BCM8742BKFBG - Quad 10GbE SFI-to-XAUI Interface | Broadcom
料号: BCM8742BKFBG ✗ 停产BCM8742BKFBG 概述
An interface transceiver IC is a semiconductor device that connects digital logic, line-card processing, and external high-speed serial channels. In this type of component, the transmitter and receiver circuitry handle serial signaling, while the XAUI and SFI interfaces provide defined connectivity to surrounding optical, copper, or digital subsystems. The BCM8742BKFBG is therefore suited to designs where multiple 10GbE channels must be integrated into a compact communication platform.
The BCM8742BKFBG is identified by Broadcom as a 10GbE SFI-to-XAUI PHY in distributor documentation. The quad-channel configuration allows engineers to consolidate four high-speed interface channels in one device, reducing the number of separate interface devices required in a multi-channel line card. This can simplify PCB planning when the system requires repeated SFI and XAUI conversions, although board-level performance still depends on the complete signal path and power architecture.
Typical deployment environments include telecom aggregation equipment, Ethernet switching platforms, optical transport systems, and industrial networking equipment. The device can be selected when a board design requires a dedicated quad 10GbE SFI-to-XAUI conversion function. Designers should verify the exact electrical characteristics, supply requirements, package dimensions, pin mapping, reference clocking, and signal-integrity requirements against the Broadcom documentation before releasing a production PCB.
The BCM8742BKFBG is best understood as a high-speed network interface component rather than a general-purpose transceiver. Its design target is 10GbE SFI-to-XAUI signal conversion, making it most relevant to equipment designers working with high-speed serial backplanes, optical modules, aggregation platforms, and carrier-grade networking systems. The device should be paired with power supplies, clocks, termination networks, and signal-integrity-controlled PCB layouts capable of supporting the required 10GbE channels.
直接替换替代料: BCM8742BKFBG ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料BCM8742BKFBG 最大额定值与电气特性
| Device Type | Telecom interface transceiver IC |
| Interface Function | SFI-to-XAUI conversion |
| Channel Count | 4 channels |
| Nominal Data Rate | 10 GbE per channel |
| Product Family | 10GbE SFI-to-XAUI PHY |
| Application Domain | Telecom and industrial networking |
| Signal Category | High-speed serial communication |
| Transmitter Function | SFI-to-XAUI signal conversion |
| Receiver Function | SFI-to-XAUI signal conversion |
BCM8742BKFBG standard 引脚配置指南
BCM8742BKFBG(standard 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: BCM8742BKFBG.
请参阅 数据手册 以查看完整引脚配置。
典型应用
BCM8742BKFBG 适用于 6 应用s: Telecom Aggregation Line Cards, 10GbE Optical Transport Equipment, Enterprise Ethernet Switching Platforms, Industrial Networking Gateways, High-Speed Network Processing Cards, Data Center Network Equipment.
Telecom Aggregation Line Cards
The BCM8742BKFBG fits telecom aggregation line cards that need several high-speed serial interface paths in one device. Its four-channel 10GbE SFI-to-XAUI architecture can consolidate repeated interface conversions within a compact line-card design. The part is positioned for equipment where XAUI connects into processing silicon and SFI connects toward optical or network-facing circuitry. Before schematic release, verify the exact package, pin map, power rails, reference clock, and lane timing requirements in the Broadcom documentation.
推荐
10GbE Optical Transport Equipment
The BCM8742BKFBG is suited to 10GbE optical transport platforms requiring repeated SFI-to-XAUI conversion. A transport board can use the quad-channel device to translate between high-speed XAUI-facing processing logic and SFI-facing optical or network paths. This can reduce component count compared with multiple single-channel interface arrangements. Signal-integrity validation remains essential because connector, package, reference-clock, and trace-layout details determine whether the 10GbE interfaces operate reliably in the finished system.
推荐
Enterprise Ethernet Switching Platforms
The BCM8742BKFBG can support enterprise switching equipment that uses SFI and XAUI links to move 10GbE traffic between line cards, backplanes, and optical interfaces. Its four-channel organization is useful when several high-speed links must terminate or originate on one board. Engineers should evaluate lane assignment, clock topology, thermal performance, and PCB signal integrity for the specific platform. The device should not be selected solely by data rate; complete interface and package compatibility must also be demonstrated.
推荐
Industrial Networking Gateways
The BCM8742BKFBG is applicable to industrial network gateways requiring several 10GbE conversion paths between line-card logic and external serial network channels. Its quad-channel SFI-to-XAUI function can support centralized processing in edge, transportation, and factory communication equipment. The finished system must satisfy its environmental and EMC requirements, so designers should complete thermal, power-integrity, and signal-integrity analysis while following the manufacturer’s reference layout and clocking guidance.
推荐
High-Speed Network Processing Cards
The BCM8742BKFBG can serve as a high-speed interface block on network-processing cards where XAUI carries data between packet-processing silicon and an external SFI path. Four-channel integration allows one board to support multiple 10GbE connections with a shared device footprint. Placement, decoupling, clock distribution, and high-speed trace routing must be planned together to limit insertion loss, jitter, crosstalk, and power-supply noise. The Broadcom reference documentation should guide board-layout and validation decisions.
推荐
Data Center Network Equipment
The BCM8742BKFBG is relevant to data-center network equipment that employs 10GbE SFI and XAUI links for aggregation, switching, or server-facing interfaces. Its four channels can support a denser interface arrangement while preserving a consistent high-speed PHY architecture. Designers should compare the device’s power and thermal requirements against system airflow, verify its operating limits, and implement controlled-length routing and return paths. Production qualification should include eye, jitter, and compliance testing on the complete channel.
推荐
推荐产品汇总
工程参考数据: BCM8742BKFBG ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Broadcom |
| Channel Count | 4 channels |
| Nominal Data Rate | 10 GbE per channel |
| Interface Function | SFI-to-XAUI |
| Product Type | Telecom interface transceiver IC |
关键差异点
- Four-channel high-speed interface integration (对比 No verified drop-in alternative)
- Purpose-built SFI-to-XAUI conversion (对比 Generic single-channel interface devices)
- Ten-gigabit-per-channel positioning (对比 Lower-rate multi-channel serial interfaces)
设计说明
Treat every SFI and XAUI channel as a controlled-impedance 10GbE signal path. Use the manufacturer’s pin, package, and reference-layout guidance to define trace geometry, layer transitions, return vias, and connector or device escape routing. Keep high-speed clocks away from sensitive input sections, minimize stubbing, and verify differential pair length and pair-to-pair skew against the complete-channel requirements.
Design the power-distribution network around the device’s confirmed voltage, current, sequencing, and decoupling requirements from the Broadcom documentation. Place required bypass capacitors at the associated supply pins with short, low-inductance connections, and provide clean return paths through the ground structure. Validate voltage at the pins across maximum load, clock, temperature, and startup conditions before production release.
Use the exact BCM8742BKFBG land pattern and pin mapping rather than a generic interface-IC footprint. Confirm courtyard clearance, exposed thermal features, solder-mask geometry, and assembly tolerances for the ordered package. Because the four high-speed channels share a device, review lane-to-lane spacing, clock distribution, test-point access, and the interaction between neighboring circuitry before releasing artwork.
Calculate board-level temperature rise from the actual channel loading, supply voltage, ambient temperature, and airflow. Compare the resulting junction temperature with the device’s specified limit and the enclosure temperature at the card inlet. For high-density switching or telecom systems, provide solid thermal vias and copper paths under any exposed pad, while avoiding thermally induced alignment problems with the high-speed layout.
合规信息
The available product listings do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these attributes with Broadcom before procurement.