Microchip Technology

ATSAM4LC2CA-CFUR - Cortex-M4 48MHz 128KB MCU | Microchip

料号: ATSAM4LC2CA-CFUR ✓ 量产中
有现货 1-3 个工作日内发货
1.68 V to 3.6 V Vdss 100-VFBGA (7x7 mm) Package 48 MHz Speed 128KB (128K x 8) Memory
低至 $3.28 USD / 件
最小起订量: 1 |
价格更新于: 2026-09-19
批量定价
数量 单价 小计
1 $4.62 $4.62
10 $4.21 $42.10
100 $3.84 $384.00
500 $3.55 $1,775.00
1,000 $3.28 $3,280.00
ℹ️ 所有价格均以 USD 计价

ATSAM4LC2CA-CFUR 概述

The Microchip Technology ATSAM4LC2CA-CFUR is a 32-bit ARM Cortex-M4 microcontroller running at up to 48 MHz with 128KB (128K x 8) of embedded Flash memory, housed in a 100-ball VFBGA (7x7 mm) package on tape and reel. It operates from a 1.62V to 3.6V supply (1.8V, 2.5V, and 3.3V nominal rails) across the industrial temperature range.

A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals on one die. MCUs sit at the heart of the embedded systems hierarchy - below application processors and above dedicated ASICs - and the SAM4L family belongs to the 32-bit ARM Cortex-M class of flash microcontrollers used for low-power control and connectivity tasks.

Key features of the ATSAM4LC2CA-CFUR include the high-performance ARM Cortex-M4 RISC core with 48 MHz maximum frequency, 128KB on-chip Flash for program storage, and the low-power SAM4L architecture that emphasizes energy-efficient operation. The VFBGA-100 (7x7 mm) ball grid array minimizes board area for space-constrained designs, and per distributor listings the device integrates cryptographic hardware support (CRYPTO) and carries RoHS-green packaging.

Technically, the SAM4L series implements the ARMv7E-M architecture with a 3-stage pipeline, providing DSP-oriented instructions and efficient interrupt handling. The die is fabricated for industrial-grade operation, and Microchip (via the Atmel acquisition) supplies the 1200-plus-page SAM4L datasheet covering power modes, peripheral sets, and memory organization for the family.

Typical applications include battery-powered portable instruments, industrial sensors and actuators, building automation nodes, and consumer devices that need 32-bit processing in a compact 7x7 mm footprint. The Cortex-M4 core with DSP capability suits digital filtering and control loops, while the low-power design supports long battery life.

When designing with this device, confirm the exact supply range and peripheral mapping against the manufacturer datasheet before layout, and verify BGA land pattern and reflow profile compatibility for the 0.8 mm ball pitch VFBGA package.

This page synthesizes distributor pricing context, drop-in alternatives within the SAM4L family, and practical design notes not found in a single manufacturer datasheet, giving engineers and buyers a consolidated reference for the ATSAM4LC2CA-CFUR.

直接替换替代料: ATSAM4LC2CA-CFUR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: ATSAM4LC2CA-CFUR (相同外形与封装尺寸) ——差异在于 Packaging, Operating Temperature, Series, Core Size, Mounting Type.

Microchip Technology
Packaging: Tray
Series: SAM4L (ATSAM4LC2)
Core Size: 32-Bit
对比 ATSAM4LC2CA-CFUR →
Microchip Technology
Packaging: Tray
Operating Temperature: -40C to +85C
Core Size: 32-Bit
对比 ATSAM4LC2CA-CFUR →
Microchip Technology
Packaging: Tape & Reel (R suffix)
Operating Temperature: Industrial range (-40C to +85C per IND TEMP grading)
Series: SAM4L (ATSAM4LS4)
对比 ATSAM4LC2CA-CFUR →

快速对比工具——选择替代料号进行并排对比:

ATSAM4LC4CA-CFUR

✅ 直接替换
📦 100-VFBGA (7x7)
Flash 256KB vs 128KB (+100%); same Cortex-M4 48MHz core, same VFBGA-100 footprint, pin-to-pin compatible

📋 参考替代料(不在目录中)

ATSAM4LC4CA-CFU

✅ 直接替换
📦 100-VFBGA (7x7)
Flash 256KB vs 128KB; non-R packing variant of the same family die, same 100-VFBGA footprint

📋 参考替代料(不在目录中)

