ATXMEGA64B1-AN - 32MHz 64KB Flash AVR XMEGA MCU | Microchip
料号: ATXMEGA64B1-AN ✓ 量产中ATXMEGA64B1-AN 概述
An XMEGA microcontroller combines an AVR CPU with a highly integrated event system, direct memory access, multi-level interrupts, and numerous hardware peripherals. The ATXMEGA64B1 specifically provides a two-channel DMA controller, a four-channel event system, 53 general-purpose I/O lines, a real-time counter, and an LCD controller capable of driving up to a 4 x 40 segment display. It also includes a full-speed USB device interface.
The device provides 64 KB of in-system programmable flash with read-while-write capability and an 8 KB boot-code section. Its 8 KB SRAM supports buffered communication, event-driven data acquisition, and protocol processing, while 2 KB of EEPROM provides nonvolatile storage for calibration data, configuration parameters, and serial numbers. These resources are suitable for connected control panels, compact industrial controllers, and USB-connected measurement products.
The XMEGA architecture places peripherals on an event system rather than relying only on software polling. Signals generated by timers, analog comparators, and other peripherals can be routed to DMA channels and interrupt resources, reducing CPU intervention in time-critical tasks. The two-channel DMA controller is especially useful for transferring ADC results, display data, or communications buffers while the CPU executes other tasks.
Typical applications include utility metering, home automation, climate control, industrial control, sports equipment, USB connectivity, power tools, medical equipment, toys, eTokens, and fire-alarm systems. The 100-pin TQFP package exposes the LCD, USB, analog, timer, communications, and general-purpose I/O resources needed by these multi-function designs.
PCB design should preserve USB trace geometry, provide adequate decoupling at the supply pins, and route high-speed or sensitive analog signals away from switching nodes. Confirm the device pin functions and alternate peripheral mappings in the manufacturer datasheet before assigning PCB nets, particularly for LCD segments, USB differential pairs, and pins with multiple peripheral functions.
直接替换替代料: ATXMEGA64B1-AN ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
ATXMEGA64B1-AUR
✅ 直接替换联系询价
查看数据手册 →ATXMEGA64B1-ANR
✅ 直接替换📋 参考替代料(不在目录中)
ATXMEGA64B1-AN 最大额定值与电气特性
| Product Type | 8/16-bit AVR XMEGA microcontroller |
| Maximum Clock Speed | 32 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 32K x 16 |
| Boot Code Section | 8 KB |
| SRAM | 8 KB |
| EEPROM | 2 KB |
| Supply Voltage Range | 1.6 V to 3.6 V |
| Maximum Operating Temperature | 105 °C |
| General-Purpose I/O Lines | 53 |
| DMA Channels | 2 |
| Event System Channels | 4 |
| LCD Segment Capability | Up to 4 x 40 segments |
| USB Interface | USB Full Speed Device |
| Real-Time Counter | Yes |
| 封装 | 100-pin TQFP, 14 mm x 14 mm |
| 安装类型 | Surface mount |
| Programmable Multilevel Interrupt Controller | Yes |
| Read-While-Write Flash | Yes |
ATXMEGA64B1-AN 100-pin tqfp, 14 mm x 14 mm 引脚配置指南
ATXMEGA64B1-AN(100-pin tqfp, 14 mm x 14 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: ATXMEGA64B1-AN.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATXMEGA64B1-AN 适用于 6 应用s: USB-Connected Data Logger, Utility Metering, Home Automation Controller, Climate Control Instrument, Segment-Display Control Panel, Battery-Powered Embedded Product.
USB-Connected Data Logger
The ATXMEGA64B1-AN fits a USB-connected logger because it combines a USB Full Speed Device interface with 64 KB flash, 8 KB SRAM, and 2 KB EEPROM. Firmware can collect sensor readings into SRAM, transfer blocks with the two-channel DMA controller, and store configuration or event records in EEPROM. Its 32 MHz performance supports protocol handling while the four-channel event system responds to timer and comparator events. Use the 1.6 V to 3.6 V supply range to design for both USB-powered and separately regulated installations.
推荐
Utility Metering
The ATXMEGA64B1-AN suits utility-metering designs that need deterministic peripheral routing and local data handling. The 53 general-purpose I/O lines support pulse inputs, status indicators, and meter-bus interfaces, while the real-time counter provides a dedicated timing resource. Its 8 KB SRAM can buffer measurement samples, and 2 KB of EEPROM can retain calibration constants. The event system and two DMA channels reduce CPU work during simultaneous sampling and display-refresh activity.
