DG407DY - 16-Channel CMOS Analog Multiplexer | Renesas
料号: DG407DY ✓ 量产中DG407DY 概述
An analog multiplexer is an integrated switching circuit that connects one signal source to one of several channels according to digital address inputs. The DG407DY can route sixteen single-ended analog signals or eight differential signal pairs. This makes it useful for consolidating repetitive measurements, sharing scarce analog front ends, controlling sensor inputs, and expanding the number of signals handled by a single analog-to-digital converter. In the electronic-component hierarchy, it is a CMOS analog switch IC, an interface IC, and ultimately a semiconductor.
The core benefits are integration and control simplicity. Sixteen switches, address decoding, threshold referencing, and enable control are combined on one device, reducing the number of discrete analog switches and associated routing components. The 100-ohm on-resistance specification supports the stated analog-switching role, while the 28-pin SOIC package provides a surface-mount implementation for compact industrial, instrumentation, and test systems. The manufacturer identifies the DG407 family as being in production.
The DG407 uses digital select inputs to connect one common terminal to a selected channel. Its internal voltage reference establishes logic thresholds compatible with both TTL and CMOS control systems. The ENABLE input allows a system designer to place the device in an inactive state or use it to arbitrate access among multiple multiplexers. DG406 and DG407 devices are documented as drop-in replacements for the popular DG506A and DG507A series, providing a migration path when the older multiplexers are unavailable.
Typical uses include multiplexed data acquisition, resistance and capacitance measurement systems, process-control interfaces, automated test equipment, battery and power-system monitoring, and general-purpose analog signal routing. The differential configuration is especially useful for paired sensor outputs, balanced measurement nodes, and systems where keeping source and return paths together reduces routing complexity.
Designers should treat analog signal amplitude, bandwidth, charge injection, off-state leakage, logic levels, and injected noise as the principal switching considerations. Keep select and enable traces away from sensitive analog paths, use a common ground reference between the source, multiplexer, and receiving circuit, and decouple the supply close to the device. This page combines the DG407 architecture, sourcing guidance, design cautions, and documented legacy-device compatibility to support practical part selection.
直接替换替代料: DG407DY ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料DG407DY 规格参数
| Multiplexer Configuration | 16 single-ended channels or 8 differential channels |
| Number of Analog Switches | 16 switches |
| Multiplex Ratio | 8:1 differential |
| Circuit Count | 2 circuits |
| On-Resistance | 100 ohm maximum |
| Technology | CMOS |
| Logic Compatibility | TTL-compatible and CMOS-compatible |
| Enable Control | 1 ENABLE input |
| Logic Threshold Reference | 1 internal voltage reference |
| 封装 | 28-pin SOIC |
| 引脚数量 | 28 pins |
| 安装类型 | Surface mount |
| Production Status | Production |
| Legacy-Replacement Position | Documented as a drop-in replacement for DG506A and DG507A series devices |
DG407DY 28-pin soic 引脚配置指南
DG407DY(28-pin soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: DG407DY.
请参阅 数据手册 以查看完整引脚配置。
典型应用
DG407DY 适用于 6 应用s: Multiplexed Data Acquisition, Differential Sensor Interfacing, Automated Test Equipment, Process-Control Signal Routing, Resistance and Capacitance Measurement, Battery and Power-System Monitoring.
Multiplexed Data Acquisition
The DG407DY lets a single analog-to-digital converter or measurement front end sample 16 single-ended inputs or eight differential pairs. Its sixteen internal switches and digital address decoding reduce the number of external routing components required in a compact data-acquisition system. The 100-ohm maximum on-resistance is important when the source impedance is high, while the 28-pin SOIC package simplifies PCB integration. Designers should budget acquisition time for channel settling and verify that input leakage, charge injection, and signal bandwidth remain acceptable for the selected sensors and converter.
推荐
Differential Sensor Interfacing
The DG407DY can switch eight differential signal pairs, making it appropriate for paired sensor outputs, balanced measurement nodes, and analog systems that require source and return paths to follow the same route. Eight differential channels use the same multiplexing framework as 16 single-ended channels, conserving interface capacity and reducing the number of external switch packages. The 100-ohm on-resistance rating must be weighed against source impedance, while the address and enable controls provide deterministic routing under a digital controller.
