CD4020BCM - 14-Stage Binary Counter | onsemi | Industrial
料号: CD4020BCM ✓ 量产中CD4020BCM 概述
A binary counter is a sequential digital circuit that records the number of clock events as a binary value. A ripple-carry counter implements this function as a chain of master-slave flip-flop stages, with each stage driving the next. In the CD4000 CMOS logic family, this architecture provides simple binary division and extended count capability without requiring a microprocessor, programmable counter, or complex external logic. The CD4020BCM is a 14-stage member of that family and is the relevant member when a design needs more than the 12 stages provided by a CD4040B.
The principal feature is the 14-stage counting capability combined with 14 available binary output positions. The counter advances when the clock input changes from high to low, so timing diagrams and triggering logic must account for negative-edge operation. A reset input returns the counter to its all-zero state. The 16-SOIC surface-mount package also supports compact layouts while keeping the counter in a standard small-outline footprint.
Because each stage toggles in response to the preceding stage, the circuit is a ripple counter rather than a synchronous counter. Ripple counters are inexpensive and straightforward, but accumulated propagation delay can affect the timing relationship between output bits at higher operating frequencies. Designers should therefore determine the usable clock rate from the complete timing chain and use the outputs only when their settling requirements are satisfied.
Typical applications include dividing an input clock into lower-rate timing signals, counting external events in industrial control equipment, generating extended binary count sequences in test equipment, and sequencing operations in legacy CMOS designs. The counter can also be combined with external gating or decoding logic to produce repetitive intervals, elapsed-event counts, and periodic control pulses.
Layout should keep the clock and reset traces short, provide a stable ground reference, and avoid routing sensitive clock signals alongside noisy switching nodes. Decoupling capacitors should be placed close to the supply pins according to the manufacturer datasheet and standard mixed-signal layout practice. Because the counter is edge-triggered, reset release timing must be coordinated with the clock to prevent an unintended count immediately after startup.
This product page combines the CD4020BCM's verified architecture and package information with practical selection criteria, drop-in replacement findings, interface considerations, and a parameter-by-parameter comparison. It is designed to help engineers determine whether the device fits a timing or counting design without introducing an unnecessary processor-based implementation.
直接替换替代料: CD4020BCM ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
CD4020BM
✅ 直接替换📋 参考替代料(不在目录中)
CD4020BCM 最大额定值与电气特性
| Counter Type | 14-stage ripple-carry binary counter |
| Number of Counter Elements | 1 element |
| Counting Sequence | Binary |
| Number of Count Stages | 14 stages |
| Counting Edge | Negative edge |
| Counter Width | 14 bit |
| 输出配置 | 14 binary outputs |
| Reset Function | Reset to all-zero state |
| 封装 | 16-SOIC |
| 引脚数 | 16 pins |
| 安装类型 | Surface mount |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Temperature Grade | Industrial |
CD4020BCM 引脚配置
| 引脚 1 | CLK — Clock input that advances the counter on its negative transition |
| 引脚 2 | Q0 — First binary counter output |
| 引脚 3 | Q1 — Second binary counter output |
| 引脚 4 | Q2 — Third binary counter output |
| 引脚 5 | Q3 — Fourth binary counter output |
| 引脚 6 | Q4 — Fifth binary counter output |
| 引脚 7 | Q5 — Sixth binary counter output |
| 引脚 8 | Q6 — Seventh binary counter output |
| 引脚 9 | Q7 — Eighth binary counter output |
| 引脚 10 | Q8 — Ninth binary counter output |
| 引脚 11 | Q9 — Tenth binary counter output |
| 引脚 12 | Q10 — Eleventh binary counter output |
| 引脚 13 | Q11 — Twelfth binary counter output |
| 引脚 14 | Q12 — Thirteenth binary counter output |
| 引脚 15 | Q13 — Fourteenth binary counter output |
| 引脚 16 | RESET — Reset input that returns the counter to its all-zero state |
典型应用
CD4020BCM 适用于 6 应用s: Digital Frequency Divider, Industrial Event Counter, Elapsed-Time Counter, Test Equipment Sequence Generator, Digital State Sequencer, Legacy Control System Retrofit.
Digital Frequency Divider
The CD4020BCM is suitable for dividing a periodic input into lower-frequency binary timing signals because it provides 14 ripple-counter stages. Each stage can be observed individually, allowing the design to select a division ratio rather than relying on a single fixed output. The counter advances on the negative clock transition, so the source waveform must present clean falling edges and avoid pulse-width conditions that violate the manufacturer timing limits. A stage output can drive another logic section only after its ripple transition has settled. The 16-SOIC package keeps the implementation compact, while the 14 available outputs make the device useful in frequency scaling, periodic-event timing, and clock-derived control systems.
