EFM32TG108F16-QFN24T - 32MHz ARM Cortex-M3 MCU | Silicon Labs
料号: EFM32TG108F16-QFN24T ✓ 量产中EFM32TG108F16-QFN24T 概述
An energy-efficient microcontroller is a semiconductor designed to execute control logic while minimizing energy consumption during active and low-power operation. The EFM32 family belongs to the hierarchy of microcontroller, embedded processor, and low-power semiconductor. Its combination of Cortex-M3 processing, fast wake-up behavior, and multiple sleep states supports systems that must respond quickly while conserving energy between external events.
Key device features include a maximum CPU frequency of 32 MHz, 16 KB of Flash, 4 KB of RAM, 17 digital I/O pins, and two 16-bit timers. The manufacturer datasheet also identifies autonomous peripherals, high analog integration, and energy-saving modes as central platform characteristics. These resources make the device suitable for compact sensors, portable instruments, industrial controls, and connected accessories that need more capability than an 8-bit controller.
The EFM32TG architecture places the ARM Cortex-M3 processor within a highly integrated low-power platform. Flash supports firmware storage, RAM supports working state and stacks, and the timer resources support periodic measurement, timing, and control functions. According to the Silicon Labs EFM32TG data sheet, devices in this family can consume as little as 0.6 µA in Stop mode and approximately 150 µA/MHz in Run mode, providing useful benchmarks when comparing battery life and duty-cycled operation.
Typical applications include battery-powered sensor nodes, wearable accessories, industrial condition-monitoring equipment, building controls, and portable measurement products. In these systems, the 17 I/O pins can connect digital sensors or control signals, while the two 16-bit timers can implement timing tasks. The 24-QFN package also reduces board area compared with larger leaded or exposed-outline packages, although its compact dimensions require careful PCB layout and thermal assessment.
For PCB design, use the manufacturer's QFN land pattern and route the exposed thermal pad as specified in the datasheet. Keep decoupling capacitors close to the supply pins and provide clean grounding because high-frequency clocking and switching activity can couple into sensitive analog measurements. Verify the exact pin assignment in the package drawing before routing because QFN perimeter pads are closely spaced and exposed-pad connections must follow the recommended land geometry.
This product page combines the manufacturer specifications, device-family positioning, application guidance, package considerations, and qualified same-footprint alternatives. It is intended to help engineers evaluate the EFM32TG108F16-QFN24T for low-power embedded designs before completing footprint, firmware, and supply-chain reviews.
直接替换替代料: EFM32TG108F16-QFN24T ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: EFM32TG108F16-QFN24T (相同外形与封装尺寸) ——差异在于 Flash Memory, Package, Digital I/O Pins, Processor Core, Product Type.
EFM32TG108F16-D-QFN24T
✅ 直接替换📋 参考替代料(不在目录中)
EFM32TG108F8-QFN24T
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →EFM32TG110F16-QFN24T
✅ 直接替换📋 参考替代料(不在目录中)
EFM32ZG108F16-QFN24T
✅ 直接替换📋 参考替代料(不在目录中)
EFM32TG108F16-QFN24T 最大额定值与电气特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB |
| Flash Organization | 16K × 8 |
| RAM | 4 KB |
| Digital I/O Pins | 17 pins |
| Timers | 2 × 16-bit timers |
| Supply Voltage Range | 1.85 V to 3.8 V |
| 封装 | 24-QFN, 5 mm × 5 mm |
| 安装类型 | Surface mount |
| Stop Mode Current | 0.6 µA |
| Run Mode Current | 150 µA/MHz |
| Processor Core | ARM Cortex-M3 |
| AES Hardware Accelerator | No |
EFM32TG108F16-QFN24T 24-qfn, 5 mm × 5 mm 引脚配置指南
EFM32TG108F16-QFN24T(24-qfn, 5 mm × 5 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: EFM32TG108F16-QFN24T.
请参阅 数据手册 以查看完整引脚配置。
典型应用
EFM32TG108F16-QFN24T 适用于 6 应用s: Battery-Powered Sensor Nodes, Industrial Condition Monitoring, Wearable Accessories, Portable Measurement Products, Building Control and Automation, Connected Accessories.
Battery-Powered Sensor Nodes
The EFM32TG108F16-QFN24T fits compact battery-powered sensor nodes because its Cortex-M3 core operates up to 32 MHz while the family can consume as little as 0.6 µA in Stop mode. A sensor controller can sleep between measurements, wake quickly, sample through the integrated peripherals, and transmit a result using one of the 17 digital I/O pins. The 16 KB Flash and 4 KB RAM are sufficient for compact protocols and modest data buffering. At approximately 150 µA/MHz in Run mode, active-duty-cycle planning can materially affect battery life, so firmware should minimize processor time and use peripheral operation where possible.
推荐
Industrial Condition Monitoring
The EFM32TG108F16-QFN24T is appropriate for industrial condition-monitoring equipment that combines local sensing, periodic sampling, and event-driven communications. Its two 16-bit timers can support accurate periodic timing, while 17 digital I/O pins provide connections to sensors, indicators, and control signals. The 32 MHz Cortex-M3 core has enough performance for protocol handling and local filtering without an external processor. For factory equipment, the compact 24-QFN 5 mm × 5 mm footprint saves board area, while the 1.85 V to 3.8 V supply range supports low-voltage industrial rails. Validate the production temperature grade against the installation environment before deployment.
