AT91SAM9R64-CU - 240MHz ARM9 MPU | Microchip Technology
料号: AT91SAM9R64-CU ✗ 停产AT91SAM9R64-CU 概述
An ARM microprocessor is a system-level processing component that executes an operating system or embedded control application while coordinating memory and peripheral interfaces. The AT91SAM9R64 belongs to the SAM9R product family, combining an ARM926EJ-S processor core with integrated system memory and communication resources. In the device hierarchy, it is an embedded microprocessor rather than a small microcontroller, making it suitable for systems that require substantially more software capacity than a conventional 8-bit or 16-bit control device.
The AT91SAM9R64-CU operates at 240 MHz and includes 32 KB of ROM for program storage. Its 72K x 8 RAM organization provides 72 Kbytes of internal SRAM, while the manufacturer documentation describes 64 Kbytes of high-speed SRAM divided into four 16-Kbyte blocks. These memories support boot code, operating-system data, graphical or communication buffers, and other working memory without requiring an immediate external memory device.
Communication integration supports connected embedded systems. The product family provides interfaces including USB device, SDIO/SD/MMC, AC97, USART, SPI, I2S, and I2C connectivity, as well as an external bus interface. These interfaces allow the processor to operate as the central controller for human-machine interfaces, storage, audio, industrial communications, and networked peripherals while preserving a compact system design.
Typical uses include industrial automation equipment, automotive electronic systems, consumer electronics, human-machine interfaces, data acquisition controllers, and embedded gateways. The 144-ball grid array offers a high pin count for external memory and parallel-interface connectivity, while its 13 x 13 mm body supports compact board layouts. The -40°C to 85°C industrial range makes the component suitable for temperature-controlled equipment rather than only consumer-room-temperature products.
Designers should verify the complete pin assignment and power requirements against the manufacturer datasheet before PCB release. A 1.65 V to 3.6 V core range requires careful sequencing of supply rails and suitable decoupling. Because this is a fine-pitch BGA package, assembly process control, solder-paste volume, thermal profiles, and via-in-pad or fanout choices can materially affect yield and long-term reliability.
This page consolidates manufacturer specifications, package and lifecycle information, sourcing guidance, application context, and engineering considerations into one technical reference. It also separates a confirmed drop-in replacement from broader functional alternatives, helping design teams distinguish PCB compatibility from general feature similarity before committing to a substitution.
直接替换替代料: AT91SAM9R64-CU ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料AT91SAM9R64-CU 最大额定值与电气特性
| Product Type | 16/32-bit ARM microprocessor |
| Processor Core | ARM926EJ-S |
| 最大时钟频率 | 240 MHz |
| Architecture | ARM9, 32-bit |
| Program Memory | 32 KB ROM |
| RAM | 72K x 8 bits (72 Kbytes) |
| High-Speed SRAM | 64 KB in four 16-Kbyte blocks |
| Supply Voltage Range | 1.65 V to 3.6 V |
| Operating Ambient Temperature | -40°C to +85°C |
| Temperature Grade | Industrial |
| 封装 | 144-BGA (13 x 13 mm) |
| Terminal Count | 144 balls |
| 安装类型 | Surface mount |
| Package Body Size | 13 x 13 mm |
| Integrated Interfaces | USB device, SDIO/SD/MMC, AC97, USART, SPI, I2S, and I2C |
| External Bus Interface | Available |
| Packaging Type | Tray |
AT91SAM9R64-CU 13 x 13 mm 引脚配置指南
AT91SAM9R64-CU(13 x 13 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: AT91SAM9R64-CU.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AT91SAM9R64-CU 适用于 6 应用s: Industrial Automation Controller, Human-Machine Interface, Embedded Data Acquisition System, Automotive Embedded Control Unit, Networked Embedded Gateway, Consumer Electronics and Audio Control.
Industrial Automation Controller
The AT91SAM9R64-CU fits industrial automation controllers that need a 240 MHz ARM926EJ-S processor while retaining a compact 13 x 13 mm package. Its 72 Kbytes of RAM support operating-system work areas, diagnostics, and communication buffers, while USB, serial, and external-bus interfaces connect sensors, drives, and operator panels. The -40°C to 85°C industrial range is appropriate for controlled factory environments, although motor-drive protection and safety functions should remain outside the processor.
推荐
Human-Machine Interface
The AT91SAM9R64-CU can serve as the central processor in a graphical human-machine interface that coordinates external memory, display control, USB peripherals, and serial equipment. Its 240 MHz operating rate provides substantial instruction throughput for an embedded GUI and protocol stack, while 32 KB of ROM and 72 Kbytes of RAM provide local resources. The 144-BGA footprint also exposes enough connections for external bus, storage, and communication peripherals, subject to the complete pin-assignment review.
