BCM56319A0KFEB - 24-Port Gigabit Ethernet Switch | Broadcom
料号: BCM56319A0KFEB ✓ 量产中BCM56319A0KFEB 概述
An Ethernet switch controller is a specialized semiconductor that connects multiple network endpoints, forwards frames according to programmed tables, and manages traffic between access ports and higher-bandwidth links. Within the networking hierarchy, this device belongs to Ethernet switch controllers, interface ICs, and integrated network semiconductors. Its 24 Gigabit Ethernet ports provide one-gigabit service access, while the four 10 Gigabit Ethernet interfaces address bandwidth-intensive aggregation or uplink traffic.
The principal architectural advantage is the combination of broad port density and four 10G interfaces in one device. This can simplify a multiport switch design by consolidating Layer 2 switching and high-speed uplink functions. It is particularly useful when the end product needs more than the port count of a basic unmanaged switch but does not require a separate fabric device for each uplink. Exact protocol, clock, power, and package details should be confirmed from the manufacturer datasheet before schematic capture.
Broadcom BCM56319A0KFEB is identified in distributor records as a 24-port Gigabit Ethernet and four-port 10G Layer 2 switch controller. This places it in applications where access traffic is aggregated toward data-center, industrial, or enterprise uplinks. The combination can reduce board-level switching complexity, although software configuration, thermal management, and compliance testing remain important parts of the final design.
Typical uses include managed enterprise access switches, industrial Ethernet equipment, carrier access systems, network appliances, and high-port-count embedded platforms. In these systems, the controller can provide front-panel Gigabit Ethernet connectivity while the four 10G interfaces support upstream links, stacking or backplane traffic, and other high-bandwidth paths. Designers must confirm whether every interface is exposed externally or configured internally for the target product.
A primary design consideration is that controller selection depends on more than nominal port count. PHY support, clocking, reference designs, firmware requirements, thermal performance, and exact lead-free package documentation determine whether the device can be implemented without additional circuitry or redesign. Follow the Broadcom reference design and evaluation platform for power sequencing, interface bring-up, thermal layout, and regulatory validation.
This product record combines the manufacturer-defined switch configuration with structured technical guidance, sourcing pathways, and verification-focused comparisons. It highlights what can be confirmed for BCM56319A0KFEB while directing engineers to the manufacturer documentation for implementation details that must match the exact ordering code and board architecture.
直接替换替代料: BCM56319A0KFEB ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: BCM56319A0KFEB (相同外形与封装尺寸) ——差异在于 Switching Layer.
BCM56319A0IFEB
✅ 直接替换📋 参考替代料(不在目录中)
BCM56319A0KFEBG
✅ 直接替换📋 参考替代料(不在目录中)
BCM56319A0KFEB 最大额定值与电气特性
| Product Type | Layer 2 Ethernet switch controller |
| Gigabit Ethernet Port Count | 24 ports |
| 10 Gigabit Ethernet Interface Count | 4 interfaces |
| Switching Layer | Layer 2 |
| Access Port Rate | 1 Gb/s per Gigabit Ethernet port |
| Uplink Interface Rate | 10 Gb/s per 10 Gigabit Ethernet interface |
| Manufacturer | Broadcom Limited |
| Product Category | Interface ICs |
| Ethernet Switching Function | 24-port Gigabit Ethernet with 4x10G Layer 2 switching |
BCM56319A0KFEB standard 引脚配置指南
BCM56319A0KFEB(standard 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: BCM56319A0KFEB.
请参阅 数据手册 以查看完整引脚配置。
典型应用
BCM56319A0KFEB 适用于 6 应用s: Managed Enterprise Access Switch, Industrial Ethernet Aggregation, Carrier Access and CPE Equipment, High-Density Network Appliance, Video and Surveillance Network Gateway, Industrial IoT Edge Gateway.
Managed Enterprise Access Switch
The Broadcom BCM56319A0KFEB fits a managed enterprise access switch because it combines 24 Gigabit Ethernet ports with four 10 Gigabit Ethernet interfaces in one Layer 2 controller. The 1 Gb/s access ports can serve workstations, phones, printers, and other endpoint connections, while the 10G interfaces provide high-capacity uplinks to distribution or aggregation equipment. This combination reduces the number of switching devices required in a high-port chassis. Implementation must align PHY selection, management firmware, clocking, and thermal design with the Broadcom reference design, and the four high-speed interfaces must be assigned according to the product's backplane or uplink requirements.
推荐
Industrial Ethernet Aggregation
BCM56319A0KFEB is suitable for industrial Ethernet aggregation equipment that must support many 1 Gb/s field-device connections while preserving higher-speed paths toward plant-level equipment. The 24 Gigabit Ethernet ports accommodate sensors, controllers, programmable systems, and industrial PCs, and the four 10 Gigabit Ethernet interfaces can carry aggregated traffic. Industrial use requires confirmation of the exact temperature grade, isolation strategy, PHY selection, surge requirements, and functional-safety implications. Use the Broadcom evaluation platform to validate startup, clocking, port behavior, and thermal performance in the target enclosure before production release.
