ROHM Semiconductor

BD37523FS-E2 - 2-Band Audio Sound Processor | ROHM

料号: BD37523FS-E2 ✓ 量产中
7 V to 9.5 V Vdss 24-pin SSOP Package
最小起订量: 1 |

BD37523FS-E2 概述

ROHM BD37523FS-E2 is an analog audio sound processor with a built-in two-band equalizer, three audio input selectors, and four-channel independent volume and fader control. It operates from a 7 V to 9.5 V supply and is packaged in a 24-pin SSOP measuring 5.40 mm wide. The part combines source selection, tone adjustment, and independent level control within one audio signal-chain IC.

An audio sound processor is a functional block within the broader audio IC hierarchy. Unlike a power amplifier, it does not directly drive loudspeakers; instead, it selects an audio source and applies gain, attenuation, equalization, and fader functions before the signal reaches an amplifier. This integration reduces the number of discrete control paths and simplifies PCB layout in car audio, home audio, and portable sound systems.

The BD37523FS-E2's principal feature is its internal two-band equalizer, allowing bass and tone adjustment without external passive networks. Three input selectors support compatibility with three audio sources, while four independent volume and fader channels provide flexible routing and level control. I2C control indicated for the device enables software-oriented configuration rather than requiring a dedicated control interface for every adjustment.

The 7 V to 9.5 V operating range suits conventional positive supply rails found in many multi-rail audio systems. The 24-pin SSOP package supports conventional surface-mount assembly, while its narrow body helps conserve board area in compact consumer and automotive audio products. The manufacturer positions the BD37523FS family as supporting common control software to improve development efficiency across multiple models.

Typical uses include automotive head-unit source selection, compact stereo preamplifier boards, portable audio systems, and home-audio control panels. In each case, the IC can provide local volume and fader adjustment ahead of a power-amplifier stage. The integrated equalizer is especially useful when a design requires user-selectable bass and treble behavior without additional analog switch networks.

Designers should preserve adequate supply decoupling and verify the board-level pin mapping against the manufacturer datasheet before assigning control functions. Audio signal routing also requires attention to grounding and trace layout because the processor handles multiple source paths simultaneously. Confirming the exact control protocol, reset behavior, and supported operating mode in the current manufacturer documentation remains essential before firmware integration.

直接替换替代料: BD37523FS-E2 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

BD37523FS-E2 最大额定值与电气特性

Device Type Analog audio sound processor with built-in two-band equalizer
Supply Voltage Range 7 V to 9.5 V
Input Selector Count 3 inputs
Independent Volume and Fader Channels 4 channels
Equalizer Bands 2 bands
Equalizer Controls Bass and tone adjustment
Control Interface I2C
封装 24-pin SSOP
Package Width 5.40 mm
Package Length 0.213 inch
安装类型 Surface mount

BD37523FS-E2 0.213 inch 引脚配置指南

BD37523FS-E2(0.213 inch 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

BD37523FS-E2 的 0.213 inch 封装引脚图

暂无详细引脚数据: BD37523FS-E2.

请参阅 数据手册 以查看完整引脚配置。

典型应用

BD37523FS-E2 适用于 6 应用s: Automotive Head-Unit Source Control, Compact Stereo Preamplifier, Portable Audio System, Home Audio Control Panel, Multichannel Speaker Control, Sound Bar Input and Tone Control.

🚗

Automotive Head-Unit Source Control

The BD37523FS-E2 fits an automotive head-unit signal path where several source signals must be selected before a power-amplifier stage. Its three input selectors reduce the need for separate analog routing, while the built-in two-band equalizer permits bass and tone adjustment without an external passive equalizer. Four independent volume and fader channels can organize front and rear or grouped outputs according to the vehicle's audio architecture. The 7 V to 9.5 V operating range is compatible with conventional positive automotive audio rails, subject to transient protection and qualification requirements. Firmware can use I2C to control the processor, reducing the number of discrete user-interface controls on the front panel.