推荐
Automated Test Equipment
DG407DY is suited to automated test systems that must connect several test points to a shared instrument or measurement chain. Sixteen analog switches can be selected digitally without operating a separate relay at every point, while ENABLE provides a common way to disconnect or arbitrate the device. The 28-pin SOIC package supports dense test hardware, and the 100-ohm maximum on-resistance provides a defined starting point for impedance-sensitive fixtures. Guard against charge injection and insufficient settling time in high-accuracy measurements.
推荐
Process-Control Signal Routing
The DG407DY can route multiple process-pressure, temperature, level, or valve-feedback analog signals into a shared controller input. Sixteen channels give a compact control system more analog connectivity, and TTL- and CMOS-compatible decoding allows the device to be commanded by common digital control hardware. The ENABLE input can prevent unintended routing when the controller is changing operating states. Engineers should verify grounding, common-mode limits, surge conditions, and whether the 100-ohm on-resistance introduces an acceptable error with the installed sensor and wiring.
推荐
Resistance and Capacitance Measurement
DG407DY can connect multiple resistive or capacitive devices under test to a common measurement circuit, reducing the number of dedicated front-end channels. Digital channel selection allows a controller to run systematic measurements without adding sixteen separate analog switch packages. The internal threshold reference and TTL- or CMOS-compatible decode logic simplify control implementation. Measurement accuracy still depends on the complete signal path, so account for the 100-ohm on-resistance, leakage, switch charge injection, settling time, and the impedance of the selected device under test.
推荐
Battery and Power-System Monitoring
The DG407DY is suitable for centralized monitoring of multiple voltage, current, or temperature-sense channels in battery-management and power-control equipment. Sixteen single-ended channels can be sequenced into a common measurement amplifier, while eight differential channels can support paired sensing arrangements. The integrated address decoder simplifies connection to a controller, and the 28-pin SOIC footprint is convenient for compact power boards. Designers must verify the analog signal range, supply limits, ground strategy, channel-switching time, and isolation requirements before using one common reference across high- and low-side measurements.
推荐
推荐产品汇总
工程参考数据: DG407DY ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 28-pin SOIC |
| Brand | Renesas Electronics |
| Single-Ended Channels | 16 channels |
| Differential Channels | 8 channels |
| Multiplex Ratio | 8:1 differential |
| Circuit Count | 2 circuits |
| On-Resistance | 100 ohm maximum |
| Technology | CMOS |
| Logic Compatibility | TTL-compatible and CMOS-compatible |
| Enable Control | ENABLE input |
| Production Status | Production |
设计说明
Treat the DG407DY as part of the complete analog signal path, not as an ideal zero-resistance switch. The specified maximum on-resistance is 100 ohm, so source impedance, leakage current, and downstream input impedance determine the actual level error and usable bandwidth. Keep routed analog traces short, use a continuous ground reference, and place the multiplexer where connector and cabling noise will not be amplified by an impedance mismatch.
Separate address, ENABLE, and supply routing from sensitive analog nets where practical. Place local supply bypassing close to the device pins, maintain a low-impedance ground connection, and avoid sharing narrow analog and digital return paths unnecessarily. Because switching events can introduce charge and coupling into the selected node, reserve measurement or settling time after each channel change and use a quiet output node when measuring small signals.
Do not infer pin compatibility from package size alone. The DG407DY is a 28-pin SOIC with 16 single-ended or eight differential routing functions, so a 16-pin 8:1 multiplexer such as DG408DY+ does not share the same terminal arrangement. Before substituting any device, compare every pin name, the common-terminal architecture, address logic, ENABLE polarity, supply voltage, analog signal range, on-resistance, and switching timing from the manufacturer datasheets.
合规信息
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified in the product information. The Y suffix may denote a lead-free ordering code, but that interpretation should be confirmed in the manufacturer ordering information before it is used for compliance decisions.