推荐
Embedded Data Acquisition System
The AT91SAM9R64-CU is suitable for a data-acquisition system that must combine sensor conditioning outputs with local processing and communications. Its high-speed SRAM supports buffering data received through external-bus or serial devices, and the USB device, USART, SPI, I2C, and I2S interfaces cover common acquisition paths. At 240 MHz, it can run protocol handling and control code locally while the 1.65 V to 3.6 V supply range integrates with low-voltage system rails.
推荐
Automotive Embedded Control Unit
The AT91SAM9R64-CU's 240 MHz ARM926EJ-S core, industrial temperature range, and extensive external connectivity support legacy automotive control, gateway, and infotainment-adjacent modules. USB, SDIO/SD/MMC, USART, SPI, I2C, and I2S provide paths to storage, sensors, audio, and service interfaces. Because the product's lifetime status is obsolete, a production automotive program should require traceability, change-control review, and qualification against the exact vehicle specification.
推荐
Networked Embedded Gateway
The AT91SAM9R64-CU can form the processing core of an embedded gateway that links serial equipment, storage, and USB peripherals to a higher-level network. The 240 MHz ARM9 core can execute protocol stacks, the 72 Kbytes of RAM can hold active buffers, and the integrated communication interfaces reduce component count. The product's USB device capability and external bus are particularly useful for local service ports and system integration, provided the host-side protocol stack is validated for the legacy processor.
推荐
Consumer Electronics and Audio Control
The AT91SAM9R64-CU can control connected consumer or audio products requiring more processing capability than a conventional microcontroller. Its AC97 and I2S interfaces support digital audio pathways, while USB, SDIO/SD/MMC, USART, SPI, and I2C cover storage and peripheral connectivity. The 240 MHz ARM926EJ-S core and 72 Kbytes of RAM support application logic, but designers must assess long-term lifecycle support and secure supply before using this legacy-status device in a new consumer launch.
推荐
推荐产品汇总
工程参考数据: AT91SAM9R64-CU ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 144-BGA (13 x 13 mm) |
| Brand | Microchip Technology |
| Product Type | 16/32-bit ARM9 microprocessor |
| Processor Core | ARM926EJ-S |
| Maximum Clock Frequency | 240 MHz |
| Program Memory | 32 KB ROM |
| RAM | 72K x 8 bits |
| Supply Voltage Range | 1.65 V to 3.6 V |
| Operating Ambient Temperature | -40°C to +85°C |
| Lifecycle Status | Obsolete |
关键差异点
- Higher stated clock frequency than the manufacturer-recommended substitute family (对比 SAM9X60)
- Smaller specified BGA body than the related RL64 device (对比 AT91SAM9RL64-CU)
- Documented industrial ambient-temperature range (对比 SAM9X60)
设计说明
Do not treat the SAM9X60 recommendation as proof of a drop-in replacement. The manufacturer identifies it as a substitute device, but it operates at 190 MHz versus 240 MHz for AT91SAM9R64-CU. Review package dimensions, ball assignment, memory map, boot behavior, peripheral implementation, and software drivers before reusing an existing board. AT91SAM9RL64-CU also requires review because its listed 217-LFBGA package differs from the target's 144-BGA package.
Design the supply network around the documented 1.65 V to 3.6 V operating range, but do not infer individual rail tolerances or startup sequencing from that range alone. Use the complete electrical-characteristics table to define each supply, its permitted rise time, and any dependency between rails. Place bulk and high-frequency decoupling close to the relevant BGA power and ground balls, and verify the resulting rail ripple against processor and interface timing requirements.
Plan the 144-ball BGA layout with manufacturing capability in mind, including an appropriate ball-pitch design rule, pad and solder-mask geometry, paste volume, and via strategy. External memory and bus signals require continuous return paths, short escape routes, and controlled impedance where applicable. Because no complete ball-level signal assignment is reproduced on this page, engineers should use the manufacturer package drawing and pin-description tables for every power, ground, clock, reset, and high-speed connection.
Estimate total board and junction heating from processor activity, supply rails, external memory, and attached peripherals rather than from processor clock speed alone. The processor's 13 x 13 mm BGA can couple heat into the PCB, so provide a continuous thermal path with vias into inner copper layers and a defined copper area around the device. Confirm the assembly's maximum ambient temperature against the -40°C to 85°C device rating and account for enclosure temperature rise.
The product's obsolete lifecycle status creates procurement and counterfeit-mitigation risk. Require traceability, manufacturer or authorized-channel documentation, date-code information, and a condition statement for every production allocation. Freeze the approved configuration and inspect incoming devices against electrical, marking, and solderability requirements. A listing that names the correct MPN alone is not sufficient evidence of production suitability.
合规信息
The product is identified as industrial grade and specified for -40°C to 85°C operation. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not established from the cited device information.