推荐
Home Automation Controller
The ATXMEGA64B1-AN can act as the central controller in a home-automation module that coordinates sensors, relays, lighting, and local user input. Its 53 I/O lines provide ample interfacing for digital inputs and outputs, while the four-channel event system supports immediate reaction to timer, comparator, or external events. The LCD controller can also drive a local segment display, and the USB interface enables configuration or firmware-service access without adding a separate communications controller.
推荐
Climate Control Instrument
The ATXMEGA64B1-AN is appropriate for climate-control instruments that combine sensing, a local display, and real-time control. The LCD driver supports displays of up to 4 x 40 segments, and 53 I/O lines leave capacity for sensors, buttons, alarm outputs, and communication ports. Timer and comparator signals can be routed through the event system, while DMA transfers data without unnecessary processor intervention. Its 32 MHz clock rate provides headroom for filtering, compensation, and control-loop computation.
推荐
Segment-Display Control Panel
The ATXMEGA64B1-AN supports compact control panels by combining its up-to-4 x 40-segment LCD controller with substantial GPIO and fast interrupt handling. Engineers can assign buttons, indicators, encoders, and status lines while the event system routes changes directly to interrupt and DMA resources. The 8 KB SRAM is useful for display buffers and menu state, and the 64 KB flash holds application firmware, interface tables, and graphics character definitions.
推荐
Battery-Powered Embedded Product
The ATXMEGA64B1-AN is suited to compact battery-powered products where memory, I/O, and communications must be integrated without external expansion chips. The 1.6 V minimum operating voltage supports low-voltage power systems, while 8 KB SRAM and 2 KB EEPROM provide working and configuration storage. The device can use its event system and DMA controller to reduce active processing time, and its USB interface provides a service path for configuration in prototypes, instruments, and connected maintenance tools.
推荐
推荐产品汇总
工程参考数据: ATXMEGA64B1-AN ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ATXMEGA64B1-AUR | ATXMEGA64B1-ANR |
|---|---|---|---|
| Manufacturer | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) - same | 100-pin TQFP (14 x 14 mm) - same |
| Maximum Clock Speed | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB |
| SRAM | 8 KB | 8 KB | 8 KB |
| EEPROM | 2 KB | 2 KB | 2 KB |
| Supply Voltage Range | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
| DMA Channels | 2 | 2 | 2 |
| Event System Channels | 4 | 4 | 4 |
| General-Purpose I/O Lines | 53 | 53 | 53 |
| USB Interface | USB Full Speed Device | USB Full Speed Device | USB Full Speed Device |
关键差异点
- Same 64 KB flash, 8 KB SRAM, and 2 KB EEPROM configuration across the verified ATxmega64B1 alternatives (对比 ATXMEGA64B1-AUR)
- Identical 100-pin TQFP land pattern for PCB reuse (对比 ATXMEGA64B1-ANR)
- Integrated event-driven control resources (对比 ATXMEGA64B1-AUR)
- Integrated display and USB connectivity (对比 ATXMEGA64B1-ANR)
设计说明
Follow the power-supply recommendations and decoupling network in the manufacturer datasheet when operating the ATXMEGA64B1-AN from its 1.6 V to 3.6 V range. Place the required bulk and high-frequency decoupling capacitors close to their designated supply pins, and keep analog and digital return paths within the recommended grounding arrangement. Verify maximum supply ramp behavior before relying on brownout or reset sequencing.
Assign PCB nets directly from the complete ATxmega64B1 pin-description table because the 100-pin TQFP exposes many multiplexed functions. Preserve the USB differential-pair geometry and keep the associated return path continuous. Route the LCD segment outputs away from sensitive analog inputs, and check that every selected peripheral alternate function is available on the chosen pin before finalizing the schematic.
Use the event system, DMA, and real-time counter to establish predictable timing between sampling, conversion, and data transfer. The two DMA channels can move peripheral data with less processor involvement, but their routing options must be confirmed in the device documentation. Add adequate settling time at analog sources and keep fast digital edges away from high-impedance sensor inputs to reduce coupling into measurement channels.
Do not interchange ATxmega64B1 order codes based on the suffix alone. ATXMEGA64B1-AUR and ATXMEGA64B1-ANR retain the same core device and 100-pin TQFP footprint, but temperature-grade and packing requirements must match the production process. Confirm the assembly method, moisture-sensitivity handling, operating-temperature grade, and programmed-device requirements before releasing a substitution for ATXMEGA64B1-AN.
合规信息
Compliance attributes were not explicitly stated in the product listings. Confirm RoHS, REACH, halogen-free, conflict-minerals, and automotive-qualification status against the current manufacturer product page or declarations before release.