CY7C68320C-56LTXC - USB 2.0 ATA Bridge | Infineon
料号: CY7C68320C-56LTXC ✓ 量产中CY7C68320C-56LTXC 概述
A USB bridge is a type of interface controller that translates USB commands and data transfers into the command set expected by an ATA peripheral. In the broader hierarchy, it is an interface controller, a specialized integrated circuit, and ultimately a semiconductor used to connect host computers or embedded systems with storage peripherals. The USB-to-ATA arrangement supports portable storage, industrial equipment, data acquisition systems, and other applications requiring a computer-accessible disk interface.
The CY7C68320C-56LTXC combines a high-speed USB interface with an ATA/ATAPI interface in one compact surface-mount package. Its USB 2.0 designation identifies the high-speed peripheral-side USB standard implemented by the controller, while the ATA/ATAPI side connects to compatible storage devices through the parallel ATA command and data interface. Consolidation of these functions reduces the number of separate interface components required in a storage subsystem.
The 56-QFN package is designed for compact printed-circuit-board assemblies and provides a high pin count for the combined USB, ATA, data, control, power, and ground connections. The exposed-pad package construction described for this part supports heat transfer through the PCB copper area. Exact pin assignments, voltage ratings, timing limits, current requirements, operating-temperature limits, and electrical characteristics should be taken from the manufacturer datasheet before schematic or layout release.
Typical applications include USB-connected external storage, embedded disk systems, industrial data loggers, test equipment, and legacy ATA peripherals connected to modern USB hosts. The bridge is particularly relevant when an equipment design must preserve an ATA storage interface while presenting a USB 2.0 connector to the external system. Firmware, operating-system compatibility, media-command behavior, and power-management requirements remain important system-level considerations.
For PCB design, route the high-speed USB differential pair as a controlled-impedance differential pair and provide the decoupling, return-path, and grounding arrangements required by the manufacturer layout guidance. ATA signals are not a high-speed differential interface, but their length, timing margin, crosstalk, and connector-routing constraints still require deliberate layout planning. The exposed thermal pad should be connected to the appropriate ground plane and stitched according to the package drawing.
This product overview combines interface classification, package information, application guidance, and design-focused selection criteria. It highlights how the USB 2.0 to ATA/ATAPI bridge function supports storage integration while keeping the implementation aligned with the device's 56-QFN footprint, USB routing requirements, and ATA signal-integrity constraints.
直接替换替代料: CY7C68320C-56LTXC ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: CY7C68320C-56LTXC (相同外形与封装尺寸) ——差异在于 Product Type, Package, Package Type, Pin Count.
CY7C68320C-56LFXC
✅ 直接替换联系询价
查看数据手册 →CY7C68320C-56LTXC 规格参数
| Product Type | USB 2.0 to ATA/ATAPI bridge controller |
| USB Interface Standard | USB 2.0 high-speed |
| ATA Interface | ATA/ATAPI |
| Controller Family | EZ-USB AT2LP HS-USB |
| Package Type | 56-QFN |
| Package Dimensions | 8 mm x 8 mm |
| 安装类型 | Surface mount |
| Exposed Pad | Present |
CY7C68320C-56LTXC 8 mm x 8 mm 引脚配置指南
CY7C68320C-56LTXC(8 mm x 8 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: CY7C68320C-56LTXC.
请参阅 数据手册 以查看完整引脚配置。
典型应用
CY7C68320C-56LTXC 适用于 6 应用s: USB External Storage Enclosure, Industrial Data Logger, Embedded ATA Test System, Legacy Peripheral USB Adapter, Portable Measurement Instrument, Network-Attached Storage Front End.
USB External Storage Enclosure
The CY7C68320C-56LTXC fits a USB 2.0 external-storage enclosure that retains an ATA/ATAPI peripheral interface. The controller provides the bridge between the host-facing USB 2.0 connection and the parallel ATA storage interface, allowing the enclosure to present a familiar removable-device or fixed-disk interface to the host. The design must still include the required USB connector, storage connector or soldered interface, power path, firmware, and operating-system compatibility. Because the controller is packaged in an 8 mm by 8 mm 56-QFN, its exposed-pad land pattern and pin assignment must follow the released package drawing. Validation should cover enumeration, cold start, hot insertion, transfer stability, shutdown behavior, and media compatibility.
推荐
Industrial Data Logger
An industrial data logger can use the CY7C68320C-56LTXC when its archival subsystem is based on an ATA or ATAPI device and the service interface must be USB 2.0. The bridge simplifies the host-facing interface while keeping the storage device attached through ATA/ATAPI command and data signals. This arrangement is useful where the equipment was designed around an established ATA storage architecture. Engineering validation should cover the log-writing pattern, file-system behavior, power interruption, write endurance, enclosure temperature, and the operating limits specified for the ordered device. USB signal routing and ATA timing must be separated appropriately to reduce crosstalk and preserve data integrity during long transfers.
