ATSAMD21J17D-AFT - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip
料号： ATSAMD21J17D-AFT ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $4.42 | $4.42 |
| 10 | $3.95 | $39.50 |
| 100 | $3.49 | $349.00 |
| 500 | $3.12 | $1,560.00 |
| 1,000 | $2.78 | $2,780.00 |
ATSAMD21J17D-AFT 概述
An ARM Cortex-M0+ microcontroller is a low-power 32-bit processor core built on the ARMv6-M architecture, designed for energy-efficient embedded applications. It bridges the gap between 8-bit MCUs and higher-performance Cortex-M3/M4 cores, offering Thumb-2 instruction set compatibility, deterministic interrupt handling, and ultra-low sleep current. The SAM D21 line extends this with Microchip's peripheral event system and SERCOM configurability, allowing each serial interface to be reassigned as UART, SPI, or I2C at runtime. This hierarchy - Cortex-M0+ -> ARMv6-M core -> microcontroller -> embedded system - explains why the ATSAMD21J17D-AFT appears across consumer, industrial, and IoT designs.
Key features include 128 KB Flash, 16 KB SRAM, 48 MHz CPU clock, full-speed USB 2.0 device with on-chip transceiver, six SERCOM modules, a 12-bit 350 ksps ADC with up to 20 channels, a 10-bit DAC, and an extended operating temperature range up to +125 C. The device operates from 1.62 V to 3.63 V supply and integrates a brown-out detector, watchdog timer, and RTC. The TQFP-64 footprint simplifies hand-prototyping and optical inspection during early-stage development.
Typical applications include home automation controllers, smart energy metering, consumer HID devices with USB, industrial sensor nodes, and wearables. The wide operating temperature range and FuSa-ready peripheral set also suit automotive aftermarket products and factory automation peripherals.
When designing with this part, reserve the SERCOM pins carefully because each module must be mapped to specific pads through the I/O multiplexing matrix. Add a 1 µF plus 0.1 µF decoupling pair close to VDD and VDDIO pins, and follow USB-IF layout guidelines for the D+/D- traces to retain full-speed signaling margin.
This page synthesizes distributor pricing, drop-in alternatives within the SAM D21 family, and practical design notes not found in the standalone manufacturer datasheet, giving engineers a consolidated decision view.
直接替换替代料： ATSAMD21J17D-AFT ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： ATSAMD21J17D-AFT （相同外形与封装尺寸） ——差异在于 ADC, Flash Memory, DAC, Package, Core.
快速对比工具——选择替代料号进行并排对比：
ATSAMD21J17D-AU
✅ 直接替换✓ 有现货
$2.2272 / 个
查看数据手册 →ATSAMD21J17A-AF
✅ 直接替换✓ 有现货
$2.65 / 个
查看数据手册 →ATSAMD21J17A-AUT
✅ 直接替换✓ 有现货
$3.3 / 个
查看数据手册 →ATSAMD21J18A-AFT
✅ 直接替换✓ 有现货
$2.71 / 个
查看数据手册 →ATSAMD21J16B-AF
✅ 直接替换✓ 有现货
$2.52 / 个
查看数据手册 →ATSAMD21J17D-AFT 最大额定值与电气特性
| Core | ARM Cortex-M0+ (SAM D21J, Functional Safety (FuSa) capable) |
| Bit Width | 32-bit |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 128 KB (128K x 8) |
| SRAM | 16 KB |
| 封装 | 64-pin TQFP (10x10 mm) |
| 安装类型 | Surface Mount |
| Supply Voltage (VDD) | 1.62 V to 3.63 V |
| 工作温度 | -40 C to +125 C (extended) |
| USB Interface | USB 2.0 Full-Speed Device with on-chip transceiver |
| Serial Interfaces | Up to 6 SERCOM (UART/SPI/I2C configurable) |
| ADC | 12-bit, up to 350 ksps |
| DAC | 10-bit |
| Timers | TC/TCC, RTC, WDT |
| I/O Voltage | 1.62 V to 3.63 V |
| RoHS 状态 | Compliant |
ATSAMD21J17D-AFT 64-pin tqfp (10x10 mm) 引脚配置指南
ATSAMD21J17D-AFT（64-pin tqfp (10x10 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： ATSAMD21J17D-AFT.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATSAMD21J17D-AFT 适用于 6 应用s: USB Human Interface Devices (HID), Smart Energy Metering, Home Automation Controllers, Industrial Sensor Nodes, Wearables and Fitness Bands, Consumer Toys and Hobby Electronics.
USB Human Interface Devices (HID)
The ATSAMD21J17D-AFT's integrated USB 2.0 Full-Speed device controller and on-chip transceiver make it ideal for HID peripherals such as keyboards, mice, game controllers, and custom input devices. With 128 KB Flash it comfortably hosts HID report descriptors, debouncing logic, and USB stacks like LUFA or TinyUSB, while the Cortex-M0+ at 48 MHz handles polling rates above 1 kHz. Place a 1.5 kohm pull-up on D+ for full-speed detection, follow 90 ohm differential routing for D+/D-, and use the 16 KB SRAM as ring-buffer memory for incoming reports without dropping packets.
推荐
Smart Energy Metering
For electricity, water, or gas metering, the ATSAMD21J17D-AFT combines a 12-bit ADC up to 350 ksps with the Cortex-M0+ core and 128 KB Flash to host metering algorithms, LCD driving, and tamper-detection logic in a single chip. The 16 KB SRAM supports rolling-window RMS calculations, and the extended -40 C to +125 C operating range meets indoor/outdoor meter enclosure requirements. Use a TC channel for pulse counting and a SERCOM UART for optoisolated M-Bus or wireless module connectivity, and pair with an external precision current shunt for class-1 accuracy.
