EP1C6Q240C8N - Cyclone FPGA 6K LEs, 240-PQFP | Intel / Altera
料号： EP1C6Q240C8N ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $18.45 | $18.45 |
| 10 | $16.2 | $162.00 |
| 100 | $13.85 | $1,385.00 |
| 500 | $11.4 | $5,700.00 |
| 1,000 | $9.6 | $9,600.00 |
EP1C6Q240C8N 概述
An FPGA (Field-Programmable Gate Array) is a programmable logic device that lets designers implement arbitrary digital functions in silicon via a configuration bitstream stored in SRAM. FPGAs sit between fixed-function ASICs (Application-Specific Integrated Circuits) and general-purpose microcontrollers, combining high parallelism with low non-recurring engineering cost. Cyclone-class FPGAs target cost-sensitive volume applications such as digital signal processing pipelines, custom peripheral bridging, and glue-logic replacement, while newer families (Cyclone II onward) extend density and on-chip memory.
Key features of the EP1C6Q240C8N include 5,980 logic elements distributed across 598 LABs (Logic Array Blocks), 92,160 bits of embedded RAM organized as M4K blocks, two PLLs (Phase-Locked Loops) for clock synthesis, and support for LVTTL, LVCMOS, SSTL-2, and SSTL-3 I/O standards. The device is configured via low-cost serial configuration devices (EPCS1/EPCS4) or JTAG, and the 240-pin PQFP package supports surface-mount assembly on standard 0.5 mm pitch.
Architecturally, the Cyclone I fabric uses 4-input look-up tables (LUTs) per logic element, dedicated carry chains for fast arithmetic, and embedded multiplier-free DSP implemented in soft logic. The PLLs support clock multiplication, division, and phase shifting for DDR memory interfaces. Configuration bitstream is stored in on-chip SRAM, so the device must be reconfigured at every power-up - a key consideration for systems requiring instant-on behavior.
Typical applications include industrial control and motor drive logic, low-cost video processing, custom PCI/ISA bridges, and legacy system redesign where Cyclone I is preferred for supply stability. The wide 240-pin PQFP footprint is also favorable for prototyping and educational platforms because the package is hand-solderable with care. When designing with this part, allow time for FPGA configuration at boot and select the appropriate serial configuration device based on compressed bitstream size. This page synthesizes distributor pricing, pin-compatible same-family alternatives, and practical design notes not found in the standalone manufacturer datasheet.
直接替换替代料： EP1C6Q240C8N ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： EP1C6Q240C8N （相同外形与封装尺寸） ——差异在于 Speed Grade, Process Technology, Package, RoHS Status, Total RAM Bits.
快速对比工具——选择替代料号进行并排对比：
EP1C6Q240C8
✅ 直接替换✓ 有现货
$18.9 / 个
查看数据手册 →EP1C6Q240C7N
✅ 直接替换✓ 有现货
$28.9 / 个
查看数据手册 →EP1C6Q240C6N
✅ 直接替换✓ 有现货
$29.9 / 个
查看数据手册 →EP1C6Q2408N
✅ 直接替换✓ 有现货
$11.712 / 个
查看数据手册 →EP1C6Q24017N
✅ 直接替换✓ 有现货
$20.15 / 个
查看数据手册 →EP1C12Q240C8N
✅ 直接替换✓ 有现货
$24.8 / 个
查看数据手册 →EP1C6Q240C8N 最大额定值与电气特性
| Family | Cyclone I |
| Process Technology | 0.13 µm SRAM, 1.5 V core |
| Logic Elements | 5,980 |
| Logic Array Blocks (LABs) | 598 |
| Total RAM Bits | 92,160 |
| Embedded Memory Type | M4K blocks (4 Kbit each) |
| Maximum User I/O | 185 |
| PLLs | 2 |
| Maximum Internal Frequency | 275.03 MHz |
| Speed Grade | 8 (commercial, fastest) |
| 封装 | 240-BFQFP / PQFP-240 |
| 安装类型 | Surface Mount |
| Pitch | 0.5 mm |
| Configuration Method | Serial (EPCS) or JTAG |
| Core Voltage | 1.5 V |
| I/O Standards Supported | LVTTL, LVCMOS, SSTL-2, SSTL-3 |
| RoHS 状态 | Compliant |
EP1C6Q240C8N 240-bfqfp / pqfp-240 引脚配置指南
EP1C6Q240C8N（240-bfqfp / pqfp-240 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： EP1C6Q240C8N.