推荐
Embedded ATA Test System
The CY7C68320C-56LTXC can serve as the interface controller in test equipment that needs a modern USB 2.0 connection to an ATA or ATAPI mechanism. USB gives the test host a standardized peripheral connection, while the bridge preserves direct access to the legacy storage interface. This approach can support media initialization, functional testing, firmware loading, and diagnostic routines without placing an ATA host controller in the external test computer. The test fixture should include controlled USB power, robust cable or connector design, direct access to all required ATA signals, and thermal monitoring around the 56-QFN. Automated tests should confirm timeout handling, aborted transfers, media reselection, and recovery after a host or power reset.
推荐
Legacy Peripheral USB Adapter
The CY7C68320C-56LTXC is applicable to a legacy-peripheral adapter that exposes an ATA/ATAPI mechanism over USB 2.0. This arrangement allows older storage-oriented equipment to connect to a modern host without redesigning the entire product around a different storage protocol. The adapter board must preserve the ATA interface's pin functions, termination, voltage compatibility, and connector requirements while implementing a compliant USB side. Firmware must translate host commands and report media status correctly, and the enclosure should provide strain relief and reliable power sequencing. Before release, test enumeration, suspend and resume, abnormal disconnect, filesystem mounting, sustained transfers, and recovery after loss of the storage device.
推荐
Portable Measurement Instrument
A portable measurement instrument can use the CY7C68320C-56LTXC when captured data must be transferred from an ATA-based storage device to a laptop or service computer over USB 2.0. The bridge reduces the host-side complexity because the external computer communicates through USB while the instrument retains its established ATA storage path. Because the application may operate in variable ambient conditions, the engineer should confirm the exact device's temperature and power limits against the enclosure specification. The design also needs stable storage rails, controlled USB disconnect behavior, and sufficient error handling for removable media. USB enumeration and transfer tests should be repeated with the intended host operating systems and cable arrangements to identify compatibility issues early.
推荐
Network-Attached Storage Front End
The CY7C68320C-56LTXC can be evaluated for a network-attached-storage front end when the internal storage subsystem uses ATA/ATAPI and the external service interface is USB 2.0. The USB bridge is not itself a network controller, but it can provide a local maintenance or direct-access path alongside the network function. This can simplify service access to a disk array or individual storage mechanism without making USB the primary network transport. System partitioning must prevent the host from modifying the storage unexpectedly, and power-loss behavior must be designed to avoid filesystem corruption. Validate USB performance separately from network throughput, check hot-plug handling if applicable, and ensure that bridge firmware and the storage controller use compatible ATA and command sets.
推荐
推荐产品汇总
工程参考数据: CY7C68320C-56LTXC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | CY7C68320C-56LFXC |
|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies |
| Package | 56-QFN (8x8) | 56-QFN (8x8) |
| Product Type | USB Bridge, USB to ATA USB 2.0 ATA Interface | USB-to-ATA bridge controller |
| ATA Interface | ATA/ATAPI | ATA/ATAPI |
| Controller Family | EZ-USB AT2LP HS-USB | EZ-USB AT2LP HS-USB |
| Nominal Device Class | 56 MHz | 56 MHz |
| Mounting Type | Surface mount | Surface mount |
关键差异点
- Purpose-built USB 2.0 to ATA/ATAPI conversion (对比 General-purpose USB controllers)
- Compact 56-QFN implementation (对比 Larger legacy bridge packages)
- Specific HS-USB controller identity (对比 CY7C68320C-56LFXC)
设计说明
Route the USB high-speed differential pair as a matched, controlled-impedance pair with minimal stubs and continuous return-path references. Keep the USB connector, bridge controller, and decoupling network in the same signal-flow order. Follow the released reference layout for impedance geometry because an 8 mm by 8 mm 56-QFN placement alone does not establish compliant USB channel behavior.
Place the required input and output decoupling capacitors directly beside their associated power pins, with short ground connections and no unnecessary loop area. The 56-QFN exposed pad requires the land pattern and paste procedure specified by the manufacturer. Inspect the assembly after reflow for voiding or pad defects because a compromised exposed-pad connection can increase junction temperature and impair repeatable operation.
Keep ATA data and control routing away from the USB differential pair, particularly around the USB connector and controller. Although ATA is not a high-speed differential interface, its many parallel signals can create crosstalk and timing margins that vary with board loading. Use the recommended topology and spacing from the manufacturer datasheet, avoid unnecessary stubs, and verify read and write margin with realistic storage-device and cable configurations.
Do not approve CY7C68320C-56LFXC as a substitute solely because it shares the CY7C68320C base name. Compare the LTXC and LFXC suffixes against their released datasheet tables for temperature grade, supply limits, electrical characteristics, package dimensions, exposed-pad requirements, and pin functions. A board-layout reuse also depends on confirming that every pin has the same function and that no new power or sequencing requirement is introduced.
Design the storage and bridge power rails for startup sequencing, inrush, sustained transfer load, and safe removal behavior. ATA media can draw changing current during spin-up or write activity, so the supply must not be sized only from the controller's nominal operating condition. Validate the complete power tree across cold start, hot insertion, suspend, resume, shutdown, and unexpected host removal to prevent unintended resets or corrupted writes.
合规信息
Compliance declarations for the exact CY7C68320C-56LTXC orderable MPN should be obtained from the manufacturer before being claimed in a released design.