🎧

Compact Stereo Preamplifier

In a compact stereo preamplifier, the BD37523FS-E2 can combine source selection, bass and tone control, and independent level adjustment before the power amplifier. This integration allows a signal path to occupy less PCB area than a network of analog switches, potentiometer circuits, and discrete gain stages. Four independently controlled volume and fader channels provide flexibility for balancing two stereo zones or implementing grouped attenuators. The I2C interface suits modern products in which front-panel commands arrive from a host controller. Designers should still implement the manufacturer's recommended passive network, decoupling, grounding, and signal-routing arrangement to preserve channel symmetry and minimize switching noise.

📱

Portable Audio System

The BD37523FS-E2 can serve as the local audio-control block in a portable stereo or docking system that accepts multiple source inputs. Its three selectors allow source routing among the product's supported inputs, and the integrated two-band equalizer provides adjustable tonal balance for different listening conditions. Four independent volume and fader channels can support separate output groups without implementing four repeated discrete attenuator networks. The narrow 24-pin SSOP package is useful when board area is constrained. Because portable products may run from batteries, the complete supply architecture should provide a stable 7 V to 9.5 V rail and include protection appropriate to the product's ESD, surge, and connector requirements.

🏠

Home Audio Control Panel

The BD37523FS-E2 is appropriate for a home-audio control panel that combines source selection with user-adjustable tone and level. Three input selectors accommodate multiple analog sources, while the two-band equalizer allows bass and tone changes without external filter components. Four independent volume and fader channels can control main, zone, headphone, or grouped speaker-level paths ahead of external amplifiers. I2C control allows a system controller to apply settings from a front-panel encoder or remote-control receiver. Layout attention should be directed toward short analog traces, stable return paths, and separation from display or switching-power-supply nodes. The implementation should follow the reference circuitry and recommended values in the manufacturer datasheet.

🔊

Multichannel Speaker Control

A multichannel sound system can use the four independent volume and fader channels of the BD37523FS-E2 to organize multiple speaker-level outputs. The processor handles attenuation and channel-specific level control ahead of power amplifiers rather than directly driving speaker loads, which keeps its role within the audio preamplifier stage. Its three source selectors can also simplify switching among program sources in a fixed installation. The two-band equalizer provides a practical bass and tone adjustment layer for room and program matching. During system design, confirm maximum signal levels, recommended external component values, and channel-routing requirements against the datasheet, and ensure the downstream amplifiers have compatible input impedance and gain structure.

🎬

Sound Bar Input and Tone Control

The BD37523FS-E2 can organize analog source selection and tone control in a sound bar or compact cinema receiver. Three selectors allow local handling of multiple source inputs, while the built-in two-band equalizer supplies user adjustments for bass and treble without an external passive network. Four independent level channels can support main amplification, subwoofer feed, or grouped speaker paths if the downstream circuitry has compatible gain and impedance characteristics. The I2C interface enables integration with buttons, rotary controls, or a system processor. Placement near the source connectors can shorten sensitive audio routes, but decoupling and return-current paths should follow the manufacturer application circuit. Verify the final channel assignment against the 24-pin pin-description table.

