ATTINY11-6PI 8-Bit AVR 6MHz 1KB Microcontroller | Microchip
料号: ATTINY11-6PI ✗ 停产ATTINY11-6PI 概述
An 8-bit microcontroller is a programmable semiconductor that executes instructions from embedded Flash memory and controls system inputs and outputs through a small set of I/O pins. The ATTINY11 family belongs to the AVR microcontroller family, within the broader embedded-processing and semiconductor hierarchy. Compared with larger microcontrollers, its 1KB Flash capacity favors simple control loops, fixed-function controllers, compact timers, and basic serial or logic-based interfaces rather than graphics, complex connectivity, or large data processing.
The ATTINY11-6PI combines three defining attributes: 8-bit processing, 6 MHz operation, and 1KB of Flash memory. The 512 x 16 organization in the distributor description indicates the internal Flash word arrangement used by the device. Its PDIP package provides an 8-pin through-hole format, making it useful for prototypes, educational systems, and designs assembled with conventional DIP sockets or through-hole assembly methods. The suffix identifies the temperature and packaging configuration used by the selected orderable part.
The part is listed as obsolete in the cross-reference information. This lifecycle status makes it important to distinguish archival documentation from current procurement availability. Engineers evaluating a new design should review the current Microchip product and documentation resources, while engineers maintaining existing equipment should verify the exact suffix, pinout, clock requirements, memory map, and supply route before committing a replacement or redesign.
Typical uses include small industrial control modules, simple sensor interfaces, compact timer or pulse-generation circuits, LED status and indicator controls, educational microcontroller trainers, and low-complexity embedded products. Because the public listing confirms the processor size, clock speed, memory capacity, voltage, and package, design decisions should remain conservative. Confirm pin multiplexing, electrical limits, reset behavior, clocking, and programming procedures in the manufacturer datasheet before releasing a board.
The most important design consideration is lifecycle and availability. This page supports exact-part identification and comparison of documented ATtiny11-family options, but it does not imply that ATTINY11-6PI is suitable for a new production program. For an existing PCB, retain the original suffix unless the replacement has been verified electrically, mechanically, and operationally. For a new design, compare current Microchip microcontrollers by memory, package, clock, tool compatibility, and long-term availability.
This product record combines the exact ATTINY11-6PI ordering code with its documented architecture and package identity, verified distributor listings, lifecycle information, pinout guidance, application context, and engineering selection notes. It is intended to accelerate identification and sourcing while keeping design decisions grounded in the manufacturer documentation.
直接替换替代料: ATTINY11-6PI ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
ATTINY11-6PU
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
ATTINY11-6PI 最大额定值与电气特性
| Product Type | 8-bit microcontroller |
| Microcontroller Family | AVR ATtiny |
| Architecture | AVR RISC |
| Core Processor | AVR |
| Core Size | 8-bit |
| Maximum Clock Speed | 6 MHz |
| Flash Memory Size | 1 KB |
| Flash Organization | 512 x 16 |
| Operating Voltage | 5 V |
| 封装 | 8-pin PDIP |
| 安装方式 | Through-hole |
| Package Pin Count | 8 |
| Product Status | Obsolete |
| Manufacturer | Microchip Technology |
| Original Manufacturer | Atmel Corporation |
ATTINY11-6PI 8 引脚配置指南
ATTINY11-6PI(8 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: ATTINY11-6PI.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATTINY11-6PI 适用于 6 应用s: Legacy Industrial Timer Control, Simple Sensor Signal Conditioning, LED Indicator and Pulse Generator, Educational Microcontroller Trainer, Compact Appliance Control Module, Legacy Peripheral Control Board.
Legacy Industrial Timer Control
The ATTINY11-6PI can serve as the fixed-function controller in a legacy timer or sequence-control board that already uses its 8-pin PDIP footprint. Its 6 MHz AVR core provides straightforward execution of timing and state-machine firmware, while 1KB of Flash is appropriate for compact logic rather than complex diagnostics. The principal design constraint is obsolescence: engineers should preserve the exact MCU where possible, confirm that existing firmware fits the 1KB program area, and qualify any replacement for reset, I/O, and timing behavior before production use.
推荐
Simple Sensor Signal Conditioning
For a small legacy sensor interface, the ATTINY11-6PI can read discrete inputs, apply threshold logic, and operate an indicator or simple output stage. The 8-bit architecture and 6 MHz operating speed are sufficient for basic digital conditioning, and the 1KB Flash limit encourages compact, deterministic firmware. Because no SRAM, EEPROM, or peripheral quantities are established here, the engineer must confirm memory and peripheral requirements in the datasheet and schematic before assigning analog, communication, or retention functions.
