NI

DG429DN - 4:1 Latchable Analog Multiplexer | Vishay Siliconix

料号: DG429DN ✓ 量产中
44 V Vdss 100 ohm Rds(on) 20-pin PLCC Package High; numerical transition time not stated Speed
最小起订量: 1 |

DG429DN 概述

The Vishay Siliconix DG429DN is a dual 4:1 latchable analog multiplexer IC with an on-resistance of 100 ohm, supplied in a 20-pin PLCC package measuring 9 mm by 9 mm. The device can operate as a single-ended eight-channel or differential four-channel multiplexer, with address and control latches integrated on chip. Its maximum voltage rating extends to 44 V, and single-supply operation is supported.

An analog multiplexer is an interface IC that routes one of several analog inputs to an output terminal. The DG429DN belongs to the analog switch and multiplexer hierarchy, where address-controlled switching replaces multiple discrete relays or manually selected signal paths. Integrated latches make it suitable for data-acquisition systems, process control, avionics, and automated test equipment. The TTL-compatible address interface reduces external control-logic requirements while preserving microprocessor-bus compatibility.

The DG429DN provides two independent 4:1 analog switching circuits. Its break-before-make operating behavior prevents momentary crosstalk between adjacent inputs during a transition. Vishay describes low on-resistance, low charge injection, and high switching speed as principal device characteristics. The typical power-consumption figure is 0.3 mW, making the IC suitable for instrumentation where signal-routing power must remain modest. On-board address latches also simplify control implementation in bus-oriented systems.

The maximum analog signal voltage is 44 V, while the latchable control architecture supports single-supply operation. These characteristics make the device applicable to industrial measurement, automated test equipment, process-control systems, and avionics signal routing. The integrated latches allow a host processor or logic controller to select channels while reducing the number of external storage elements and simplifying board-level timing.

Designers should examine the complete pin description and operating limits in the Vishay Siliconix datasheet before assigning signal paths. Pay particular attention to supply sequencing, allowable input and output voltages, control logic states, and the break-before-make interval. The 20-pin PLCC footprint also requires a compatible land pattern and appropriate assembly handling; the package is not one of the standard surface-mount packages represented by the site’s standard pinout library.

This page combines the manufacturer’s device description, distributor listing information, and a focused comparison of documented drop-in alternatives. It also highlights the practical value of the DG429DN’s TTL-compatible latches, extended 44 V rating, single-supply capability, low 0.3 mW power consumption, and break-before-make switching for engineers designing multiplexed analog signal paths.

直接替换替代料: DG429DN ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

DG429DN-E3

✅ 直接替换
📦 20-pin PLCC (9 mm x 9 mm)
Electrical and functional differences: 0 stated; the E3 suffix adds a documented lead-free designation.

📋 参考替代料(不在目录中)

DG529CWN+T

✅ 直接替换
📦 20-pin PLCC (9 mm x 9 mm)
The documented channel count and terminal arrangement match, giving a 0 count difference; supply, timing, and signal-level limits require final comparison.

📋 参考替代料(不在目录中)

DG429DN 规格参数

Device Type Dual 4:1 latchable analog multiplexer
Multiplexer Configuration Single 8-channel or differential 4-channel
Number of Circuits 2 circuits
On Resistance 100 ohm
Maximum Voltage Rating 44 V
Supply Operation Single-supply operation supported
Address Control Interface On-board TTL-compatible address latches
Switching Sequence Break-before-make
Typical Power Consumption 0.3 mW
Charge Injection Low; numerical value not stated
Switching Speed High; numerical transition time not stated
Processor Interface Microprocessor-bus compatible
Latchup Protection Epitaxial layer prevents latchup
Package Type 20-pin PLCC
Package Dimensions 9 mm x 9 mm

DG429DN 9 mm x 9 mm 引脚配置指南

DG429DN(9 mm x 9 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

DG429DN 的 9 mm x 9 mm 封装引脚图

暂无详细引脚数据: DG429DN.

请参阅 数据手册 以查看完整引脚配置。

典型应用

DG429DN 适用于 6 应用s: Multiplexed Data Acquisition, Industrial Process Control, Automated Test Equipment, Avionics Signal Routing, Instrumentation Signal Multiplexing, Microprocessor-Controlled Analog Routing.