What is the ROHM BD37523FS-E2?
The ROHM BD37523FS-E2 is an analog audio sound processor with a built-in two-band equalizer, three input selectors, four-channel independent volume and fader control, and I2C control. According to the ROHM product page, the device is intended to simplify source selection and audio tone adjustment. It is packaged in a 24-pin SSOP and operates from 7 V to 9.5 V.
What are the key specifications of BD37523FS-E2 that engineers should know?
The BD37523FS-E2 combines three audio input selectors, four independently controlled volume and fader channels, and a built-in two-band equalizer in one 24-pin SSOP. Its stated supply range is 7 V to 9.5 V, and the listed control interface is I2C. These functions place source routing, level adjustment, and bass or tone control ahead of an external power amplifier.
Where can I download the BD37523FS-E2 datasheet PDF?
The official BD37523FS-E2 documentation starts at the ROHM product page listed on this page, while an indexed PDF copy is also available from the datasheet archive. Use the manufacturer document for authoritative pin descriptions, electrical limits, control-register definitions, application circuits, and package dimensions. The external copy should be checked against the ROHM revision before it is used as the controlling design document.
Where can I find the BD37523FS-E2 pinout?
The BD37523FS-E2 pinout is shown in the manufacturer datasheet's pin-assignment and package-drawing sections. The component uses a 24-pin SSOP, so every PCB land pattern must be checked against all 24 numbered positions before layout release. Use the pin-description table when assigning supply, ground, audio, control, and control-interface functions; do not infer connections solely from the simplified package drawing.
Is the BD37523FS-E2 suitable for automotive audio systems?
The BD37523FS-E2 is functionally suitable for source selection, tone adjustment, and multi-channel level control in an automotive head unit, subject to qualification and operating-temperature checks. Its integrated two-band equalizer and four independent fader channels suit dashboard audio controls. Confirm AEC-Q100 qualification, temperature limits, voltage tolerances, and automotive status with the manufacturer before production release.
How does the BD37523FS-E2 equalizer work in an audio design?
The BD37523FS-E2 integrates a two-band equalizer that adjusts bass and tone signals without external equalizer components. In a typical signal chain, a selected source enters the processor, passes through tone and level-control functions, and then continues toward a power amplifier. The resulting design can provide user-selectable tonal balance while reducing the number of separate analog routing and adjustment blocks.
Can BD37523FS-E2 replace a discrete audio control circuit?
The BD37523FS-E2 can replace a discrete arrangement that performs source selection, tone adjustment, and multi-channel volume or fader control when the external circuit uses compatible signal levels and control conventions. It is not a universal drop-in replacement for any discrete board because input impedance, gain structure, DC offsets, control logic, and pin functions must match. Validate those parameters against the manufacturer datasheet before substitution.
What is the best drop-in replacement for BD37523FS-E2?
No confirmed pin-to-pin drop-in replacement for the BD37523FS-E2 was identified from the available manufacturer and cross-reference information. A genuine drop-in replacement must use the same 24-pin SSOP footprint, reproduce the pin functions, support the 7 V to 9.5 V supply range, and provide equivalent source, equalizer, volume, and fader behavior. Use the Request a Quote form on this page to discuss sourcing and qualification options.
When should I choose BD37523FS-E2 over a discrete audio preamplifier?
Choose the BD37523FS-E2 when a design needs three source selectors, two-band tone adjustment, and four independently controlled level channels in a compact surface-mount implementation. A discrete preamplifier may offer greater freedom in circuit topology, but it also requires more components, routing, and control logic. The integrated device is preferable when its fixed control architecture matches the product requirements.
Is BD37523FS-E2 the same as a general-purpose audio codec?
No. The BD37523FS-E2 is an analog sound processor focused on input selection, equalization, volume, and fader control, whereas an audio codec typically includes digital-to-analog and analog-to-digital conversion functions. Its I2C interface supports control of the analog processing functions but does not by itself make it a codec. Choose a codec only when digital audio conversion is required in addition to routing and level adjustment.
What should engineers check when laying out a BD37523FS-E2 board?
Engineers should verify all 24 pins, place input and output decoupling capacitors close to their relevant supply pins, and route audio paths away from digital control signals. The manufacturer datasheet should be used for the exact application circuit, grounding arrangement, and recommended component values. Because three sources and four level-controlled paths converge internally, ground-return design and signal isolation can materially affect channel-to-channel behavior.
Where can I buy BD37523FS-E2 online?
Use the Request a Quote form on this page to request BD37523FS-E2 pricing, current inventory, lead time, and suitable packaging. The form routes the request to XAIPART without embedding a potentially stale price into the product description. For design validation, obtain the current manufacturer datasheet and confirm the 24-pin SSOP ordering code before committing the component to a PCB.
What is the price of BD37523FS-E2?
The current BD37523FS-E2 price should be requested through the Request a Quote form on this page. Pricing can vary with order quantity, packaging, and market conditions, so a static amount would not reliably represent the current offer. Include your target quantity and delivery schedule in the request to obtain the most relevant quotation and stock confirmation.
What is the lead time for BD37523FS-E2?
Request the current BD37523FS-E2 lead time through the Request a Quote form on this page. Lead time depends on stock position, order quantity, package configuration, and delivery terms, so it should be confirmed for the production plan rather than inferred from a generic listing. Providing a forecast and required ship date helps evaluate whether this part is suitable for the intended schedule.
Is BD37523FS-E2 currently in stock?
Use the Request a Quote form on this page to check current BD37523FS-E2 stock and obtain a quantity commitment. A distributor landing page can appear before its inventory quantity changes, so stock should not be inferred from a search result or generic availability label. State the required order quantity and target delivery date when requesting the quotation.

