DSPIC33FJ32MC104-E/TL - 16-bit DSC 32KB Flash Motor Control | Microchip
料号： DSPIC33FJ32MC104-E/TL ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
DSPIC33FJ32MC104-E/TL 概述
A digital signal controller combines the computational throughput of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, a DSC sits above a general-purpose MCU for control-loop-intensive tasks such as field-oriented motor control, where deterministic interrupt latency and hardware PWM units are essential. The dsPIC33F family occupies this niche with a modified Harvard 16-bit architecture, DSP multiply-accumulate instructions, and peripherally-integrated control peripherals.
Key features include dual MCPWM motor-control PWM modules with complementary outputs and dead-time insertion, a Charge Time Measurement Unit (CTMU) for capacitive touch and precision timing, Peripheral Pin Select (PPS) for flexible pin mapping, three analog comparators, a Real-Time Clock and Calendar (RTCC), and a 10-bit ADC with simultaneous sampling capability suited to current-shunt feedback in motor drives.
Architecturally, the dsPIC33F core executes C-compiler-friendly code at up to 16 MIPS (approximately 40 MHz FRC or external crystal operation, with internal PLL), providing fixed-point DSP instructions including MAC and dual operand fetch, which enables single-shunt or three-shunt FOC algorithms to close current loops at 10-20 kHz switching frequencies with margin to spare.
Typical applications include BLDC and PMSM motor drives, power factor correction converters, digital UPS and inverter control, and embedded capacitive-touch user interfaces, where the combination of hardware MCPWM, CTMU and extended-temperature rating fits cost-sensitive industrial designs.
Design consideration: this 3.3V device requires clean decoupling on all VDD/VDDCORE pin pairs and correct configuration of the MCLR and PGEC/PGED programming pair; verify the silicon errata document (DS80000549B) before committing to production layouts.
This page synthesizes verified distributor data, drop-in family alternatives, and design guidance not found together in the manufacturer datasheet.
直接替换替代料： DSPIC33FJ32MC104-E/TL ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： DSPIC33FJ32MC104-E/TL （相同外形与封装尺寸） ——差异在于 Package, Motor Control PWM, Operating Temperature, RTCC, Core.
快速对比工具——选择替代料号进行并排对比：
DSPIC33FJ32MC104-I/TL
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
DSPIC33FJ32MC104-E/PT
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$2.45 / 个
查看数据手册 →DSPIC33FJ32MC102T-I/TL
✅ 直接替换✓ 有现货
$3.2 / 个
查看数据手册 →DSPIC33FJ32MC101T-I/SO
✅ 直接替换✓ 有现货
$3.32 / 个
查看数据手册 →DSPIC33FJ32MC104-E/TL 最大额定值与电气特性
| Core Architecture | 16-bit dsPIC33F DSC |
| Max MIPS | 16 MIPS |
| Flash Memory | 32 KB |
| SRAM | 2 KB |
| 电源电压 | 3.0 V to 3.6 V (3.3 V nominal) |
| Motor Control PWM | MCPWM modules with complementary outputs and dead-time |
| Analog Comparators | 3 |
| CTMU | Yes (Charge Time Measurement Unit) |
| Peripheral Pin Select | Yes (PPS) |
| RTCC | Yes |
| 工作温度 | -40C to +125C (E grade) |
| 封装 | 44-pin TQFP (VTLA, exposed pad) |
| 安装类型 | Surface Mount |
| Programming Interface | ICSP via PGEC3/PGED3 pair |
| Peripherals | MCPWM, CTMU, PPS, comparators, RTCC, ADC, UART, SPI, I2C |
| RoHS 状态 | Compliant |
DSPIC33FJ32MC104-E/TL 44-pin tqfp (vtla, exposed pad) 引脚配置指南
DSPIC33FJ32MC104-E/TL（44-pin tqfp (vtla, exposed pad) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： DSPIC33FJ32MC104-E/TL.