推荐
Industrial Event Counter
The CD4020BCM can count qualified events in industrial control equipment when each event is represented by a valid clock pulse. Its 14-bit count capacity provides substantially more state range than an 8-bit counter, and the negative-edge count action allows the input stage to define the exact event boundary. The ripple nature of the counter means that adjacent outputs do not all change simultaneously; downstream decoding should therefore allow adequate settling time before sampling multiple bits. The industrial temperature grade makes the part appropriate for controlled industrial environments, subject to confirmation of the exact operating temperature range. The reset input supports initialization and repeatable production cycles.
推荐
Elapsed-Time Counter
The CD4020BCM can serve as the elapsed-time core in a timer by counting periodic reference-clock transitions. A 14-stage counter supports a maximum count range of 2^14, or 16,384 clock periods, before overflow, while intermediate outputs permit different delay intervals from the same source. The selected output must be decoded only after the ripple chain has stabilized, especially when another output is used as a synchronous reset event. Because counting occurs on the falling edge, the reference signal should have controlled rise and fall times and suitable duty cycle. The 16-SOIC footprint supports compact timer boards without requiring a programmable microcontroller.
推荐
Test Equipment Sequence Generator
The CD4020BCM can create repeatable binary sequences for legacy test equipment by counting external trigger pulses and exposing the counter stages to decoding logic. The 14 outputs permit a test head to select among many timing points without adding a separate programmable counter. Designers should account for ripple delay when multiple outputs are decoded close together, and should use the reset input to establish a deterministic starting state for every test cycle. Its 16-SOIC package is convenient for automated assembly and inspection. The counter is especially suitable where equipment already uses CD4000-series logic and a simple, fixed binary sequence is preferable to a microcontroller-based implementation.
推荐
Digital State Sequencer
The CD4020BCM can act as a state sequencer when external decoding logic converts selected binary outputs into sequential control steps. Because the part advances on a negative clock transition, it integrates naturally with systems that use the falling edge as the state-update event. Only the outputs required at each stage should be decoded when the timing budget is tight, since the ripple architecture can create skew between bits. Reset establishes the initial state and prevents residual count data from affecting a new operating cycle. The 14-stage range supports longer sequences than smaller counters, and the 16-SOIC package simplifies incorporation into existing legacy control boards.
推荐
Legacy Control System Retrofit
The CD4020BCM is useful when maintaining or extending equipment built around CD4000-series CMOS logic. Its 14-stage binary ripple-counter operation, 16-SOIC package, and reset interface fit established control architectures without introducing a new digital subsystem. During a retrofit, compare the original part's supply range, clock limits, output timing, and pin mapping before finalizing the substitution. The negative-edge counting action must match the original timing assumptions, while the reset behavior must preserve the machine's initialization sequence. This use case favors a simple fixed counter over a programmable logic device, particularly where long product lifecycles and supportability are important.
推荐
推荐产品汇总
工程参考数据: CD4020BCM ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | CD4020BM |
|---|---|---|
| Brand | onsemi | STMicroelectronics |
| Package | 16-SOIC | SOIC-16 |
| Counter Type | 14-stage ripple-carry binary counter | 14-stage ripple-carry binary counter |
| Counter Width | 14 bit | 14 bit |
关键差异点
- Provides two additional counter stages compared with a CD4040B (对比 CD4040B)
- Single-element implementation reduces counter integration overhead (对比 CD4020BM)
- Documented cross-brand replacement path (对比 CD4020BM)
设计说明
Treat the clock net as a timing-sensitive signal. The CD4020BCM advances on the falling clock edge, so route the source directly to the clock pin and keep the trace short and away from switching-current paths. Confirm the source voltage, rise time, fall time, and pulse width against the manufacturer timing characteristics. A Schmitt-trigger input is not stated for this device, so slow or noisy edges deserve particular attention.
Do not assume all 14 output bits change simultaneously. This is a ripple-carry counter, so propagation delay accumulates from stage to stage. When decoding multiple outputs, allow the worst-case output transition and settling interval specified by the manufacturer datasheet before sampling the count. Sampling immediately after a clock edge can produce a partially updated value if the design expects a simultaneous binary update.
Place the supply bypass capacitor close to the device's supply and ground connections and provide a low-impedance ground return. Keep the clock and reset traces away from motor, relay, and switching-regulator nodes. For industrial equipment, use a stable reference ground and consider a guard or isolation strategy for external clock sources so common-mode noise does not disturb the negative-edge transition that advances the counter.
合规信息
The CD4020BCM is a general-purpose industrial-grade CMOS logic counter. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the cited manufacturer or distributor records.