ATXMEGA16E5-AUR - 32MHz 16KB Flash MCU | Microchip
料号: ATXMEGA16E5-AUR ✓ 量产中ATXMEGA16E5-AUR 概述
An 8/16-bit microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The XMEGA E5 family combines an AVR enhanced RISC architecture, event-system hardware, programmable interrupt levels, and serial interfaces in the broader category of embedded microcontrollers. Its deterministic event handling and 32 MHz performance make it suitable for compact control systems that need more responsiveness than a basic 8-bit architecture.
The ATXMEGA16E5-AUR provides 16 KB of ISP flash with read-while-write capability, including a 4 KB boot-code section. It also includes 512 bytes of EEPROM and 2 KB of SRAM. The eight-channel event system can connect peripherals directly to interrupt and pin-handling functions, reducing CPU intervention for timing-sensitive events. A programmable multi-level interrupt controller supports prioritized handling of concurrent internal and external events.
The E5 family emphasizes low-power operation and peripheral integration. Its 32 MHz operating rate supports deterministic control and efficient event processing, while the bootloader provides a dedicated path for firmware updates. The operating voltage range is 1.6 V to 3.6 V, enabling use in low-voltage industrial, consumer, communications, and embedded-control products where board space and power consumption are important constraints.
Typical applications include industrial sensor nodes, building-control modules, compact data-acquisition units, communication equipment, consumer accessories, and low-power embedded controllers. The device is particularly suitable when firmware requires moderate program memory, fast interrupt handling, and multiple peripherals without relying on an external memory interface.
PCB design should preserve the manufacturer's recommended decoupling and analog-supply layout around the 32-pin TQFP. Confirm clock, programming, reset, and serial-interface connections against the pin-description table in the manufacturer datasheet before layout release. The -AUR ordering code identifies the tape-and-reel industrial-temperature variant, so production quantities should follow that package-specific ordering definition.
This page organizes the device's memory capacity, clock rate, package, ordering information, sourcing options, and application guidance. It also identifies the limits of a true drop-in replacement: alternatives must retain the same 32-pin footprint, 32 MHz architecture family, and relevant memory and peripheral characteristics rather than merely sharing a similar price or function.
直接替换替代料: ATXMEGA16E5-AUR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ATXMEGA16E5-AUR (相同外形与封装尺寸) ——差异在于 Package, SRAM, Temperature Grade, EEPROM, Product Type.
ATXMEGA16E5-AU
✅ 直接替换联系询价
查看数据手册 →ATXMEGA16E5-ANR
✅ 直接替换联系询价
查看数据手册 →ATXMEGA16E5-AUR 最大额定值与电气特性
| Product Type | 8/16-bit RISC Microcontroller |
| Series | AVR XMEGA E5 |
| 最大时钟频率 | 32 MHz |
| Flash Memory | 16 KB (8K x 16) |
| Boot Code Section | 4 KB |
| EEPROM | 512 bytes |
| SRAM | 2 KB |
| Event System Channels | 8 channels |
| Operating Voltage Range | 1.6 V to 3.6 V |
| Architecture | AVR enhanced RISC |
| Core Width | 8/16-bit |
| 封装 | 32-pin TQFP, 7 x 7 mm |
| 安装类型 | Surface mount |
| Programming Interface | ISP |
| Flash Read-While-Write | Supported |
| Interrupt Controller | Programmable multi-level interrupt controller |
| Temperature Grade | Industrial temperature |
| Order Code Environmental Indicator | Green |
ATXMEGA16E5-AUR 32-pin tqfp, 7 x 7 mm 引脚配置指南
ATXMEGA16E5-AUR(32-pin tqfp, 7 x 7 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: ATXMEGA16E5-AUR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATXMEGA16E5-AUR 适用于 6 应用s: Industrial Sensor Node, Building Control Module, Compact Data-Acquisition Unit, Communication Equipment Controller, Low-Power Embedded Control, Consumer Accessory Controller.
Industrial Sensor Node
The ATXMEGA16E5-AUR fits compact industrial sensor nodes that periodically acquire measurements, apply local filtering, and report results over a serial link. Its 32 MHz enhanced RISC core provides processing headroom, while the eight-channel event system can coordinate timers, sensor events, and communication without relying entirely on polling loops. The 16 KB flash and 2 KB SRAM are sufficient for focused control firmware, and the 1.6 V to 3.6 V operating range supports low-voltage industrial rails. Designers should use the recommended decoupling and keep sensitive analog routing away from fast switching nodes.
推荐
Building Control Module
The ATXMEGA16E5-AUR is appropriate for building-control modules coordinating inputs, outputs, timers, and serial communications in a compact controller. The programmable multi-level interrupt controller helps prioritize events, while the event system can connect multiple peripheral events to interrupt handling and pin outputs with less CPU overhead. A 16 KB flash budget supports a focused control application with a separate 4 KB boot section for update-oriented code. The industrial-temperature suffix should be checked against the installation environment and manufacturing specification before release.
