DSPIC33EP128MU206T-I/MR - 16-bit DSC, 128KB Flash | Microchip
料号： DSPIC33EP128MU206T-I/MR ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $6.5 | $6.50 |
| 10 | $5.85 | $58.50 |
| 100 | $5.2 | $520.00 |
| 500 | $4.68 | $2,340.00 |
| 1,000 | $4.3 | $4,300.00 |
DSPIC33EP128MU206T-I/MR 概述
A digital signal controller combines the computational architecture of a microcontroller with the arithmetic throughput of a digital signal processor. Within the power-management hierarchy of embedded systems, a DSC sits between general-purpose MCUs and dedicated DSPs, offering deterministic interrupt latency and single-cycle MAC (multiply-accumulate) instructions alongside standard MCU peripherals, making it the natural choice for control loops that also require fast math.
Key characteristics include the 16-bit dsPIC33EP core executing DSP instructions at up to 70 MIPS, 128 KB (44 Kword x 24-bit) of self-programmable Flash with ECC-class reliability features, 16 KB of RAM, and a high-speed 12-bit ADC capable of simultaneous multi-channel sampling. The MU20x family is distinguished by its USB OTG capability and dual CAN 2.0B modules, which set it apart from the GP and MC families.
Architecturally, the device integrates a DSP engine with two 40-bit wide accumulators, hardware division support, bit-reversal addressing for FFTs, and a rich peripheral set including UART, SPI, I2C, input capture, output compare, and PWM modules - all serviced through a vectored interrupt controller.
Typical applications include digital power supplies, motor control drives, USB-connected industrial instruments, CAN-networked automotive and industrial nodes, and general-purpose sensing systems that benefit from DSP math capability.
When designing with this DSC, budget careful attention to the 3.0V-3.6V supply domain and decoupling of the core/regulator pins, and verify programming clock constraints when using the internal FRC oscillator.
This page synthesizes distributor sourcing data, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
直接替换替代料： DSPIC33EP128MU206T-I/MR ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： DSPIC33EP128MU206T-I/MR （相同外形与封装尺寸） ——差异在于 Package, RAM, Core Architecture, Operating Temperature, Packaging.
快速对比工具——选择替代料号进行并排对比：
DSPIC33EP128MU206-I/MR
✅ 直接替换✓ 有现货
$4.1 / 个
查看数据手册 →DSPIC33EP256MU206T-I/MR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
DSPIC33EP64MU206T-I/MR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
DSPIC33EP128GM306T-I/MR
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$3.72 / 个
查看数据手册 →DSPIC33EP128MU206T-I/MR 最大额定值与电气特性
| Core Architecture | 16-bit dsPIC33EP DSC core |
| Program Memory (Flash) | 128 KB (44 Kwords x 24-bit) |
| RAM | 16 KB |
| ADC Resolution | 12-bit |
| Series | dsPIC33EPxxxMU20x |
| 安装类型 | Surface Mount |
| 封装 | 64-pin QFN (MR) |
| Packaging | Reel (Tape & Reel) |
| Standard Package Quantity | 3300 |
| Product Type | Digital Signal Controllers & Processors - DSP, DSC |
| Tradename | dsPIC |
| Instruction Width | 24-bit |
| RoHS 状态 | unknown |
DSPIC33EP128MU206T-I/MR 3300 引脚配置指南
DSPIC33EP128MU206T-I/MR（3300 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： DSPIC33EP128MU206T-I/MR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
DSPIC33EP128MU206T-I/MR 适用于 6 应用s: Digital Power Supplies, Motor Control Drives, USB-Connected Industrial Instruments, CAN-Networked Automation Nodes, Portable Battery-Powered Sensing, Automotive-Adjacent Control Systems.
Digital Power Supplies
The DSPIC33EP128MU206T-I/MR fits digital power applications because its 16-bit dsPIC33EP core executes single-cycle DSP multiply-accumulate instructions, enabling fast compensator updates for voltage-mode or current-mode control loops. The 12-bit ADC provides fast, multi-channel sampling of output voltage, input voltage, and inductor current, while output-compare/PWM modules generate precise gating waveforms with configurable dead time. Deployed between the sensing front end and power stage, the DSC replaces analog compensation networks with firmware, adding telemetry and protection features; the trade-off versus analog control is increased firmware validation effort. The 128 KB Flash holds control, communication, and diagnostics code comfortably, and 16 KB RAM supports state histories and filter coefficients.
推荐
Motor Control Drives
For BLDC, PMSM, and ACIM drive systems, the DSPIC33EP128MU206T-I/MR provides the combination of DSP math throughput and control peripherals needed for field-oriented control. Single-cycle MAC operations accelerate Clarke/Park transforms and PI loops, the 12-bit ADC samples phase currents fast enough for low-inductance machines, and multiple PWM-capable output-compare modules drive three-phase inverters with hardware dead time. The industrial (I) temperature grade suits motor-drive thermal environments. Firmware placed in the 128 KB Flash can include sensorless observers and CAN 2.0B network command interfaces simultaneously, since the family integrates dual CAN modules. Compared with a general-purpose MCU, the DSC delivers deterministic loop timing essential for stable high-speed motor control.