ATSAM4LC2CA-CFU

✅ 直接替换
Microchip Technology
📦 100-VFBGA (7x7)
ARM Cortex-M4 · 32-Bit · 48 MHz · 128 KB (128K x 8) · FLASH · 32K x 8 · 1.68 V to 3.6 V · 1.8 V / 2.5 V / 3.3 V

✓ 有现货

$3.48 / 个

查看数据手册 →

ATSAM4LC8CA-CFU

✅ 直接替换 ⚠️ 规格未核验
Microchip Technology
📦 100-VFBGA (7x7)
ARM Cortex-M4 · 32-Bit · 48 MHz · 512 KB (512K x 8) · 1.8 V / 2 V / 2.3 V / 3.3 V · 90 uA/MHz · 1.5 uA

✓ 有现货

$7.57 / 个

查看数据手册 →

ATSAM4LC2CA-CFUR 最大额定值与电气特性

Core Processor ARM Cortex-M4
Core Architecture 32-bit RISC
Core Size 32-bit single-core
最大时钟频率 48 MHz
Flash Memory 128KB (128K x 8)
Supply Voltage Range 1.68 V to 3.6 V
Nominal Supply Voltages 1.8 V / 2.5 V / 3.3 V
工作温度 -40C to +85C (Industrial)
封装 100-VFBGA (7x7 mm)
安装类型 Surface Mount (BGA)
Packaging Tape & Reel (T/R)
Special Features Cryptographic hardware (CRYPTO)
Series SAM4L
RoHS 状态 Compliant (BGA Green per Mouser listing)
Number of Terminals 100
Terminal Form Ball

ATSAM4LC2CA-CFUR 100-vfbga (7x7 mm) 引脚配置指南

ATSAM4LC2CA-CFUR(100-vfbga (7x7 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

ATSAM4LC2CA-CFUR 的 100-vfbga (7x7 mm) 封装引脚图

暂无详细引脚数据: ATSAM4LC2CA-CFUR.

请参阅 数据手册 以查看完整引脚配置。

典型应用

ATSAM4LC2CA-CFUR 适用于 6 应用s: Battery-Powered Portable Instruments, Industrial Sensor Nodes and Actuators, Building Automation and IoT Endpoints, Consumer Electronics Control Boards, Medical and Health Monitoring Devices, Secure Access and Authentication Tokens.

📱

Battery-Powered Portable Instruments

The ATSAM4LC2CA-CFUR fits battery-powered portable instruments because its SAM4L architecture pairs a 48 MHz Cortex-M4 core with a low-power design philosophy and a 1.68V to 3.6V supply window that maps directly onto single-cell Li-ion or 2xAA power trees. In a typical handheld meter or data logger, the MCU runs data acquisition and display updates in run mode, then drops into deep sleep between samples; the industrial -40C to +85C rating keeps the device reliable in outdoor field use. The 128KB Flash accommodates firmware with calibration tables, communication stacks, and a small GUI driver without external memory. Because the VFBGA-100 package occupies only 7x7 mm, the board area is dominated by the battery and display rather than the controller, and the integrated crypto engine can sign logged readings for tamper evidence.

🏭

Industrial Sensor Nodes and Actuators

In industrial sensing and actuation nodes, the ATSAM4LC2CA-CFUR provides the deterministic Cortex-M4 processing needed for digital filtering, PID control loops, and protocol handling at 48 MHz while meeting the -40C to +85C industrial temperature grade required on factory floors. The 128KB Flash is sufficient for a Modbus or CAN application layer plus sensor compensation routines, and the on-chip cryptographic hardware (CRYPTO per Mouser listing) enables authenticated node identity in Industry 4.0 deployments. Powering directly from a 3.3V rail within the 1.68V to 3.6V range simplifies the power tree next to 24V field-power modules with a small buck converter. The 100-ball VFBGA keeps the controller footprint small on dense sensor boards, and tape-and-reel packing supports automated high-volume assembly of node electronics.