请参阅 数据手册 以查看完整引脚配置。
典型应用
DSPIC33FJ32MC104-E/TL 适用于 6 应用s: BLDC Motor Drives, PMSM Field-Oriented Control, Power Factor Correction Converters, Digital UPS and Inverters, Capacitive Touch User Interfaces, Automotive-Adjacent Actuator Control.
BLDC Motor Drives
The DSPIC33FJ32MC104-E/TL fits sensorless and sensored BLDC drives because its MCPWM modules generate complementary three-phase outputs with hardware dead-time insertion, removing software timing risk at 20 kHz switching frequencies. The 16 MIPS dsPIC33F core executes trapezoidal or FOC commutation loops with DSP MAC instructions, while the 10-bit ADC samples the DC-bus shunt synchronized to PWM centers for low-noise current feedback. The extended -40C to +125C rating suits sealed motor housings where self-heating is significant. Using PPS, current-sense amplifier outputs and comparator trips route to optimal pins, and hardware comparators can implement cycle-by-cycle overcurrent shutdown without CPU intervention.
推荐
PMSM Field-Oriented Control
For PMSM FOC, the DSPIC33FJ32MC104-E/TL closes current loops at 10-20 kHz using its DSP engine: 16 MIPS throughput with single-cycle MAC supports Clarke/Park transforms and two PI current controllers in a 50-100 us loop period with margin. MCPWM complementary outputs with programmable dead-time protect the inverter bridge, and center-aligned PWM minimizes current ripple. The 32KB flash accommodates full FOC plus position estimation or hall decoding with room for communication stacks. Per the Motor Control Plug-in Module sheet (DS-52096a), debugging uses the PGEC3/PGED3 pair, enabling real-time loop tuning through MPLAB X data monitoring during prototype bring-up.
推荐
Power Factor Correction Converters
In switch-mode PFC stages, the DSPIC33FJ32MC104-E/TL implements average-current-mode or critical-conduction control using its high-speed ADC, analog comparators and MCPWM. The 16 MIPS core executes the voltage and current compensation loops digitally, while hardware comparators provide fast overcurrent limiting independent of software latency - a critical safety function when the MOSFET bridge can fail within microseconds. PPS allows the zero-cross detection input to map flexibly, and the CTMU can monitor auxiliary quantities. The extended temperature grade suits power supplies in industrial cabinets where ambient plus self-heating approaches 100C, and the small 44-pin TQFP keeps controller footprint minimal in dense PSU layouts.
推荐
Digital UPS and Inverters
Single-phase UPS and inverter designs benefit from the DSPIC33FJ32MC104-E/TL's ability to generate SPWM or grid-synchronized output waves while managing battery charging. The MCPWM modules produce complementary half-bridge drive at carrier frequencies of 16-20 kHz, and the 10-bit ADC samples output voltage, inductor current and battery terminals in a single sweep synchronized to the PWM period. The RTCC provides time-stamping for event logging and charge scheduling without an external RTC. With 32KB flash, both inverter control and charging state machines fit with space for serial communication. The -40C to +125C rating supports outdoor telecom power cabinets experiencing wide thermal swings.
推荐
Capacitive Touch User Interfaces
The on-chip CTMU (Charge Time Measurement Unit) turns the DSPIC33FJ32MC104-E/TL into a single-chip motor control plus capacitive-touch HMI solution, eliminating a separate touch controller in appliance and power-tool products. The CTMU measures pad capacitance via constant-current charge timing, and the 10-bit ADC reads the result; scanning several keys fits in a low-priority background task alongside the motor control loop thanks to the 16 MIPS budget. PPS maps touch channels to convenient pins on the 44-pin TQFP. Combining touch HMI and drive control on one certified MCU also simplifies safety documentation compared with a two-chip architecture, an approach Microchip demonstrates in its mTouch reference designs.