推荐
USB-Connected Industrial Instruments
The MU20x family's defining feature is its full-speed USB 2.0 On-The-Go module, and the DSPIC33EP128MU206T-I/MR leverages it for instruments that attach to PCs or tablets: data loggers, sensor hubs, test fixtures, and bench accessories. As a USB device the DSC implements CDC or HID classes for driverless host connectivity; as a USB host it can read USB flash media or host peripheral devices - OTG flexibility general-purpose dsPIC33EP variants lack. The 12-bit ADC digitizes sensor channels, 16 KB RAM buffers sample streams, and the dual CAN 2.0B modules bridge fieldbus data to the USB link, effectively making the part a protocol converter between industrial CAN networks and USB-based supervision systems within one 64-pin QFN chip.
推荐
CAN-Networked Automation Nodes
With dual CAN 2.0B modules on-chip, the DSPIC33EP128MU206T-I/MR serves automation nodes that bridge two CAN segments or implement redundant network topologies in factory equipment, HVAC controllers, and building automation. The dsPIC33EP core runs protocol stacks and local control logic concurrently, the 128 KB Flash accommodates both application firmware and a persistent parameter store, and the 12-bit ADC handles on-board sensing of currents, temperatures, and supply rails. Deployed between field sensors and the CAN backbone, the DSC reduces system BOM by eliminating a separate CAN controller. Hardware message filtering offloads the CPU, preserving headroom for control loops - a practical benefit versus software-only CAN implementations on smaller MCUs.
推荐
Portable Battery-Powered Sensing
The DSPIC33EP128MU206T-I/MR suits portable and battery-powered sensing equipment through its scalable clock architecture: firmware can switch among the internal fast RC oscillator, primary crystal PLL, and low-power modes to trade throughput against current draw. A typical deployment runs the control loop at reduced clock, then bursts to full performance for ADC sampling and DSP filtering, extending battery life in hand-held meters and wireless sensor units. The 12-bit ADC digitizes analog sensor front ends directly, SPI and I2C connect external converters or RF modules, and the 64-pin QFN package keeps board area compact for enclosure-constrained designs. The 128 KB Flash supports OTA-style field update storage alongside the resident application.
推荐
Automotive-Adjacent Control Systems
Although this ordering code carries the industrial (I) temperature grade rather than full AEC-Q100 qualification, the DSPIC33EP128MU206T-I/MR is widely used in automotive-adjacent systems - telematics retrofits, accessory control modules, and agricultural equipment - where dual CAN 2.0B interfaces meet vehicle network requirements and the USB OTG module supports diagnostics and configuration via laptop connection. The 12-bit ADC reads actuator feedback, output-compare modules drive valves and relays with PWM, and the 128 KB Flash stores diagnostics logs across power cycles in the 16 KB RAM-backed architecture. Designs must independently verify environmental derating beyond the industrial range; for full automotive qualification, consult Microchip's automotive-qualified dsPIC33EP variants.
推荐
推荐产品汇总
工程参考数据： DSPIC33EP128MU206T-I/MR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | DSPIC33EP128MU206-I/MR | DSPIC33EP256MU206T-I/MR | DSPIC33EP64MU206T-I/MR | DSPIC33EP128GM306T-I/MR |
|---|---|---|---|---|---|
| Package | 64-pin QFN (MR) | 64-pin QFN (MR) - same | 64-pin QFN (MR) - same | 64-pin QFN (MR) - same | 64-pin QFN (MR) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 128 KB | 128 KB | 256 KB | 64 KB | 128 KB |
| USB OTG | Yes (full-speed) | Yes (full-speed) | Yes (full-speed) | Yes (full-speed) | No |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
| Packaging Format | Tape & Reel (3300/reel) | Tray/Tube | Tape & Reel | Tape & Reel | Tape & Reel |
关键差异点
- Integrated full-speed USB 2.0 OTG （对比 DSPIC33EP128GM306T-I/MR)
- 256 KB Flash drop-in upgrade （对比 DSPIC33EP256MU206T-I/MR)
- Cost-optimized memory sizing （对比 DSPIC33EP256MU206T-I/MR)
设计说明
The dsPIC33EP family operates from a single 3.0V-3.6V supply with internal voltage regulation for the core; provide a local 10 uF bulk plus 0.1 uF ceramic capacitor at each VDD/VDDCORE pin per the manufacturer's recommended decoupling network in the family datasheet. Estimated: keep supply trace impedance low so core transients during 70 MIPS execution do not sag VDDCORE below regulation - a rule of thumb is one 0.1 uF cap per VDD pin plus a 10 uF reservoir within 5 mm of the chip. Failure to decouple the core pin commonly manifests as intermittent reset during DSP-intensive loops.
The 64-pin QFN (MR) has an exposed thermal pad that must be soldered to a grounded copper pour - it is also the device's primary ground return. Define a 3x3 or 5x5 via array under the pad to the internal ground plane, use solder mask defined or non-solder-mask defined pads per Microchip's QFN layout application note, and keep the USB D+/D- traces as a 90-ohm differential pair with length matching within 1 mm. Place the crystal and its load capacitors within 3 mm of the OSC pins with a guard ground ring.
Three frequent issues with dsPIC33EP MU20x designs: (1) leaving the USB OTG module's VBUS sensing configuration unset causes enumeration failures even when USB wiring is correct - configure the VBUS divider or comparator per the USB chapter of the family reference manual; (2) mixing peripheral pin select (PPS) assignments for UART/SPI can silently conflict on shared RP pins - always verify the PPS map against the 64-pin pinout table; (3) the T suffix denotes tape-and-reel only - ordering the non-T tray version changes manufacturing handling, not functionality.
合规信息
Verified web data does not include compliance declarations for this ordering code. The I suffix denotes industrial temperature grade, not AEC-Q100 automotive qualification. Confirm RoHS/REACH certificates on Microchip's official product page before regulatory-critical shipments.