🧩

Building Automation and IoT Endpoints

Building automation endpoints such as occupancy sensors, damper controllers, and HVAC zone modules benefit from the ATSAM4LC2CA-CFUR's combination of 32-bit performance, low-power operation, and integrated cryptography. The 48 MHz Cortex-M4 core executes network stacks (for example a lightweight wireless or wired protocol) with margin, while 128KB Flash stores the stack, configuration, and OTA-adjacent boot code for compact endpoints. Supply operation at 3.3V within the 1.68V to 3.6V window is standard in these systems, and multiple low-power modes allow battery or energy-harvesting nodes to sleep between polls. The crypto engine supports secure commissioning and message authentication, increasingly mandated in commercial building networks. The 7x7 mm VFBGA-100 suits the compact PCBs used inside wall sensors and valve actuators where every square millimeter matters.

🔧

Consumer Electronics Control Boards

Consumer product control boards - small appliances, toys with interactive features, personal care devices - use the ATSAM4LC2CA-CFUR where 8/16-bit controllers run out of headroom but cost must stay controlled. The 128KB Flash removes the need for external program memory, and the 48 MHz Cortex-M4 with DSP instructions handles touch sensing, motor commutation assistance, and audio feedback with margin. Operating at 3.3V inside the 1.68V to 3.6V range matches single-buck or LDO-derived rails typical in consumer designs. The green, RoHS-compliant VFBGA-100 package supports lead-free reflow lines and keeps the controller out of the way of batteries and enclosures. Tape-and-reel supply supports the high production volumes of consumer manufacturing, and Microchip's long-lifecycle management of the SAM4L family reduces mid-program component change risk.

💊

Medical and Health Monitoring Devices

Portable health monitors - pulse oximetry boards, activity trackers, and home diagnostic accessories - leverage the ATSAM4LC2CA-CFUR's low-power Cortex-M4 with DSP instructions for real-time signal processing such as IIR/FIR filtering of physiologic waveforms at 48 MHz. The 1.68V to 3.6V supply range supports direct operation from Li-ion cells with a small LDO, and sleep-mode operation extends battery life in always-on monitoring use. The on-chip crypto hardware helps protect patient data at the point of collection, aligning with privacy-by-design practices, while the industrial temperature rating covers storage and transport extremes. With 128KB Flash, acquisition firmware, calibration data, and a BLE-adjacent application layer fit without external memory, and the 7x7 mm VFBGA-100 package allows very compact wearable PCB geometry.

🎥

Secure Access and Authentication Tokens

Secure access tokens, smart lock controllers, and authenticated sensor keys exploit the ATSAM4LC2CA-CFUR's integrated cryptographic acceleration noted in distributor listings (CRYPTO feature, industrial grade). The 48 MHz Cortex-M4 executes AES-class operations in hardware while the core handles UI, radio interfacing, and state machines; 128KB Flash stores keys-in-context code, secure boot logic, and a compact communication stack. Powering from a 3V coin cell or 3.3V rail within the 1.68V to 3.6V window, the device spends most of its life in low-power states, extending battery service intervals. The 7x7 mm VFBGA-100 fits inside slim token and lock-module enclosures, and the BGA interconnect improves mechanical robustness against vibration compared with fine-pitch leaded packages in portable security hardware.

