ATF22V10C-15PI - 15 ns 10-Macrocell EEPLD | Microchip
料号: ATF22V10C-15PI ✓ 量产中ATF22V10C-15PI 概述
An electrically erasable programmable logic device, or EEPLD, is a semiconductor that implements fixed digital logic through a user-programmed configuration. In the product hierarchy, an EEPLD is a programmable logic device, a digital integrated circuit, and a semiconductor. The ATF22V10C architecture combines macrocell-based logic implementation with nonvolatile Flash configuration memory, making it useful where a board requires flexible control logic, decoding, address translation, state-machine implementation, or replacement of several conventional gate arrays.
The ATF22V10C-15PI provides a 15 ns speed grade and 10 macrocells. The manufacturer describes the broader ATF22V10C family as supporting speeds down to 5 ns and typical standby power dissipation as low as 10 microamperes. Its architecture uses proven electrically erasable Flash memory technology, while the 22V10 design is compatible with the established GAL22V10 fusemap and pin arrangement according to Microchip's replacement guidance.
The ATF22V10C family is specified for a nominal 5 V supply, with industrial-temperature speed grades specified over 5 V ±5% and military-temperature speed grades over 5 V ±10%. The -15PI designation identifies a 15 ns industrial-temperature grade supplied in a PDIP package. This combination is intended for legacy and industrial control systems where through-hole construction, nonvolatile configuration, and deterministic logic timing are important.
Typical uses include industrial automation, telecommunications infrastructure, embedded control, peripheral decoding, and compact state-machine logic. In these systems, the device can consolidate Boolean equations and registered functions that would otherwise require multiple standard logic packages. The 24-pin PDIP format also supports repairable and manually assembled industrial equipment where through-hole sockets or leaded packages remain practical.
For PCB design, place the 24-pin PDIP according to the manufacturer's pin-description table and preserve the standard GAL22V10-compatible footprint and programming interface. Confirm the required supply voltage, operating temperature, output timing, and unused-pin states in the datasheet before production release. For a new design, also evaluate a smaller surface-mount PLD or an FPGA when board area, modern tooling, or higher logic density is more important than the 22V10's established leaded-package footprint.
This product page combines the manufacturer's ATF22V10C architecture information with package, timing, macrocell, and cross-reference details, then adds practical selection guidance for engineers maintaining GAL22V10-based and ATF22V10C-based equipment.
直接替换替代料: ATF22V10C-15PI ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ATF22V10C-15PI (相同外形与封装尺寸) ——差异在于 AEC-Q100 Qualification, Configuration Memory, Device Type, Package.
ATF22V10C-15PU
✅ 直接替换📋 参考替代料(不在目录中)
ATF22V10C-15PI 最大额定值与电气特性
| Device Type | High-performance CMOS electrically erasable programmable logic device |
| Architecture | 22V10 |
| Macrocells | 10 macrocells |
| I/O Pins | 24 I/O pins |
| Propagation Delay | 15 ns |
| Configuration Memory | Electrically erasable Flash memory |
| 电源电压 | 5 V nominal |
| Industrial Speed-Grade Supply Range | 4.75 V to 5.25 V (5 V ±5%) |
| Typical Standby Power Dissipation | 10 µA typical |
| 封装 | 24-pin PDIP |
| Package Width | 0.300 in (7.62 mm) |
| 安装类型 | Through-hole |
| Temperature Grade | Industrial |
| Logic Compatibility | GAL22V10 pin-to-pin and JEDEC fusemap compatible |
| Programmability | Electrically erasable, nonvolatile configuration |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_applicable |
ATF22V10C-15PI 0.300 in (7.62 mm) 引脚配置指南
ATF22V10C-15PI(0.300 in (7.62 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: ATF22V10C-15PI.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATF22V10C-15PI 适用于 6 应用s: Industrial Automation Control Logic, GAL22V10 Board Replacement, Peripheral Address Decoding, Telecommunications Interface Logic, Embedded State Machine, Legacy Equipment Repair and Retrofit.
Industrial Automation Control Logic
The ATF22V10C-15PI fits compact industrial control boards that require deterministic combinational and registered logic without the overhead of a general-purpose processor. Its 10 macrocells can consolidate decoding, sequencing, interlock logic, and signal conditioning functions, while the 15 ns propagation-delay grade provides a defined timing target. The 24-pin PDIP format is useful in repair-oriented or manually assembled equipment where replacing a leaded device is simpler than changing the board footprint. The industrial-grade suffix should be selected only when the equipment's documented temperature range is satisfied.
推荐
GAL22V10 Board Replacement
ATF22V10C-15PI is appropriate for restoring GAL22V10-based logic boards because Microchip identifies the ATF22V10C family as pin-to-pin and JEDEC fusemap compatible with the GAL22V10. The replacement can therefore retain an existing through-hole board layout while using electrically erasable Flash configuration. This simplifies logic updates during maintenance because a new configuration can be downloaded without the UV-erasure process associated with fuse-programmed devices. Before replacement, compare the original device's AC and DC characteristics, temperature grade, and programming procedure with the ATF22V10C documentation.
