ATMEGA32U4RC-MU - 8-bit AVR USB MCU 32KB 16MHz | Microchip
料号： ATMEGA32U4RC-MU ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $5.79 | $5.79 |
| 10 | $5.35 | $53.50 |
| 100 | $4.85 | $485.00 |
| 500 | $4.42 | $2,210.00 |
| 1,000 | $3.98 | $3,980.00 |
ATMEGA32U4RC-MU 概述
An 8-bit AVR microcontroller is a reduced-instruction-set (RISC) processor executing most of its 131 powerful instructions in a single clock cycle, positioned in the system hierarchy as the main embedded control IC between simple logic devices and 32-bit application processors. The ATmega32U4 family is widely known as the core of the Arduino Leonardo, where its native USB capability eliminates the external USB-to-serial converter required by ATmega328P-based boards.
Key features include 32KB self-programming Flash for in-application firmware updates, a 12-channel 10-bit ADC for analog sensing, and an on-chip JTAG interface for on-chip debugging. The RC designation indicates the enhanced-reliability Flash variant qualified for industrial temperature ranges in a RoHS-compliant, green package.
Technically, the device integrates a full-speed USB 2.0 transceiver and controller directly on the die, alongside UART, SPI, I2C (TWI) interfaces, multiple PWM channels and timer/counter resources. This single-chip integration reduces BOM cost and board area versus a two-chip MCU-plus-USB-UART solution.
Typical applications include USB HID devices (keyboards, mice, game controllers), Arduino Leonardo-compatible and Pro Micro compatible hobby and maker boards, and industrial control panels requiring 4.5V to 5.5V single-supply operation.
A key design consideration is supply voltage: the ATMEGA32U4RC-MU operates from 4.5V to 5.5V, so designs needing 3.3V operation must use the L variant instead. Keep the USB VBUS and UVcc supply paths properly decoupled for reliable enumeration.
This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing data as of 2026-09-18.
直接替换替代料： ATMEGA32U4RC-MU ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： ATMEGA32U4RC-MU （相同外形与封装尺寸） ——差异在于 EEPROM, Package, Debug Interface, SRAM, RoHS Status.
快速对比工具——选择替代料号进行并排对比：
ATMEGA32U4-MU
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$3.9336 / 个
查看数据手册 →ATMEGA16U4-MUR
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$2.35 / 个
查看数据手册 →ATMEGA32U4RC-MU 最大额定值与电气特性
| Core Architecture | 8-bit AVR RISC |
| Flash Program Memory | 32KB (16K x 16) |
| SRAM | 2.5KB |
| EEPROM | 1KB |
| 最大时钟频率 | 16 MHz |
| Supply Voltage Range | 4.5 V to 5.5 V |
| I/O Ports / GPIO Count | 32 |
| ADC Channels | 12-channel 10-bit ADC |
| USB Interface | USB 2.0 full-speed/low-speed device |
| Debug Interface | JTAG (on-chip-debug) |
| Instruction Set | 131 powerful instructions, mostly single-cycle |
| 封装 | 44-VQFN (7x7 mm), 0.80 mm pitch |
| 安装类型 | Surface Mount |
| 工作温度范围 | Industrial temperature range (-40C to +85C) |
| Life Cycle Stage | Active |
| RoHS / Green Package | Compliant (Green package per Mouser listing) |
ATMEGA32U4RC-MU compliant (green package per mouser listing) 引脚配置指南
ATMEGA32U4RC-MU（compliant (green package per mouser listing) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： ATMEGA32U4RC-MU.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATMEGA32U4RC-MU 适用于 6 应用s: USB HID Devices, Arduino Leonardo / Pro Micro Compatible Boards, Industrial Control Panels, USB Sensors and Data Loggers, Gaming Peripherals and Input Devices, Portable and Battery-Powered Instruments.
USB HID Devices
The ATMEGA32U4RC-MU fits USB HID applications such as custom keyboards, mice, game controllers and macro pads because its USB 2.0 full-speed device controller resides on-chip, removing the external USB-UART IC that ATmega328P designs require. With 32 GPIO lines and hardware PWM channels, it can scan a key matrix and drive per-key RGB or backlight LEDs directly at 5V. Firmware implements HID reports over the built-in transceiver, enabling driverless enumeration on Windows, macOS and Linux. Because the device is self-programming (32KB ISP Flash), bootloader-based USB firmware updates are possible without an external programmer, reducing manufacturing steps and allowing field-updatable consumer devices.
推荐
Arduino Leonardo / Pro Micro Compatible Boards
This part is the native MCU of Arduino Leonardo and Pro Micro compatible boards, so it suits any maker or educational product built on the Arduino AVR framework. According to Arduino documentation, the 32U4 handles USB internally, allowing the board to appear as a keyboard, mouse or serial CDC device without a second chip. The 44-VQFN (7x7 mm) package keeps board area small while the 12-channel 10-bit ADC supports analog joystick and sensor inputs at standard 5V logic levels. The Arduino bootloader (Caterina) resides in the self-programming Flash, so flashing occurs over the same USB port used at runtime, simplifying end-user experience and eliminating USB-to-serial converter BOM cost.