工程参考数据: BD37523FS-E2 ——对比、设计指导和合规信息。

选型指南

Choose the BD37523FS-E2 when the product needs an integrated analog audio-control block with three source selectors, a built-in two-band equalizer, and four independent volume or fader channels. It is particularly suitable for automotive head units, compact preamplifiers, portable systems, home-audio controllers, and sound bars whose system controller can communicate through I2C. Select a discrete implementation only when the design requires a different gain topology, adjustable component values, or functions outside the processor's fixed control architecture. No confirmed same-package drop-in replacement was identified, so a second-source decision should be based on a documented pin and functional comparison rather than package similarity alone. Before production, verify the operating-temperature requirement, electrical limits, pin assignment, reference circuit, and manufacturer lifecycle status for the exact ordering code.

与替代料对比

参数 本产品
Device Type Analog audio sound processor with two-band equalizer
Brand ROHM Semiconductor
Package 24-pin SSOP, 5.40 mm width
Supply Voltage Range 7 V to 9.5 V
Input Selector Count 3 inputs
Independent Volume and Fader Channels 4 channels
Equalizer Bands 2 bands with bass and tone adjustment
Control Interface I2C

设计说明

Place the decoupling components required by the manufacturer close to the corresponding 24-pin SSOP power pins, and route the return current directly to the device ground reference. Audio-source traces should remain short and avoid crossing high-current switching paths. The pin-description table in the manufacturer datasheet is the controlling source for assigning supply and ground connections, because no complete pin list is reproduced on this product page.

Arrange the three source paths and four controlled outputs so that sensitive audio traces do not share long routes with digital control signals. Maintain practical separation between input, output, and I2C traces, especially around the source-switching and equalizer stages. Use the manufacturer reference layout as the starting point for component placement, then adjust for the enclosure, ground-plane boundaries, and connectors in the final mechanical design.

Do not treat the BD37523FS-E2 as a speaker-output amplifier; it processes analog signals and expects downstream amplification. Before firmware integration, verify register definitions, default settings, control timing, and reset behavior in the current manufacturer datasheet. Also check the analog signal amplitudes and input impedance requirements, since a functional block diagram alone does not establish safe operating levels for an external audio source.

For equipment containing switching power converters, displays, or motor-driven mechanisms, keep switching nodes and high-current loops away from the audio inputs and outputs. A continuous reference plane beneath the device can help control return paths, subject to the manufacturer's grounding recommendations. Validate channel-to-channel noise, channel balance, and audible switching artifacts in the final enclosure because connector and power-supply layout can influence performance beyond the IC specifications.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses require confirmation from the current manufacturer documentation. AEC-Q100 qualification is not identified for the standard BD37523FS-E2 ordering code.

数据核验日期: 2026-11-11 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

BD37523FS-E2 datasheet BD37523FS-E2 datasheet pdf BD37523FS-E2 pinout BD37523FS-E2 package BD37523FS-E2 specifications BD37523FS-E2 equivalent BD37523FS-E2 replacement BD37523FS-E2 cross reference BD37523FS-E2 price BD37523FS-E2 stock ROHM BD37523FS-E2 BD37523FS-E2 automotive audio BD37523FS-E2 2 band equalizer BD37523FS-E2 I2C

相关元器件 & 术语

ROHM Semiconductor BD37523FS-E2 BD37523FS analog sound processor audio processor audio IC two-band equalizer bass control tone control input selector volume control fader control I2C 24-pin SSOP SSOP family surface mount automotive head unit compact stereo preamplifier portable audio home audio multichannel speaker control sound bar semiconductor analog audio signal chain power amplifier
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情