推荐产品汇总

ATSAM4LC4CA-CFUR Same-footprint upgrade with 256KB Flash 用于: Battery-Powered Portable Instruments, Industrial Sensor Nodes and Actuators, Building Automation and IoT Endpoints, Consumer Electronics Control Boards, Medical and Health Monitoring Devices, Secure Access and Authentication Tokens ATSAM4LC2CA-CFU Microchip Technology 用于: Battery-Powered Portable Instruments, Consumer Electronics Control Boards, Secure Access and Authentication Tokens ATSAM3N4BA-MU Microchip Technology 用于: Industrial Sensor Nodes and Actuators ATSAM4E16CB-CN Microchip Technology 用于: Building Automation and IoT Endpoints ATSAM4LC8CA-CFU Microchip Technology 用于: Medical and Health Monitoring Devices
What is the ATSAM4LC2CA-CFUR microcontroller?
The ATSAM4LC2CA-CFUR is a 32-bit ARM Cortex-M4 flash microcontroller from Microchip Technology (originally Atmel) in the SAM4L series. It runs at up to 48 MHz, integrates 128KB (128K x 8) of Flash memory, operates from a 1.68V to 3.6V supply, and is packaged in a 100-ball VFBGA measuring 7x7 mm, supplied on tape and reel for automated assembly.
What are the key specifications of ATSAM4LC2CA-CFUR that engineers should know?
Core specs: ARM Cortex-M4 32-bit core at 48 MHz, 128KB Flash, 1.68V to 3.6V supply range, industrial temperature rating, cryptographic hardware acceleration, and a 100-ball VFBGA (7x7 mm) package. According to distributor listings (DigiKey, Mouser, Octopart), the part is RoHS/green packaged and supplied on tape and reel. Always confirm SRAM size and peripheral counts against the official Microchip SAM4L datasheet before finalizing a design.
What is the difference between ATSAM4LC2CA-CFUR and ATSAM4LC4CA-CFUR?
The primary difference is Flash memory capacity: the ATSAM4LC4CA-CFUR provides 256KB of Flash while the ATSAM4LC2CA-CFUR provides 128KB, as shown in the Utmel comparison of the two parts. Both use the same 100-VFBGA (7x7 mm) package and the same ARM Cortex-M4 48 MHz core, so the LC4CA variant is a same-footprint upgrade when more program space is required.
What is the best drop-in replacement for ATSAM4LC2CA-CFUR?
Within the same SAM4L family, the ATSAM4LC4CA-CFUR (256KB Flash, same 100-VFBGA package) and the ATSAM4LC2CA-CFU (non-R suffix, available via Rochester Electronics at DigiKey) are the closest drop-in candidates. Flash-denser family members remain footprint-compatible in the VFBGA-100. Always verify pin mapping and voltage ratings against the Microchip SAM4L datasheet before substituting.
Is ATSAM4LC2CA-CFUR the same as ATSAM4LC2CA-CFU?
Functionally yes - both are the same SAM4L Cortex-M4 48 MHz, 128KB Flash device in a 100-VFBGA (7x7 mm) package. The R suffix indicates tape-and-reel packaging for high-volume automated placement, while the non-R part is supplied in alternative packing. DigiKey lists the non-R ATSAM4LC2CA-CFU via Rochester Electronics with identical electrical specifications, making it an effective packing-variant substitute.
Where can I download the ATSAM4LC2CA-CFUR datasheet PDF?
The official ATSAM4LC2CA-CFUR datasheet is available from the Microchip Technology product page at microchip.com (the SAM4L family was originally documented by Atmel; the combined PDF exceeds 1200 pages per AiPCBA's listing). Mirror copies exist on datasheets.com and datasheetq.com, but always prefer the Microchip official download to guarantee the latest revision and errata.
Where can I buy ATSAM4LC2CA-CFUR and what does it cost?
The ATSAM4LC2CA-CFUR is listed by distributors including DigiKey (digikey.ca listing 3995709), Mouser, Octopart (2 distributors compared), and secondary sources such as Vyrian and Partstack. Indicative unit pricing on XAIPART starts near USD 4.62 at quantity 1, declining to roughly USD 3.28 at 1000 pieces, as of 2026-09-20. Request formal quotes for volume pricing and lead times.
Is ATSAM4LC2CA-CFUR in stock and what is the lead time?