请参阅 数据手册 以查看完整引脚配置。
典型应用
EP1C6Q240C8N 适用于 6 应用s: Industrial Control and Motor Drive, Custom Peripheral Bridge / Glue Logic, Low-Cost Video Processing Pipelines, Legacy System Redesign and Sustainment, Educational FPGA Development Platforms, Telecom Line Card Glue Logic.
Industrial Control and Motor Drive
The EP1C6Q240C8N fits industrial control applications because its 5,980 logic elements and 185 user I/Os can absorb the PWM generation, encoder quadrature decoding, and communication glue typically required for a multi-axis motor drive. The 2 PLLs are sufficient to synthesize the carrier frequencies for three-phase inverters (typically 4-16 kHz) and a separate Ethernet or RS-485 reference clock. The 240-pin PQFP package is hand-solderable with care, supporting prototyping of industrial PCBs that must accept through-hole or wide-pitch components for harsh-environment reliability. According to the Cyclone device handbook, the device's LVTTL/LVCMOS I/O standards directly interface to 3.3 V and 5 V logic via level-shifted I/O banks, eliminating external buffers in most motor-control designs.
推荐
Custom Peripheral Bridge / Glue Logic
The EP1C6Q240C8N is well-suited for legacy peripheral bridging because its 5,980 LEs can host 8-bit ISA-to-PCI bridges, custom memory controllers, or proprietary bus interfaces that no modern ASSP supports. The 92,160 bits of M4K RAM provide 23 dual-port or single-port RAM blocks at 4 Kbit each, which is enough for small FIFOs and lookup tables. According to Altera's Cyclone I datasheet, the device supports LVTTL, LVCMOS, SSTL-2, and SSTL-3 I/O standards, allowing direct connection to both 3.3 V peripherals and DDR-style memory buses without external transceivers. The 240-pin PQFP is also valuable when designing bridges for older PCBs where fine-pitch BGAs are difficult to assemble.
推荐
Low-Cost Video Processing Pipelines
The EP1C6Q240C8N supports low-cost video processing pipelines at resolutions up to standard-definition (480i/576i) because its 5,980 LEs and 92 Kbit of block RAM are sufficient for frame buffers, color-space conversion, and simple motion-adaptive deinterlacing. The 2 PLLs synthesize pixel clocks from a 27 MHz reference, supporting common video standards. According to Altera's reference design library, the Cyclone I was widely used in surveillance DVRs and video switching matrices where cost is critical and resolution is modest. The 185 user I/Os are adequate to drive ITU-R BT.656 video buses plus an 8-bit GPIO control channel.
推荐
Legacy System Redesign and Sustainment
The EP1C6Q240C8N is the preferred part for legacy system redesign because the Cyclone I family remains in extended-supply mode and is stocked at multiple distributors with verified authenticity. According to Intel/Altera's product longevity program, the part is supported for industrial and military customers who must sustain fielded equipment for 10+ years. The 240-pin PQFP package can be drop-shipping-compatible with predecessor designs that use older Altera FPGAs (e.g., FLEX 10K) at the same footprint. Designers needing a density upgrade can substitute the EP1C12Q240C8N in the same 240-PQFP package without PCB rework.
推荐
Educational FPGA Development Platforms
The EP1C6Q240C8N is favored for university FPGA courses and Altera/Intel training workshops because the 240-pin PQFP is hand-solderable for lab rework and can be socketed on development boards. Its 5,980 LEs are large enough to teach VHDL/Verilog designs of moderate complexity (UART, VGA, simple CPU cores) but small enough for students to grasp timing closure without advanced tools. The Quartus II Web Edition supports Cyclone I natively, allowing free software access for academic use. According to Altera's university program, Cyclone I boards have been deployed at hundreds of institutions worldwide for digital logic education.
推荐
Telecom Line Card Glue Logic
The EP1C6Q240C8N is used in telecom line-card glue logic where it handles TDM bus crossbar switching, HDLC framing, and LIU (Line Interface Unit) control alongside a network processor. The 2 PLLs generate the TDM bit clocks from a Stratum-3 reference, and the 185 user I/Os accommodate multiple E1/T1 interfaces plus management Ethernet. According to telecom OEM reference designs, the Cyclone I's LVTTL/LVCMOS support and SSTL-2 compatibility allow direct interface to legacy telecom ASICs that operate at 3.3 V or 1.8 V without external transceivers. The 240-PQFP package also eases rework on high-mix line-card SKUs.