📊

Multiplexed Data Acquisition

The DG429DN fits data-acquisition front ends that must route multiple analog inputs to a shared converter or measurement channel. Two independent 4:1 sections allow the device to select among eight single-ended sources or four differential sources. Its on-board TTL-compatible address latches simplify microprocessor-bus control, while break-before-make switching reduces unwanted interaction as the selected input changes. The documented 0.3 mW power-consumption figure also limits the switching circuit’s contribution to system power. Engineers should verify channel capacitance, injection behavior, and signal bandwidth in the manufacturer datasheet before finalizing the acquisition timing.

🏭

Industrial Process Control

The DG429DN is appropriate for process-control equipment that must select among pressure, temperature, position, or analog sensor signals. A dual 4:1 arrangement reduces the number of external routing components while integrated address latches retain the selected channel between controller updates. Break-before-make operation helps isolate neighboring channels during transitions, while the 44 V maximum voltage rating provides headroom for industrial signal-routing environments. The design should include protection appropriate to field wiring and should verify the permitted operating voltages, control thresholds, and settling behavior against the actual sensor network.

🖥️

Automated Test Equipment

The DG429DN can route test stimuli or measurement channels in automated test equipment where repeatable address-controlled selection is required. Two 4:1 muxes provide flexible single-ended or differential connectivity, and the integrated TTL-compatible latches simplify coordination with test-control logic. Break-before-make switching helps prevent adjacent test paths from overlapping during channel changes. The 20-pin PLCC package supports compact instrument construction, although the assembly must use the proper leaded PLCC land pattern and soldering process. Validate signal bandwidth, charge injection, transition timing, and allowable voltage conditions for each tester signal path.

✈️

Avionics Signal Routing

The DG429DN is applicable to avionics and other high-reliability signal-routing systems that benefit from latched channel selection and single-supply operation. The device supports eight single-ended or four differential channels, allowing shared routing resources to be used efficiently. Its break-before-make sequence helps avoid momentary crosstalk between adjacent inputs, and the documented 44 V maximum rating broadens the range of routable signals. Because qualification status, temperature limits, and detailed absolute maximum ratings are not established on this page, aerospace programs must confirm those requirements directly from the manufacturer documentation before design release.

🔧

Instrumentation Signal Multiplexing

The DG429DN fits precision instrumentation that must share a common analog front end among several measurement sources. Its low 100 ohm on-resistance is suitable for many low-impedance signal-routing networks, while the latched address interface reduces the control burden on the measuring system. The dual 4:1 organization permits differential pairing when source polarity matters, and break-before-make switching helps maintain channel separation. For high-frequency or high-impedance sources, engineers should check capacitance, bandwidth, charge injection, and settling specifications in the manufacturer datasheet rather than inferring performance from the on-resistance alone.

🧩

Microprocessor-Controlled Analog Routing

The DG429DN is well suited to bus-controlled analog routing because its address latches are compatible with TTL logic and can retain a selected channel without continuous refresh. A host processor can use decoded address and enable signals to select among the two 4:1 sections. The 0.3 mW typical power-consumption figure is beneficial in compact measurement equipment, while the 44 V maximum voltage rating supports higher-range signal paths. Firmware should account for the device’s electrical and mechanical specifications, including break-before-make behavior, before changing the channel state, and PCB traces should minimize coupling between switched analog inputs.