Stock status varies by distributor. DigiKey and Mouser historically carry the Microchip SAM4L line, and Octopart reports two distributors offering the part, while broker sites such as LoveChip and Vyrian advertise stock. Because availability changes daily, check the distributor listings directly; for volume requirements, request a quote from Microchip or authorized distribution for factory lead time as of 2026-09-20.
What is the operating voltage range of ATSAM4LC2CA-CFUR?
The ATSAM4LC2CA-CFUR operates from 1.68V to 3.6V per the MOST Electronics product listing, supporting nominal rails of 1.8V, 2.5V, and 3.3V. Design your power tree so the VDDCore/VDDIO rails stay within this window including tolerances; the datasheet's electrical characteristics chapter defines exact minimum, typical, and maximum values for each supply domain.
Is the ATSAM4LC2CA-CFUR suitable for battery-powered portable devices?
Yes. The SAM4L series is explicitly designed for low-power applications, combining the 48 MHz Cortex-M4 core with an efficient power architecture and multiple sleep modes, and the compact 7x7 mm VFBGA-100 package suits wearables and portable instruments. For a definitive battery-life estimate, consult the datasheet's power consumption tables for run, wait, and backup mode currents at your operating frequency and voltage.
Does the ATSAM4LC2CA-CFUR include cryptographic hardware?
Yes. The Mouser product listing describes the part as 'BGA Green, IND TEMP, CRYPTO', indicating the device includes cryptographic hardware support. This makes it appropriate for secure IoT nodes, authenticated sensor data, and encrypted communication links. Refer to the Microchip SAM4L datasheet security chapter for the supported algorithms and key storage details.
What package does the ATSAM4LC2CA-CFUR use and how should the PCB footprint be designed?
The device uses a 100-ball VFBGA in a 7x7 mm body, supplied on tape and reel. Design the PCB land pattern per the Microchip SAM4L datasheet mechanical drawing and IPC BGA land-pattern guidance, plan for reflow profiling appropriate to BGA packages, and provide adequate via-in-pad or escape routing under the 0.8 mm ball grid. X-ray inspection is recommended for volume production yield assurance.
When should I choose ATSAM4LC2CA-CFUR over ATSAM4LC4CA-CFUR?
Choose the ATSAM4LC2CA-CFUR when your application fits within 128KB of Flash and you want the lowest device cost - it is ideal for sensor hubs, simple control loops, and connected nodes with lean firmware. Choose the ATSAM4LC4CA-CFUR (256KB Flash, same package) when your code base needs headroom for RTOS stacks, OTA update dual-bank images, or growth. Both share the same footprint, so migration later requires no PCB rework.
What is the best Microchip-equivalent strategy if ATSAM4LC2CA-CFUR is unavailable?
Use Microchip's own cross-reference tool (microchip.com cross-reference search) and DigiKey's cross-reference tool, both of which list parametrically similar SAM4L devices. The closest in-family substitutes are ATSAM4LC4CA-CFUR (more Flash, same footprint), ATSAM4LC2CA-CFU (same die, different packing), and the larger LC8CA variant. Per Microchip support guidance, filter candidates by pin count and package to confirm pin compatibility before release.
What ARM Cortex-M4 alternatives from other brands exist for ATSAM4LC2CA-CFUR?
Cross-brand Cortex-M4 MCUs with comparable 48 MHz-class performance and 128KB Flash exist from STMicroelectronics, NXP, and others, but none of them share the 100-VFBGA pinout of the SAM4L, so no verified cross-brand drop-in replacement was found in the cross-reference data for this part. Any cross-brand migration requires PCB redesign and firmware porting; use parametric search plus Microchip's migration documentation to evaluate candidates.
What tools are used to develop for the ATSAM4LC2CA-CFUR?
Develop with Microchip's Atmel Studio / Microchip Studio IDE, the SAM4L software frameworks, and ARM Cortex-M4 debug tools via the Serial Wire Debug interface on an SAM-ICE/J-Link-class programmer. Per vendor product pages and distributor support notes, Microchip also provides pinout files, application notes, and schematic examples for SAM4L designs, all downloadable from the Microchip product page for the ATSAM4LC2CA.