推荐
Wearable Accessories
The EFM32TG108F16-QFN24T suits wearable accessories where board area and battery consumption are primary constraints. Its 24-QFN 5 mm × 5 mm package occupies little PCB space, while the low-power architecture supports Stop-mode operation between user interactions. The 17 digital I/O pins can drive haptic indicators, simple controls, and external sensors, and the two 16-bit timers can organize periodic sampling or timeout functions. With 16 KB of Flash and 4 KB of RAM, the device is best suited to compact control tasks rather than large local data stores. A low-leakage regulator and careful antenna isolation are important when the accessory includes wireless communication.
推荐
Portable Measurement Products
The EFM32TG108F16-QFN24T can serve as the control core in portable meters and measurement instruments where a 32-bit processor, compact package, and flexible timing resources are advantageous. The two 16-bit timers can support pulse counting, sampling intervals, and timeout functions, while the 17 GPIO pins can operate displays, switches, and external analog front ends. Its energy-saving modes are valuable in handheld instruments that remain active intermittently. The 4 KB RAM can support short acquisition buffers, although applications requiring extended histories should select a higher-memory member. Layout should separate sensitive analog and sensor traces from the Cortex-M3 clock and digital return paths.
推荐
Building Control and Automation
The EFM32TG108F16-QFN24T is well matched to compact building-control nodes that monitor switches, contactors, or environmental sensors and communicate status over a low-speed bus. Its 17 I/O pins provide practical control and sensing capacity, while its two 16-bit timers can manage scanning intervals and timed outputs. The low-power platform supports long-duration duty cycling in controls that remain powered continuously but perform limited work between events. The 24-QFN package simplifies compact board layouts, although exposed-pad layout and copper thermal capacity must follow the manufacturer recommendation. Firmware should confirm that the selected communication peripheral and pin multiplexing are available on the chosen device variant.
推荐
Connected Accessories
The EFM32TG108F16-QFN24T can act as the low-power companion controller in connected accessories where a radio or sensor module handles data transfer. The microcontroller manages local control, debouncing, status indication, and data preparation while retaining 16 KB of Flash and 4 KB of RAM for application logic. Its 17 GPIO pins and two 16-bit timers simplify interface management, and the ability to reach 0.6 µA in Stop mode supports long standby periods. Because digital clocking and switching can disturb sensitive analog channels, the QFN exposed pad and supply return should be laid out symmetrically. The selected communication interface must also be mapped to pins exposed by the 24-QFN package.
推荐
推荐产品汇总
工程参考数据: EFM32TG108F16-QFN24T ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EFM32TG108F16-D-QFN24T | EFM32TG108F32-QFN24T | EFM32TG108F8-QFN24T | EFM32TG110F16-QFN24T | EFM32ZG108F16-QFN24T |
|---|---|---|---|---|---|---|
| Package | 24-QFN (5x5) | 24-QFN (5x5) | 24-QFN (5x5) | 24-QFN (5x5) | 24-QFN (5x5) | 24-QFN (5x5) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Flash Memory | 16 KB | 16 KB | 32 KB | 8 KB | 16 KB | 16 KB |
| RAM | 4 KB | 4 KB | 8 KB | 2 KB | 4 KB | 4 KB |
| Special Features | Low-power modes, fast wake-up, and autonomous peripherals | Related D-grade configuration | Higher-memory configuration | Lower-memory configuration | Expanded TG110 peripheral configuration | Later EFM32ZG family configuration |
关键差异点
- Lower memory configuration within the same 24-QFN family (对比 EFM32TG108F32-QFN24T)
- Higher memory ceiling for firmware growth (对比 EFM32TG108F8-QFN24T)
- Established 17-I/O configuration for compact control designs (对比 EFM32TG110F16-QFN24T)
设计说明
Use the 24-QFN land pattern, exposed-pad dimensions, and paste recommendation shown in the Silicon Labs EFM32TG data sheet. Place the device-side bypass capacitor immediately beside the supply pin and its ground return rather than routing the return through peripheral circuitry. The QFN perimeter pads are tightly spaced, so use the manufacturer’s solder mask and paste geometry rather than designing a generic 24-pad footprint from visual inspection.
Plan the power tree for a 1.85 V to 3.8 V device supply and include margin for the actual I/O voltage. Keep the MCU supply free from large switching transients, and place bulk and high-frequency decoupling close to the relevant pins. If a regulator supplies the MCU, account for its startup behavior and ensure the processor’s supply remains within limits during ramp-up, brownout, and peripheral wake transitions.
Preserve a continuous return path beneath the exposed pad and connect it according to the package drawing. Keep the 32 MHz clock route short, avoid routing it beside precision analog inputs, and provide an uninterrupted ground reference for the QFN footprint. In measurement applications, separate sensor and analog grounds from digital return currents where the system architecture permits; otherwise use careful partitioning and filtering at the analog interface.
Do not select a related EFM32 MPN solely because it uses a 24-QFN package. Confirm the 24 exposed perimeter pins, exposed-pad connection, power pins, debug pins, reset behavior, and every peripheral signal against the manufacturer pin tables. EFM32TG108F8 and EFM32TG108F32 change memory capacity, while EFM32TG110 and EFM32ZG108 belong to different device configurations; firmware and peripheral requirements must also be reviewed.
合规信息
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for this exact ordering code. AEC-Q100 is not applicable to this general-purpose microcontroller.