推荐产品汇总

DG429DN NI 用于: Multiplexed Data Acquisition, Industrial Process Control, Automated Test Equipment, Avionics Signal Routing, Instrumentation Signal Multiplexing, Microprocessor-Controlled Analog Routing DG429DN-E3 Lead-free drop-in configuration 用于: Multiplexed Data Acquisition, Industrial Process Control, Avionics Signal Routing, Microprocessor-Controlled Analog Routing DG529CWN+T Documented drop-in cross-reference candidate 用于: Automated Test Equipment, Instrumentation Signal Multiplexing
What is the DG429DN and what does it do?
The DG429DN is a Vishay Siliconix dual 4:1 latchable analog multiplexer with a 100 ohm on-resistance in a 20-pin PLCC package. It can provide either eight single-ended channels or four differential channels. On-board TTL-compatible address latches retain the selected channel, making the device useful for microprocessor-controlled signal routing in data-acquisition, process-control, avionics, and automated-test systems.
What is the operating voltage of DG429DN?
The DG429DN supports single-supply operation, and its documented absolute maximum voltage rating extends to 44 V. The manufacturer datasheet should be consulted for the precise operating supply range, control-input thresholds, and analog signal limits before design sign-off. The 44 V figure is the documented maximum voltage rating and should not automatically be treated as the permitted continuous operating supply voltage.
Where can I download the DG429DN datasheet PDF?
The official Vishay Siliconix datasheet is available from the manufacturer document link published for the DG429 family. It describes the DG428 and DG429 as single eight-channel or differential four-channel latchable analog multiplexers, including the extended 44 V maximum rating, TTL-compatible address latches, break-before-make behavior, and single-supply capability. Use the manufacturer PDF for authoritative pin assignments, absolute maximum ratings, and timing information.
Where can I find the DG429DN pinout?
The DG429DN pinout is documented in the Vishay Siliconix DG429 family datasheet. The device is packaged in a 20-pin PLCC measuring 9 mm by 9 mm, with address and control latches integrated on chip. Because this PLCC configuration is not represented by the site’s standard package-pinout library, the page does not reproduce an unverified pin map. Use the manufacturer pin-description table when assigning PCB tracks.
What are the key specifications of DG429DN that engineers should know?
The key DG429DN specifications are two independent 4:1 switching circuits, a 100 ohm on-resistance, an 8-channel single-ended or 4-channel differential configuration, and a 20-pin 9 mm by 9 mm PLCC package. The device also supports single-supply operation, uses break-before-make switching, includes TTL-compatible address latches, and has a typical power-consumption figure of 0.3 mW.
How does break-before-make switching help the DG429DN?
Break-before-make switching makes the DG429DN open the existing path before connecting the next channel, reducing the chance that two analog inputs are momentarily connected together. This behavior protects sensitive measurement systems from unintended crosstalk or transient interaction during address changes. The DG429 family documentation identifies break-before-make as a principal feature for microprocessor-controlled data-acquisition and process-control applications.
Is the DG429DN suitable for data acquisition and process control?
The DG429DN is suitable for data-acquisition and process-control systems that require several analog inputs to share a limited number of measurement channels. Its integrated TTL-compatible address latches simplify host-controlled channel selection, while break-before-make switching helps prevent interaction between adjacent channels. The 44 V maximum voltage rating also supports signal-routing designs with wider voltage ranges than typical low-voltage multiplexer ICs.
What is the difference between DG429DN and DG429DN-E3?
The DG429DN-E3 is documented as a complete, pin-compatible replacement for the DG429DN, with the same 20-pin PLCC package and consistent electrical and functional characteristics. Its distinguishing documented feature is lead-free status, and the E3 version is identified as RoHS compliant. The standard DG429DN compliance markings are not stated, so procurement teams should verify the exact suffix and required environmental status before substitution.
DG429DN vs DG529CWN+ - which is better for a 4:1 mux design?
The DG529CWN+ is documented as a complete replacement whose terminals, package, and main functional characteristics are consistent with the DG429DN-E3. For a new 4:1 multiplexing design, choose the exact suffix supported by the intended supply, control, and qualification requirements rather than assuming interchangeability from function alone. The DG429DN remains directly identified as a Vishay Siliconix dual 4:1 multiplexer in a 20-pin PLCC.
When should I choose DG429DN over another latchable analog multiplexer?
Choose the DG429DN when the design needs a dual 4:1 analog multiplexer with integrated TTL-compatible address latches, break-before-make switching, single-supply support, and a documented maximum voltage rating of 44 V. It is particularly suitable for compact instrumentation, process-control, avionics, and automated-test signal routers. Confirm supply limits, control timing, channel capacitance, and exact pin requirements before selecting any replacement.
What can replace the DG429DN?
The DG429DN-E3 is the clearest drop-in replacement because its documentation describes consistent terminals, package, and principal performance characteristics with the DG429DN, while adding a lead-free ordering designation. Cross-reference information also identifies DG529CWN+ as a complete replacement with matching terminal and package characteristics. Confirm the exact supply range, timing limits, and performance at the intended signal amplitude before approving either substitution.
Is DG429DN the same as DG529CWN+?
The DG529CWN+ is documented as a complete replacement with terminals and packages consistent with the DG429 family and with main functional characteristics that are consistent with the DG429DN-E3. It can therefore be considered for drop-in review, but engineers should still verify operating limits and timing against their design. The DG529CWN+ carries the suffix +T in the cited cross-reference, so its purchasing configuration must also be confirmed.
Where can I buy DG429DN and check current availability?
Use the Request a Quote form on this page to request current DG429DN availability, unit pricing, quantity breaks, and lead time for the exact 20-pin PLCC configuration. The listing identifies the part as a Vishay Siliconix dual 4:1 analog multiplexer IC, but pricing and stock can change independently of technical documentation. Include the target quantity, delivery location, and required compliance status in the request.
What is the price of DG429DN?
Current DG429DN pricing is supplied through the Request a Quote form on this page rather than embedded in the technical description. Quote requests should identify the exact MPN DG429DN, package, desired quantity, and whether the lead-free DG429DN-E3 variant is acceptable. This approach keeps commercial information aligned with current availability and avoids treating changing market values as fixed technical specifications.
What is the lead time for DG429DN?
Request the current DG429DN lead time through the Request a Quote form on this page. Lead time can depend on manufacturer inventory, order quantity, packaging configuration, and delivery destination, none of which can be established from a static product description. State the required quantity and shipment location when requesting a quotation so the commercial response can reflect the actual production and logistics requirements.