推荐
Automotive-Adjacent Actuator Control
While this part is not AEC-Q100 qualified, its extended -40C to +125C operating range makes the DSPIC33FJ32MC104-E/TL appropriate for industrial and agricultural equipment exposed to engine-bay-adjacent temperatures, such as pump drives, throttle actuators and HVAC blower controllers in off-highway vehicles. The MCPWM with dead-time drives the H-bridge, comparators implement hardware overcurrent trips, and the CTMU can detect wiring faults or connector presence via charge-time sensing. The 44-pin TQFP with exposed pad improves thermal dissipation into the PCB, supporting higher continuous drive currents. Designers requiring formal automotive qualification should evaluate Microchip's dedicated automotive dsPIC33C parts instead.
推荐
推荐产品汇总
工程参考数据： DSPIC33FJ32MC104-E/TL ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | DSPIC33FJ32MC104-I/TL | DSPIC33FJ32MC104-E/PT | DSPIC33FJ32MC102T-I/TL |
|---|---|---|---|---|
| Package | 44-pin TQFP (VTLA, /TL) | 44-pin TQFP (VTLA) - same | 44-pin TQFP - same footprint | 44-pin TQFP (VTLA) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash | 32 KB | 32 KB | 32 KB | 32 KB |
| SRAM | 2 KB | 2 KB | 2 KB | 2 KB |
| Max MIPS | 16 MIPS | 16 MIPS | 16 MIPS | 16 MIPS |
| Operating Temperature | -40C to +125C (E) | -40C to +85C (I) | -40C to +125C (E) | -40C to +85C (I) |
| CTMU / RTCC | Yes / Yes | Yes / Yes | Yes / Yes | Yes / Yes |
关键差异点
- Extended -40C to +125C temperature rating （对比 DSPIC33FJ32MC104-I/TL)
- Full motor-control PWM provision （对比 DSPIC33FJ32MC102T-I/TL)
- CTMU on-chip touch measurement （对比 DSPIC33FJ32GP204-E/PT)
设计说明
Connect all VDD/VDDCORE/AVDD pin pairs to a 3.3V rail, each with a 100 nF ceramic capacitor placed within 2 mm of the pin, plus one 4.7-10 uF bulk capacitor per supply domain. The 44-pin VTLA exposed pad should be soldered to a grounded copper island with an array of thermal vias; this is not optional electrical grounding only - it carries device heat and improves ADC accuracy by lowering die temperature. Follow the family datasheet (DS70000652F) power connection diagrams exactly.
Review the dsPIC33FJ32MC104 Family Silicon Errata and Data Sheet Clarification document (DS80000549B) before layout freeze - the family datasheet itself notes functional deviations. In particular, confirm PPS remap assignments against errata, never float MCLR (tie via 10 kOhm pull-up with 100 nF for ICSP), and remember that PGEC3/PGED3 is the programming pair used on the Motor Control Plug-in Module (DS-52096a); routing these pins to a header is mandatory for field firmware updates.
The device runs from a single 3.0-3.6V supply with internal regulators (VDDCORE capacitor per datasheet). Estimated power dissipation is modest: 16 MIPS typical active current is in the tens of mA range per the family datasheet, so junction rise is dominated by I/O and PWM driver loads rather than the core. Keep MCPWM output series gate resistors sized so total package dissipation stays well inside the TQFP exposed-pad thermal capability; verify against the datasheet electrical characteristics tables rather than assuming.
Keep PWM output traces short and route them away from analog sensing lines feeding the 10-bit ADC; synchronize ADC sampling to the PWM period-center interrupt to sample motor current when switching noise is minimal. Use the on-chip comparators for cycle-by-cycle overcurrent trip so fault response does not depend on software latency. Ground analog reference (AVSS/AVDD) as a quiet island using a star or split-plane topology per the datasheet's ADC layout guidance.
合规信息
RoHS-compliant, lead-free Microchip production part. Not AEC-Q100 qualified - the -E extended temperature grade is industrial-grade. For formal REACH/halogen declarations consult Microchip environmental documentation.