推荐
Peripheral Address Decoding
The ATF22V10C-15PI can implement peripheral address decoding, chip-select generation, and bus-control equations in equipment built around older programmable-logic architecture. Ten macrocells provide enough configurable logic for moderate decoding and registered control functions, while the 15 ns speed grade allows predictable timing in address-validation paths. Because the configuration is electrically erasable, a controlled logic revision can be programmed into the same board position. The design should use the manufacturer's pin-description table to identify dedicated inputs, outputs, configuration pins, and power connections before final routing.
推荐
Telecommunications Interface Logic
ATF22V10C-15PI can serve as auxiliary logic in telecommunications equipment for signal routing, timing qualification, command decoding, and fault-state sequencing. The 24-pin PDIP package supports legacy systems that retain through-hole assembly, while the electrically erasable configuration permits controlled updates during maintenance. The device is most appropriate when the required equations fit within 10 macrocells and the system can operate from the nominal 5 V supply defined for the ATF22V10C family. Designers should verify the exact 5 V tolerance, output timing, and temperature limits for the selected speed grade.
推荐
Embedded State Machine
The ATF22V10C-15PI is useful for implementing compact state machines in legacy embedded-control equipment. Its macrocells can hold registered states, transition equations, output decode, and sequencing conditions without requiring a separate flash microcontroller. The 15 ns propagation delay defines the switching-performance target for the logic network, while the nominal 5 V operation aligns it with established 5 V control systems. Use the programming tool and fuse-map documentation for the ATF22V10C family, and validate every unused input and output state against the manufacturer's guidance.
推荐
Legacy Equipment Repair and Retrofit
ATF22V10C-15PI supports repair and retrofit programs for legacy boards that originally used GAL22V10-compatible logic. Its 24-pin PDIP package allows a like-for-like through-hole replacement when the PCB footprint, pin functions, supply requirements, and logic configuration match. Electrically erasable Flash also enables controlled recertification of modified logic during maintenance. For each repair, confirm the temperature grade and operating limits from the original equipment documentation, compare the replacement's timing and electrical characteristics, and verify the programmed configuration before reconnecting the board to its power and signal sources.
推荐
推荐产品汇总
工程参考数据: ATF22V10C-15PI ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ATF22V10C-15PU |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 24-PDIP | 24-PDIP - same package |
| Architecture | ATF22V10C 22V10 | ATF22V10C 22V10 |
| Macrocells | 10 macrocells | 10 macrocells |
| I/O Pins | 24 I/O pins | 24 I/O pins |
| Propagation Delay | 15 ns | 15 ns |
| Supply Voltage | 5 V nominal | 5 V nominal |
| Configuration Memory | Electrically erasable Flash memory | Electrically erasable Flash memory |
| GAL22V10 Compatibility | Pin-to-pin and JEDEC fusemap compatible | Pin-to-pin and JEDEC fusemap compatible |
关键差异点
- Maintains the established 15 ns GAL22V10-compatible logic interface (对比 ATF22V10C-15PU)
- Uses electrically erasable Flash configuration (对比 GAL22V10D-10LPNI)
- Provides a directly identified industrial-temperature 24-PDIP ordering code (对比 ATF22V10C-15PU)
设计说明
Do not treat every ATF22V10C ordering suffix as interchangeable. The -15PI device is identified as a 15 ns industrial-temperature 24-PDIP part, while ATF22V10C-15PU is listed separately as a 15 ns PDIP option. Before substitution, compare the ordering table, temperature range, supply limits, timing grade, and package drawing in the manufacturer documentation. This check is especially important in equipment originally assembled with GAL22V10 fuse-programmed devices.
Use the 24-pin PDIP footprint and follow the numbered pin assignments in the official ATF22V10C datasheet. Because the family is GAL22V10 compatible, the physical outline may match existing boards, but signal compatibility still depends on matching configuration architecture, supply, and operating conditions. Inspect the existing board for socketed components, bent pins, and pin-1 orientation before installation, and avoid forcing a replacement if the package rows are not aligned.
The ATF22V10C family operates from a nominal 5 V supply, and the manufacturer specifies the industrial speed-grade range as 5 V ±5%. Verify that the host board maintains the required voltage at the device pins under the intended load and temperature. Check input rise time, decoupling recommendations, and power sequencing in the datasheet rather than assuming that compatibility with a GAL22V10 board makes every electrical condition identical.
The 15 ns propagation-delay grade is a key family-level timing specification, but it does not by itself guarantee adequate system margin. Include output loading, external fanout, interconnect delay, and the programmed macrocell path in the timing review. Preserve the manufacturer's recommended unused-input and unused-output states, and use the device's specified setup and hold requirements in surrounding control logic.
ATF22V10C configuration uses electrically erasable Flash rather than the GAL22V10's original fuse-based architecture. Use a programmer and file format specifically intended for the ATF22V10C, and do not rely on an undocumented generic GAL22V10 programming procedure. After programming, verify the fuse map and exercise board-level reset and configuration behavior before returning the equipment to service.
合规信息
The ATF22V10C-15PI is an industrial-temperature logic device rather than an automotive-qualified product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the manufacturer or distributor records used for this product page.