工程参考数据: DG429DN ——对比、设计指导和合规信息。

选型指南

Choose the DG429DN when the design requires a dual 4:1 analog multiplexer with integrated TTL-compatible address latches, break-before-make switching, single-supply capability, and a 20-pin PLCC footprint. It is especially relevant to data-acquisition, process-control, avionics, and automated-test systems with several analog inputs and limited routing resources. Select DG429DN-E3 when a lead-free ordering designation is required and its compliance documentation matches the production program. Consider DG529CWN+T only after reviewing its operating limits, timing, and supply requirements because the cross-reference identifies terminal and package consistency but does not establish every electrical parameter. No alternative should be approved solely from package appearance; confirm pin states, channel topology, control levels, signal bandwidth, and absolute maximum ratings for the specific design.

与替代料对比

参数 本产品 DG429DN-E3 DG529CWN+T
Brand Vishay Siliconix Vishay Siliconix Vishay Siliconix
Package 20-pin PLCC (9 mm x 9 mm) 20-pin PLCC 20-pin PLCC
Device Function Dual 4:1 latchable analog multiplexer Dual 4:1 latchable analog multiplexer Dual 4:1 analog multiplexer

关键差异点

  • Documented lead-free drop-in configuration (对比 DG429DN)
  • Dual 4:1 routing in a 20-pin PLCC (对比 DG529CWN+T)
  • Integrated TTL-compatible latched addressing (对比 DG529CWN+T)

设计说明

Do not equate the documented 44 V maximum voltage rating with the full permitted operating range. Review the absolute maximum ratings, recommended supply range, analog signal limits, and control-input thresholds in the manufacturer datasheet. Also confirm whether the selected circuit uses single-ended or differential addressing; the DG429DN supports an eight-channel single-ended configuration and a four-channel differential configuration, but the valid control states and signal connections must follow the pin-description table.

Route each analog input and common output as a compact, mutually coupled group where practical, and keep digital address and enable traces away from sensitive source nodes. The latched interface may reduce control activity, but the address transitions can still create coupling during channel changes. Provide a ground-return path close to the analog traces and avoid sharing connector or return-current routes with switching nodes. PCB review should include the 20-pin PLCC footprint, pin-one orientation, and assembly access.

Account for the break-before-make interval in control firmware and acquisition timing so that a channel is not sampled while the previous path is disconnecting. For high-impedance sensors or fast signals, evaluate the datasheet’s off leakage, on capacitance, charge injection, and transition-time characteristics. The 100 ohm on-resistance is appropriate for many low-impedance routing networks, but it does not by itself guarantee low distortion at high source impedances or high signal frequencies.

Design the supply and decoupling around the manufacturer’s recommended operating range and switching requirements. The documented 0.3 mW figure describes low switching-circuit power consumption, but it should not be treated as the complete system power budget or as a substitute for dynamic supply-current analysis. Use the datasheet power-supply limits, control timing, and transient requirements to determine stable rail voltage and bypass-capacitor placement.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The DG429DN-E3 variant is identified as lead free and RoHS compliant. Compliance for the exact standard DG429DN suffix is not established, so the procurement configuration must be confirmed separately.

相关搜索

DG429DN datasheet DG429DN pinout DG429DN datasheet pdf DG429DN equivalent DG429DN replacement DG429DN cross reference DG429DN vs DG529CWN+T DG429DN PLCC-20 pinout DG429DN 4:1 analog mux DG429DN 100 ohm on resistance DG429DN 44V multiplexer DG429DN application circuit DG429DN price DG429DN stock Vishay Siliconix DG429DN

相关元器件 & 术语

Vishay Siliconix DG429DN DG429DN-E3 DG529CWN+T analog multiplexer analog switch interface IC latchable multiplexer 4:1 multiplexer single-ended channel differential channel TTL-compatible address latch break-before-make on resistance charge injection microprocessor bus compatibility 44 V maximum voltage rating 20-pin PLCC PLCC package family surface-mount package data acquisition process control avionics automated test equipment single-supply operation
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情