推荐
Compact Data-Acquisition Unit
ATXMEGA16E5-AUR can serve as the control core of a compact data-acquisition unit when the design needs deterministic sampling coordination, local buffering, and event-driven control. Its eight-channel event system is useful for linking timers with acquisition and communication functions, while 2 KB of SRAM provides space for working variables and modest data staging. The 32 MHz core supports responsive control calculations, and the 512-byte EEPROM can retain configuration parameters. Exact ADC, timer, and interface availability must be confirmed through the device pin table and peripheral matrix.
推荐
Communication Equipment Controller
The ATXMEGA16E5-AUR is well suited to protocol-handling and auxiliary-control tasks in compact communication equipment. Its 32 MHz core and multi-level interrupt architecture support responsive service routines, while the event system can coordinate input changes, timers, and output signals across multiple serial peripherals. The 16 KB program memory and 2 KB SRAM fit streamlined protocol stacks and control logic. Board-level implementation should reserve the required programming pins, maintain defined reset behavior, and follow the manufacturer's recommended layout for decoupling and clock routing.
推荐
Low-Power Embedded Control
The ATXMEGA16E5-AUR supports low-power embedded-control designs because the E5 architecture combines event-driven peripherals with a 1.6 V minimum operating voltage. A designer can use low-frequency clocking and sleep modes for duty-cycled operation while the event system handles selected peripheral activity without continuous CPU polling. The 2 KB SRAM supports compact working sets, and the 16 KB flash is practical for focused tasks. Energy consumption must be measured with the actual clock, sensor, and communications configuration because it depends on firmware and board behavior rather than a single catalog rating.
推荐
Consumer Accessory Controller
ATXMEGA16E5-AUR can manage compact consumer accessories that combine buttons, indicators, sensors, and serial connectivity. Its 32 MHz processor provides responsive control for debouncing, state management, and communication, while the event system can connect peripheral events to interrupt handling. The 16 KB flash and 2 KB SRAM fit accessory firmware without requiring external memory, and the 32-pin TQFP permits a relatively compact board layout. Firmware should use the bootloader and ISP interfaces appropriately, and production hardware must follow the exact package drawing and pin definitions.
推荐
推荐产品汇总
工程参考数据: ATXMEGA16E5-AUR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ATXMEGA16E5-AU | ATXMEGA16E5-ANR |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 32-pin TQFP (7 x 7 mm) | 32-pin TQFP (7 x 7 mm) | 32-pin TQFP (7 x 7 mm) |
| CPU Architecture | AVR enhanced RISC, 8/16-bit | AVR enhanced RISC, 8/16-bit | AVR enhanced RISC, 8/16-bit |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 16 KB | 16 KB | 16 KB |
| SRAM | 2 KB | 2 KB | 2 KB |
| EEPROM | 512 bytes | 512 bytes | 512 bytes |
| Operating Voltage Range | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
| Event System | 8 channels | 8 channels | 8 channels |
| Boot Code Section | 4 KB | 4 KB | 4 KB |
关键差异点
- Identical core memory configuration within the ATxmega16E5 family (对比 ATXMEGA16E5-AU)
- Event-driven control with eight hardware channels (对比 ATXMEGA16E5-ANR)
- Broad low-voltage operating range (对比 ATXMEGA16E5-AU)
- Dedicated boot and update-oriented memory organization (对比 ATXMEGA16E5-ANR)
设计说明
Assign every net from the 32-pin package table in Microchip datasheet DS40002059A, especially alternate-function pins and programming signals. Preserve the exposed clearance and solder-mask geometry defined for the TQFP land pattern, and route high-speed or sensitive analog signals away from the processor supply return path. Because alternate functions can differ among family members, a schematic copied from another XMEGA device must be checked against the exact ATXMEGA16E5-AUR pinout.
Estimated: at a 3.3 V supply and 15 mA average operating current, the supply power is 49.5 mW before peripheral and board losses. The power draw can change substantially with clock frequency, flash activity, active peripherals, and sleep modes, so this calculation is only a design starting point. Follow the decoupling values and power-pin connection diagram in the manufacturer datasheet, and measure current across normal, idle, and low-power operating states.
Do not treat ATXMEGA16E5-AUR, ATXMEGA16E5-AU, and ATXMEGA16E5-ANR as interchangeable solely because they use the same family footprint. Verify the ordering-code temperature grade, packing method, qualification requirements, and production reel configuration. Also ensure the firmware's device signature and startup assumptions match the exact MCU. A final review against the manufacturer's ordering guide should occur before a PCB revision is released.
Place required decoupling capacitors adjacent to the associated power pins and provide a low-impedance ground return for the device. Keep crystal or external-clock routing short and maintain isolation from high-current switching nodes. For designs using the eight-channel event system with precise timing, review clock jitter and interrupt-latency assumptions in the application rather than treating event routing as a substitute for a complete timing budget.
合规信息
The industrial-temperature designation and green ordering code are identified by the manufacturer or distributor information, but specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the applicable compliance documentation.