoHS 状态 | Compliant |
| 安装类型 | Surface mount |
APA300-PQG208 208-bfqfp 引脚配置指南
APA300-PQG208(208-bfqfp 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: APA300-PQG208.
请参阅 数据手册 以查看完整引脚配置。
典型应用
APA300-PQG208 适用于 6 应用s: Industrial Control Systems, Communications Infrastructure, Test and Measurement Equipment, Aerospace and Defense Electronics, Automotive Electronic Modules, Embedded Instrumentation Gateways.
Industrial Control Systems
The APA300-PQG208 fits industrial controllers that need substantial combinational and sequential logic without the overhead of a custom ASIC. Its 300,000 system gates and 8,192 logic cells can consolidate interface translation, machine-state logic, timers, counters, and supervisory functions, while 158 I/O provide connections to sensors, actuators, and field buses. Nonvolatile flash allows operating firmware or logic configurations to be revised during production and field maintenance, and live-at-power-up behavior supports deterministic controller startup. The 208-pin BFQFP package is suitable for leaded surface-mount assembly on industrial control boards.
推荐
Communications Infrastructure
APA300-PQG208 is suitable for protocol handling, packet routing, channel control, and other communications logic that benefits from programmable nonvolatile configuration. The 300,000-gate resource level supports parallel datapaths and state machines, while the family documentation identifies dedicated local and long-line networking resources. Its 180 MHz-class positioning permits moderately clocked control logic, and live-at-power-up operation allows the communications system to become operational without a separate external configuration device. Board designers should allocate I/O banks according to voltage requirements and preserve the manufacturer's recommended configuration and power connections.
推荐
Test and Measurement Equipment
The APA300-PQG208 can implement acquisition sequencing, timing control, trigger logic, calibration tables, and instrument communication in a compact instrument architecture. Its 300,000 system gates provide enough capacity to consolidate several programmable-logic functions, while 158 I/O can support parallel data paths, status indicators, and control peripherals. Nonvolatile flash is especially useful for retaining calibration or personality configurations across power cycles, and live-at-power-up behavior simplifies deterministic startup sequencing. Engineers should use the manufacturer's pin and I/O-bank tables to preserve analog, clock, and isolation boundaries.
推荐
Aerospace and Defense Electronics
APA300-PQG208 is applicable to aerospace and defense electronics designs requiring programmable logic, a broad temperature specification, and field-updateable configuration. The listed -55°C to +125°C operating range supports harsh ambient environments, while flash-based configuration eliminates a one-time external PROM requirement. Potential functions include telemetry framing, redundant command decoding, fault logging, sensor fusion control, and avionics bus arbitration. Actual deployment requires system-level qualification because the device's published temperature rating does not by itself establish radiation tolerance, vibration resistance, or a complete aerospace certification.
推荐
Automotive Electronic Modules
The APA300-PQG208 can support body, chassis, or industrial vehicle modules requiring deterministic startup, extensive I/O, and updateable logic. Its 300,000 system gates are suitable for sensor aggregation, actuator sequencing, diagnostic logic, and communication gateways, while 158 I/O allow flexible external connectivity. The nonvolatile flash configuration supports configuration retention and controlled field updates, and the stated -55°C to +125°C range covers many demanding ambient conditions. Production use still requires automotive qualification of the exact ordering code and a complete assessment of transient, electromagnetic, and functional-safety requirements.
推荐
Embedded Instrumentation Gateways
APA300-PQG208 fits gateways that translate between sensors, field buses, and host processors while also performing local protocol conversion. The 300,000-gate capacity can host multiple interface state machines and data-format converters, and the 158 available I/O support concurrent external connections. Flash configuration permits personalization by serial number or customer configuration without replacing the device, while live-at-power-up behavior supports controlled network recovery after restoration of power. Board-level planning should separate high-speed and low-speed domains, assign voltage-compatible banks, and provide clean clock distribution to maintain reliable timing.
推荐
推荐产品汇总
工程参考数据: APA300-PQG208 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | APA300-PQG208M | APA300-PQ208M | APA300-PQ208I | APA300-PQG208A | APA300-PQG208B |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 208-BFQFP | 208-BFQFP | 208-BFQFP | 208-BFQFP | 208-BFQFP | 208-BFQFP |
| System Gates | 300,000 gates | 300,000 gates | 300,000 gates | 300,000 gates | 300,000 gates | 300,000 gates |
| Configuration Technology | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash |
关键差异点
- Identified APA300 ordering options retain the 208-pin BFQFP footprint (对比 APA300-PQG208M)
- Direct family matching supports minimal PCB migration (对比 APA300-PQ208I)
- Nonvolatile configuration supports field-updateable logic (对比 APA300-PQG208A)
设计说明
Follow the manufacturer power-distribution and decoupling recommendations for the APA300-PQG208. The device operates from a 2.5 V supply, so isolate its core and I/O requirements into the appropriate rails and account for configuration-pin states during startup. Place the required bulk and high-frequency decoupling capacitors close to their associated power terminals, minimize supply-loop area, and test the board across the full input-voltage and temperature range before releasing the layout.
Treat all 208 terminals as a complete pin-to-pin constraint when evaluating an APA300 replacement. Match package drawing, terminal pitch, exposed or non-exposed thermal arrangement, pin-one orientation, and every power or ground assignment from the manufacturer pin table. Do not infer equivalence from the 208-pin count alone. A candidate that retains the 208-BFQFP outline but changes ground, configuration, or I/O-bank assignments can still require component, routing, or bitstream changes.
Assign I/O banks according to the board's voltage domains and preserve the required configuration pins at their documented levels. Keep clocks and high-speed routing away from noisy switching nodes, maintain continuous return paths beneath high-speed signals, and follow the manufacturer's guidance for unused terminals. Because APA300-PQG208 is live at power-up, review reset, configuration, and clock behavior together; otherwise, an apparently correct board may fail during startup rather than during normal operation.
Do not approve a substitute solely because it ends with a similar APA300 ordering code. Compare the complete ordering guide for speed grade, temperature grade, package, programming status, qualification, and lifecycle. Also confirm that the proposed configuration uses the same voltage standards, clock limits, I/O-bank rules, and programming flow. Re-run timing analysis and power estimation after any device substitution because a 100% structural match does not establish identical timing margins.
合规信息
The APA300-PQG208 comparison listing identifies the device as RoHS compliant. No specific REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement is identified for the exact ordering code.