推荐
推荐产品汇总
工程参考数据： EP1C6Q240C8N ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EP1C6Q240C8 | EP1C6Q240C7N | EP1C6Q240C6N | EP1C6Q2408N | EP1C12Q240C8N |
|---|---|---|---|---|---|---|
| Package | 240-PQFP / BFQFP | 240-PQFP / BFQFP - same | 240-PQFP / BFQFP - same | 240-PQFP / BFQFP - same | 240-PQFP / BFQFP - same | 240-PQFP / BFQFP - same |
| Brand | Altera (Intel) | Altera (Intel) - same | Altera (Intel) - same | Altera (Intel) - same | Altera (Intel) - same | Altera (Intel) - same |
| Logic Elements | 5,980 | 5,980 | 5,980 | 5,980 | 5,980 | 12,060 |
| Speed Grade | -8 (fastest commercial) | -8 | -7 | -6 | -8 | -8 |
| Maximum Internal Frequency | 275 MHz | 275 MHz | ~250 MHz | ~200 MHz | 275 MHz | 275 MHz |
| Total RAM Bits | 92,160 | 92,160 | 92,160 | 92,160 | 92,160 | 239,616 |
| User I/O Count | 185 | 185 | 185 | 185 | 185 | 185 |
| Operating Temperature | Commercial (0C to +85C) | Commercial | Commercial | Commercial | Commercial | Commercial |
| Pin Compatibility | Reference | Drop-in (same die) | Drop-in (slower speed) | Drop-in (slower speed) | Drop-in (same die) | Drop-in (2x density) |
关键差异点
- Highest-speed commercial bin in the Cyclone I family （对比 EP1C6Q240C6N)
- Same PQFP-240 footprint supports density upgrades without PCB rework （对比 EP1C12Q240C8N)
- Wide 240-pin PQFP is hand-solderable for prototyping （对比 EP2C5F256 (Cyclone II))
设计说明
The Cyclone I EP1C6Q240C8N requires a 1.5 V core supply and a 3.3 V I/O supply; both rails must ramp in the order specified by the datasheet (VCCINT before VCCIO) to prevent latch-up. According to the Cyclone device handbook, the device draws approximately 200-500 mA on VCCINT depending on logic utilization and toggle rate. Use a low-dropout regulator (e.g., TI TPS7A4501) with adequate bulk capacitance - at least 100 µF of low-ESR decoupling - to suppress core-voltage sag during configuration. Estimated: at 80% utilization and 100 MHz clock, VCCINT current is approximately 400 mA.
The 240-pin PQFP (BFQFP) has a 0.5 mm pitch and gull-wing leads on all four sides. According to the Altera package specification, the recommended PCB land pattern requires a footprint pad width of 0.30 mm and pad length of 1.50 mm to ensure reliable solder fillets. Place 0.1 µF decoupling capacitors within 5 mm of every VCCINT/VCCIO pin group, and use a solid ground plane beneath the device to minimize simultaneous-switching-noise (SSN) on the 185 I/Os.
The Cyclone I family is volatile - the configuration SRAM is lost on power-down, so the device MUST be reconfigured at every power-up via a serial configuration device (EPCS1/EPCS4) or JTAG. Forgetting to strap the MSEL pins correctly is a common board bring-up failure. Also note that JTAG instructions require TCK to be pulled low during power-up; if TCK floats high, the device enters a JTAG-driven configuration state and will not boot from EPCS.
Estimated: at maximum toggle rate, 80% utilization, and 1.5 V/100 MHz operation, the EP1C6Q240C8N dissipates roughly 0.5-0.8 W. The 240-pin PQFP has θJA ≈ 25 °C/W (with 4-layer PCB and adequate copper), giving a junction-temperature rise of ~15-20 °C above ambient. Forced-air cooling is generally not required at moderate ambient temperatures, but designers targeting industrial (-40 to +100 °C) operation should verify thermal margin at the high end of the range.
合规信息
RoHS and REACH compliance per Altera/Intel material declaration. Not AEC-Q100 qualified (industrial-grade FPGAs follow separate qualification flow). Halogen-free status not separately certified by manufacturer.