推荐
Carrier Access and CPE Equipment
The 24-port Gigabit Ethernet capability of BCM56319A0KFEB makes it relevant to carrier access equipment and customer-premises systems with numerous wired service endpoints. Four 10G interfaces support high-volume traffic toward access-network aggregation, internal fabric, or uplink modules. A carrier-grade implementation should verify environmental grade, software image support, management security, synchronization requirements, and compliance obligations with the manufacturer. The exact package and thermal limits also determine whether the controller fits the enclosure and available board area, so schematic and layout work should follow the Broadcom evaluation design rather than relying on a generic Ethernet switch schematic.
推荐
High-Density Network Appliance
BCM56319A0KFEB can serve as the switching element in a high-density network appliance that exposes many Gigabit Ethernet service ports and a smaller number of faster trunk interfaces. Consolidating 24 access ports and four 10G links in one controller supports compact products with substantial aggregate throughput. The implementation must address power sequencing, high-speed SerDes routing, PHY integration or external connectivity, clock jitter, and enclosure cooling. Because Ethernet port rates alone do not define forwarding performance, designers should confirm switch fabric throughput and internal timing from the manufacturer documentation before committing to a system topology.
推荐
Video and Surveillance Network Gateway
The Broadcom BCM56319A0KFEB is applicable to a surveillance gateway or video-network aggregation platform because 24 Gigabit Ethernet ports can connect cameras, encoders, and recording nodes while four 10G interfaces carry consolidated traffic toward storage or core networking. Deterministic forwarding behavior and isolated management features are important in these systems. The selected PHY must support the required cable reach and interface timing, while the design should provide clocking, isolation, power budget, and thermal margins for continuous operation. Verify multicast handling, QoS behavior, and management security against the Broadcom feature documentation for the exact ordering code.
推荐
Industrial IoT Edge Gateway
BCM56319A0KFEB fits an industrial IoT edge gateway that needs many local Ethernet endpoints and high-speed links to a controller, server, or cloud gateway. The 24 Gigabit Ethernet ports can connect machines, sensors, vision systems, and service equipment, while the four 10G interfaces support local processing clusters or uplink trunks. Industrial gateways benefit from centralized Layer 2 handling, but deployment quality depends on validated PHYs, watchdog behavior, firmware lifecycle, EMC design, and thermal margins. Use the manufacturer evaluation hardware to prove port interoperability and startup behavior across the supported voltage and temperature conditions before volume production.
推荐
推荐产品汇总
工程参考数据: BCM56319A0KFEB ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | BCM56319A0IFEB | BCM56319A0KFEBG |
|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom |
| Package | BGA | BGA - exact package drawing must be confirmed | BGA - exact package drawing must be confirmed |
| Gigabit Ethernet Ports | 24 ports | 24 ports in the identified BCM56319 family | 24 ports in the identified BCM56319 family |
| 10 Gigabit Ethernet Interfaces | 4 interfaces | 4 interfaces in the identified BCM56319 family | 4 interfaces in the identified BCM56319 family |
| Access Port Rate | 1 Gb/s per Gigabit Ethernet port | 1 Gb/s per Gigabit Ethernet port | 1 Gb/s per Gigabit Ethernet port |
| Uplink Interface Rate | 10 Gb/s per 10 Gigabit Ethernet interface | 10 Gb/s per 10 Gigabit Ethernet interface | 10 Gb/s per 10 Gigabit Ethernet interface |
关键差异点
- High access-port density combined with four 10G interfaces (对比 BCM56319A0IFEB)
- Integrated Layer 2 access and uplink consolidation (对比 BCM56319A0KFEBG)
- Target ordering code identified by the manufacturer product listings (对比 BCM56319A0IFEB)
设计说明
Route all 10 Gigabit Ethernet SerDes and reference-clock connections on the Broadcom evaluation-board layer stack, with controlled impedance, continuous reference planes, and no uncontrolled stubs. The 24 Gigabit Ethernet ports add a large number of high-speed copper links; PHY placement, connector escape routing, and return-path continuity can dominate signal-integrity performance. Check the manufacturer layout stack-up and keepout rules before duplicating the reference design in the production PCB.
Use the manufacturer power-tree and sequencing requirements for every BCM56319A0KFEB supply rail, including the exact voltage, tolerance, ramp-time, and decoupling configuration. Ethernet controllers combine digital logic with high-speed SerDes and multiple PHY interfaces, so inadequate local decoupling or an uncontrolled supply ramp can affect startup and link training. Validate the final rail values and capacitor placement against the current Broadcom reference schematic rather than deriving them from a generic Ethernet-switch design.
Estimate junction-temperature rise from total controller and PHY dissipation using the exact package thermal model, copper area, airflow, and ambient temperature from the manufacturer documentation. A multiport Ethernet controller can operate continuously at high traffic loading, making nominal board temperature insufficient for thermal qualification. Provide thermal vias and copper under the package according to the recommended land pattern, then verify steady-state temperature in the sealed enclosure during worst-case traffic and elevated ambient conditions.
Do not treat BCM56319A0KFEB, BCM56319A0IFEB, or BCM56319A0KFEBG as interchangeable based only on the family name. Confirm the Broadcom ordering-code table, package ball map, temperature range, lifecycle status, firmware support, and production configuration before releasing a PCB or BOM change. The 24 Gigabit Ethernet and four 10G interface counts are confirmed for the target ordering code, but they do not by themselves establish electrical, environmental, or software equivalence.
合规信息
The available product listings identify the manufacturer and switching configuration but do not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm each declaration for the exact BCM56319A0KFEB ordering code with Broadcom.