推荐
Industrial Control Panels
In industrial control panels, the ATMEGA32U4RC-MU operates across the industrial temperature range from a 4.5V to 5.5V supply, tolerating noisy 5V rails common in panel wiring. The 12-channel 10-bit ADC reads potentiometers, current-shunt amplifiers and sensor bridges, while 32 GPIO lines drive relays, indicators and optocoupled inputs. The JTAG interface enables on-chip debugging during commissioning, which shortens fault isolation on site. The RC enhanced-reliability Flash process targets exactly this class of long-life, high-duty-cycle equipment, and the 1KB EEPROM retains calibration and configuration data across power cycles without external nonvolatile memory.
推荐
USB Sensors and Data Loggers
The ATMEGA32U4RC-MU suits USB-powered sensor nodes and data loggers because the on-chip USB device controller streams measurements directly to a host PC as a virtual COM port or HID device, needing no external bridge IC. The 12-channel 10-bit ADC samples up to 12 analog inputs, and 2.5KB SRAM buffers acquisition blocks between host polls. Self-programming Flash supports field firmware upgrades over the existing USB cable, important for deployed instruments. Since the part runs from 5V, it can be powered directly from the USB VBUS rail with local decoupling, removing boost converters required by 3.3V-only MCUs and simplifying the analog front-end supply design.
推荐
Gaming Peripherals and Input Devices
Gaming keyboards, mice, flight sticks and fight sticks benefit from the ATMEGA32U4RC-MU's combination of fast polling-capable USB 2.0 full-speed transfer and abundant peripherals. The 16 MHz AVR core scans large button matrices and computes debounce and macro logic, while hardware PWM and timer/counters generate haptic or LED effects. 32 GPIO lines provide matrix scan capacity without external expanders, keeping BOM cost low at 5V logic levels. The RC-grade Flash withstands the frequent firmware rewrites typical of consumer peripheral customization software, and the compact 44-VQFN (7x7 mm) footprint fits slim handheld and palm-rest housings.
推荐
Portable and Battery-Powered Instruments
For handheld instruments that recharge or communicate over USB, the ATMEGA32U4RC-MU consolidates the MCU and USB interface in one chip, reducing board area inside enclosures. The 4.5V to 5.5V input range pairs with a single-cell boost converter or four-cell NiMH pack, and the 1KB EEPROM stores calibration constants through battery swaps. The 10-bit ADC handles sensor channels, and JTAG supports production programming and test fixtures. Where ultra-long battery life dominates, an L-variant or 32-bit MCU may be preferable, but for 5V systems needing USB HID or CDC with proven Arduino ecosystem tools, this part minimizes development risk and time to market.
推荐
推荐产品汇总
工程参考数据： ATMEGA32U4RC-MU ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ATMEGA32U4-MU | ATMEGA16U4-MU |
|---|---|---|---|
| Package | 44-VQFN (7x7 mm) | 44-VQFN (7x7 mm) - same | 44-VQFN (7x7 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 32KB | 32KB | 16KB |
| SRAM | 2.5KB | 2.5KB | 1.25KB |
| EEPROM | 1KB | 1KB | 512B |
| Max Clock Frequency | 16 MHz | 16 MHz | 16 MHz |
| USB Controller | USB 2.0 full-speed/low-speed device | USB 2.0 full-speed/low-speed device | USB 2.0 full-speed/low-speed device |
| Flash Process | RC enhanced-reliability | Standard Flash | Standard Flash |
关键差异点
- Enhanced-reliability RC Flash process （对比 ATMEGA32U4-MU)
- 2x program memory on the same footprint （对比 ATMEGA16U4-MU)
- Integrated USB 2.0 full-speed device controller （对比 ATMEGA328P-MU)
设计说明
The ATMEGA32U4RC-MU is a 5V-only device: the supply range is 4.5V to 5.5V, and full 16 MHz operation requires the top of that range. When powering from USB, connect VBUS through UVcc with local decoupling (typically 1 uF plus 100 nF at the pin) and never back-feed 5V into a host. Battery or 3.3V systems need a boost regulator to reach 4.5V minimum; alternatively select an L-variant for 3.3V operation. Estimated: a 3.7V nominal Li-ion cell directly will not meet the 4.5V minimum - a boost converter is mandatory.
The 44-VQFN (7x7 mm) package has a 0.80 mm pitch and an exposed center pad that must be soldered to a grounded copper pour. Create the land pattern per the manufacturer datasheet with via stitching under the pad to tie the die ground to the board ground plane - a floating or under-tented pad commonly causes erratic USB enumeration. Place the 16 MHz crystal within a few millimeters of XTAL1/XTAL2 with short return traces, and route the USB D+/D- pair as a matched 90-ohm differential pair directly to the connector.
Do not confuse ordering-code suffixes: -MU is the 44-VQFN package while -AU is the 44-pin TQFP - they are not footprint-compatible. The RC variant uses an enhanced-reliability Flash process; if your supply chain substitutes the standard ATMEGA32U4-MU, verify this is acceptable for your end-product reliability requirements. Also remember the HWB pin (PE2) state at reset selects bootloader entry - pull it appropriately so production units boot application firmware, not the USB bootloader, unless bootloader entry is intended.
合规信息
Mouser listing describes the part as 'Ind Temp Grn' (industrial temperature, green package), indicating RoHS-compliant lead-free green packaging. AEC-Q100 qualification is not claimed for this standard AVR part; Microchip offers separate automotive AVR variants for that market.