推荐
LED Indicator and Pulse Generator
The ATTINY11-6PI is appropriate for compact indicator, blink, and pulse-generation circuits built around the original 8-pin PDIP design. Firmware can use timer-based counting or simple port manipulation to produce repeatable LED patterns without a larger control system. The 6 MHz AVR processing rate supports deterministic lightweight tasks, and the 8-pin package simplifies through-hole prototyping. Production users should treat the obsolete status as a supply risk and validate replacement timing behavior if the MCU or oscillator configuration changes.
推荐
Educational Microcontroller Trainer
The inexpensive, low-pin-count ATTINY11-6PI can be used in educational demonstrations that teach embedded instruction execution, port control, reset operation, and basic programming. Its 8-bit AVR RISC architecture and 6 MHz clock make program flow easy to inspect, while 1KB of Flash supports short laboratory examples. Because the MCU is obsolete and has limited program memory, exercises should remain simple and should avoid assuming RAM, EEPROM, or advanced peripherals beyond those confirmed in the datasheet.
推荐
Compact Appliance Control Module
The ATTINY11-6PI can implement basic appliance control functions such as button decoding, mode sequencing, relay timing, and status indication in a compact through-hole design. Its 1KB Flash program space is suitable for a tightly scoped state machine, and the 6 MHz AVR core provides adequate timing margin for non-graphics tasks. For new appliance platforms, compare modern current-status MCUs with more memory and qualification options; for legacy repairs, confirm that the replacement MCU retains the same startup and I/O behavior.
推荐
Legacy Peripheral Control Board
The ATTINY11-6PI is useful in small legacy boards that coordinate a limited number of discrete peripherals through an 8-bit I/O interface. The 6 MHz AVR execution rate is ample for simple command decoding, and the PDIP format supports socketed prototypes and field repair. Because peripheral multiplexing and electrical limits are not fully established in the product listing, the implementation must follow the exact manufacturer pin table. Obsolete-part risk should be addressed through careful approved sourcing or a board-level redesign.
推荐
推荐产品汇总
工程参考数据: ATTINY11-6PI ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 8-pin PDIP |
| Brand | Microchip Technology |
| Core Size | 8-bit |
| Maximum Clock Speed | 6 MHz |
| — | 1 KB |
| Flash Organization | 512 x 16 |
| Operating Voltage | 5 V |
| Core Processor | AVR |
| Architecture | AVR RISC |
| Lifecycle Status | Obsolete |
关键差异点
- Exact legacy-system identity (对比 ATTINY11-6SI)
- Through-hole serviceability (对比 ATTINY11-6SC)
- Defined legacy resource envelope (对比 ATTINY102F-SSFR)
设计说明
Do not substitute an 8-pin SOIC or SMD MCU solely because the pin count is identical. ATTINY11-6PI uses an 8-pin PDIP footprint, while the available ATTINY11-6SI and ATTINY11-6SC comparison records identify SOIC packages. A package change alters the PCB land pattern, lead pitch, assembly method, and thermal behavior. Verify the exact physical package and pin function before approving any alternate ordering code.
Keep the power rail at the documented 5 V operating condition and follow the manufacturer’s absolute-maximum and decoupling guidance. Because the complete electrical-characteristics table is not reproduced on this page, do not infer the permissible input range from the nominal 5 V listing. Place the required supply bypass capacitor close to the device and confirm ground-return paths against the manufacturer application information before energizing the board.
Treat the original 8-pin PDIP footprint as the mechanical baseline, including the manufacturer-specified row spacing and pin numbering. Because the complete public pin-description table is not reproduced here, use the manufacturer datasheet when assigning VDD, GND, reset, clock, programming, and I/O signals. Check every track against the socket or connector orientation; reversing a DIP device during maintenance can connect power or programming signals incorrectly.
Plan firmware for the documented 1KB Flash limit and confirm actual RAM and EEPROM requirements in the manufacturer datasheet. A replacement that appears equivalent by clock speed may still provide a different memory map or startup behavior. For maintenance programs, preserve the original firmware image and validate reset, port states, and timing before releasing a new board revision.
合规信息
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is identified for ATTINY11-6PI. Confirm current compliance documentation with the manufacturer or the authorized sourcing organization before procurement.