工程参考数据: ATSAM4LC2CA-CFUR ——对比、设计指导和合规信息。

选型指南

Choose the ATSAM4LC2CA-CFUR when your firmware fits in 128KB of Flash and you want the lowest-cost SAM4L device in the compact 7x7 mm VFBGA-100 footprint with crypto hardware and industrial temperature rating - ideal for battery-powered instruments, sensor nodes, and consumer control boards. Choose ATSAM4LC4CA-CFUR when you need 256KB for RTOS stacks, dual-bank OTA updates, or growth headroom; it is pin-to-pin compatible, so no PCB redesign is needed. Choose ATSAM4LC2CA-CFU (non-R) if your assembly process uses tray packing or if the R version is stocked out - it is the same die per the Rochester Electronics DigiKey listing. Choose ATSAM4LC8CA-CFU only for algorithm-heavy designs needing up to 512KB. No verified cross-brand drop-in exists in this package, so any non-Microchip substitution requires a board respin; the honest trade-off within the family is purely Flash size versus unit cost.

与替代料对比

参数 本产品 ATSAM4LC4CA-CFUR ATSAM4LC4CA-CFU ATSAM4LC2CA-CFU ATSAM4LC8CA-CFU
Package 100-VFBGA (7x7 mm) 100-VFBGA (7x7 mm) - same 100-VFBGA (7x7 mm) - same 100-VFBGA (7x7 mm) - same 100-VFBGA (7x7 mm) - same
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Core / Max Frequency ARM Cortex-M4 / 48 MHz ARM Cortex-M4 / 48 MHz ARM Cortex-M4 / 48 MHz ARM Cortex-M4 / 48 MHz ARM Cortex-M4 / 48 MHz
Flash Memory 128KB (128K x 8) 256KB 256KB 128KB 512KB
Supply Voltage 1.68 V to 3.6 V 1.62 V to 3.6 V 1.62 V to 3.6 V 1.62 V to 3.6 V 1.62 V to 3.6 V
Temperature Grade Industrial (-40C to +85C) Industrial Industrial Industrial Industrial
Cryptographic Hardware Yes (CRYPTO) Yes (CRYPTO) Yes (CRYPTO) Yes (CRYPTO) Yes (CRYPTO)
Packaging / Availability Note Tape & Reel (R suffix) Tape & Reel Non-R packing; listed via DigiKey/Utmel Non-R packing; listed via Rochester Electronics at DigiKey Non-R packing; verify stock

关键差异点

  • 128KB Flash at the lowest family price point (对比 ATSAM4LC4CA-CFUR)
  • Integrated cryptographic hardware (对比 Generic Cortex-M4 MCUs at similar price)
  • Compact 7x7 mm 100-ball BGA (对比 ATSAM4LC4CA-CFU)

设计说明

The ATSAM4LC2CA-CFUR is supplied in a 100-ball VFBGA with a 7x7 mm body. Follow the Microchip SAM4L datasheet mechanical drawing for the exact land pattern (ball diameter and pitch), and apply standard BGA assembly practice: escape routing or via-in-pad with filled/plated vias under the array, solder-mask-defined or non-solder-mask-defined pads per the datasheet recommendation, and a reflow profile qualified for lead-free BGA assemblies. Recommend X-ray or AMI inspection at production ramp to catch voiding and bridging under the array.

Operate the device within the 1.68V to 3.6V supply window reported by distributors, with 1.8V, 2.5V, or 3.3V as nominal rails. Estimated: at 3.3V with a 100 mV of rail tolerance plus regulator ripple, worst-case still leaves over 300 mV margin to the lower limit, but a brown-out detector should be enabled so the MCU resets cleanly below the validated operating threshold. Decouple each supply ball with 100 nF ceramics placed as close to the ball as routing allows, plus bulk capacitance per the SAM4L datasheet power-supply chapter.

Do not confuse the R and non-R order codes: ATSAM4LC2CA-CFUR is the tape-and-reel version, while ATSAM4LC2CA-CFU ships in alternate packing - electrically identical per DigiKey's Rochester Electronics listing, but packing differences affect feeder compatibility on high-speed placement lines. Also, when migrating to ATSAM4LC4CA-CFUR or ATSAM4LC8CA-CFU for more Flash, confirm the exact family pinout and voltage range against the Microchip datasheet and re-verify any clock configuration tied to Flash wait states before releasing the firmware.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Yes
无卤
Yes
冲突矿物
Unknown

Mouser listing describes the part as 'BGA Green, IND TEMP', indicating RoHS-green, halogen-free BGA packaging with industrial temperature grade. REACH and conflict-minerals status not stated in provided data.

数据核验日期: 2026-09-20 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

ATSAM4LC2CA-CFUR ATSAM4LC2CA-CFUR datasheet PDF Microchip ATSAM4LC2CA-CFUR ARM Cortex-M4 48MHz 128KB Flash microcontroller VFBGA-100 ATSAM4LC2CA-CFUR pinout VFBGA 100 ATSAM4LC2CA-CFUR vs ATSAM4LC4CA-CFUR ATSAM4LC2CA-CFUR drop-in replacement ATSAM4LC2CA-CFUR price buy ATSAM4LC2CA-CFUR stock lead time low power Cortex-M4 MCU battery powered device what can replace ATSAM4LC2CA-CFUR SAM4L series microcontroller secure IoT

相关元器件 & 术语

Microchip Technology Atmel ATSAM4LC2CA-CFUR ATSAM4LC4CA-CFUR ATSAM4LC2CA-CFU ATSAM4LC8CA-CFU SAM4L series ARM Cortex-M4 32-bit microcontroller MCU RISC processor VFBGA-100 BGA (ball grid array) surface mount Flash memory 128KB Flash RoHS industrial temperature grade cryptographic hardware battery-powered portable devices IoT endpoints building automation tape and reel Serial Wire Debug Microchip Studio
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
合计: $0.00 USD
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情