推荐
Home Automation Controllers
The ATSAMD21J17D-AFT suits home automation hubs and edge nodes thanks to its six configurable SERCOM channels that can run UART, SPI, or I2C simultaneously for sensors, RF modules, and actuators. The 128 KB Flash accommodates Wi-Fi/BLE provisioning logic and OTA bootloaders, while 16 KB SRAM handles JSON parsing and MQTT buffering. Operating from 1.62 V to 3.63 V lets the MCU share a coin-cell or 2x AA supply with boost regulation, and the RTC with calendar mode enables accurate wake-on-event timing.
推荐
Industrial Sensor Nodes
In factory automation and condition monitoring, the ATSAMD21J17D-AFT's 12-bit ADC, six SERCOM channels, and 48 MHz Cortex-M0+ deliver deterministic sensing with low latency. The extended +125 C operating temperature supports unheated enclosures near motors, and 128 KB Flash is ample for IEC 61131-style logic plus a vendor-specific diagnostics shell. Route SERCOM UART to RS-485 transceivers and use the TCC for PWM-driven valve or motor control; the event system can chain ADC sampling to timers without CPU intervention, reducing jitter in closed-loop control.
推荐
Wearables and Fitness Bands
The ATSAMD21J17D-AFT fits wearable designs that need USB charging-dock connectivity, low active power, and enough Flash for sensor-fusion firmware. Its 10-bit DAC can drive haptic feedback or a piezo buzzer, while the SERCOM I2C channels interface to heart-rate, IMU, and pressure sensors. The SleepWalking peripheral event system lets the ADC wake the core only when a threshold is crossed, extending coin-cell life. The 64-pin TQFP also supports fine-pitch flex-PCB breakout to sub-system modules.
推荐
Consumer Toys and Hobby Electronics
For Arduino-compatible maker boards and educational kits, the ATSAMD21J17D-AFT matches the popular Adafruit Feather M0 and Arduino Zero pin mapping in the TQFP-64 form factor, giving developers a familiar 48 MHz Cortex-M0+ with native USB. The 128 KB Flash supports sketches plus a UF2 bootloader, and 16 KB SRAM is enough for graphics buffers in small TFT applications. Hobbyists benefit from the SERCOM flexibility to drive WS2812 LEDs over SPI or DMX over UART without extra peripherals.
推荐
推荐产品汇总
工程参考数据： ATSAMD21J17D-AFT ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ATSAMD21J17D-AU | ATSAMD21J17A-AF | ATSAMD21J17A-AUT | ATSAMD21J18A-AFT | ATSAMD21J16B-AF |
|---|---|---|---|---|---|---|
| Package | 64-pin TQFP (10x10 mm) | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | Cortex-M0+ 48 MHz | Cortex-M0+ 48 MHz | Cortex-M0+ 48 MHz | Cortex-M0+ 48 MHz | Cortex-M0+ 48 MHz | Cortex-M0+ 48 MHz |
| Flash | 128 KB | 128 KB | 128 KB | 128 KB | 256 KB | 64 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB | 32 KB | 8 KB |
| USB | USB 2.0 FS Device | USB 2.0 FS Device | USB 2.0 FS Device | USB 2.0 FS Device | USB 2.0 FS Device | USB 2.0 FS Device |
| Operating Temperature | -40 C to +125 C | -40 C to +85 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C |
| SERCOM Channels | Up to 6 | Up to 6 | Up to 6 | Up to 6 | Up to 6 | Up to 6 |
关键差异点
- Higher operating temperature than the industrial-grade sibling （对比 ATSAMD21J17D-AU)
- Larger Flash than the J16 sibling without changing footprint （对比 ATSAMD21J16B-AF)
- Smaller memory than the J18 upgrade, but lower cost for code-fitting designs （对比 ATSAMD21J18A-AFT)
设计说明
Decouple VDD and VDDIO with a 1 µF bulk plus 0.1 µF ceramic placed within 5 mm of the supply pins; add a 10 µF bulk on the USB VBUS pin when bus-powered. The ATSAMD21J17D-AFT draws roughly 7 mA active at 48 MHz with all peripherals enabled; sleep currents drop below 5 µA in STANDBY with RTC retention. Power-rail sequencing between VDD and VDDIO is not required, but the brown-out detector should be enabled in production firmware to recover cleanly from supply drops below 1.62 V.
Route the USB D+ and D- traces as a 90 ohm differential pair with continuous ground reference and length matching within 150 mil. Keep the crystal traces short and symmetric, and place the load capacitors within 2 mm of the XIN/XOUT pins. The TQFP-64 thermal pad should be soldered to a continuous ground pour to lower thermal resistance; the junction-to-ambient theta_JA is approximately 50 C/W with a moderate copper area.
Common pitfalls when bringing up the ATSAMD21J17D-AFT include: (1) forgetting that the SERCOM pad mapping must be configured through the I/O multiplexing matrix in software, so a peripheral that appears on PA08 in one design may move to PB10 in another; (2) assuming the DFLL will lock from any crystal - many designs need an external 32.768 kHz crystal for accurate USB clocking; (3) not programming the NVMUSER row to enable the bootloader, locking the part with a bricked image; (4) leaving the ERASE pin floating, which can trigger an unintended mass-erase during power-up.
合规信息
RoHS and lead-free status per Microchip product page and DigiKey listing. Not AEC-Q100 qualified - choose ATSAMx21 variants with -A suffix for automotive qualification status. Halogen-free status not stated in the verified web data.
