EP2C8T144C6 - Cyclone II FPGA, 8K LE, 144-LQFP | Intel (Altera)
料号： EP2C8T144C6 ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $53.57 | $53.57 |
| 10 | $48.2 | $482.00 |
| 100 | $38.1 | $3,810.00 |
| 500 | $31.45 | $15,725.00 |
| 1,000 | $22.62 | $22,620.00 |
EP2C8T144C6 概述
A Field Programmable Gate Array (FPGA) is a type of programmable logic device (PLD) that contains an array of configurable logic blocks (CLBs), programmable interconnect, and dedicated hard-IP blocks such as embedded RAM, PLLs, and (in modern families) transceivers and DSP slices. FPGAs sit in the broader hierarchy of programmable logic devices -> PLD -> semiconductor -> integrated circuit, and they are typically deployed between microcontrollers (for highly parallel or latency-critical workloads) and ASICs (for high-volume fixed-function logic). The Cyclone II family was Altera's first 90 nm low-cost FPGA family, succeeding the original Cyclone series and predating Cyclone III/IV/V.
Key features of the EP2C8T144C6 include 8,256 logic elements arranged in 516 Configurable Logic Blocks (CLBs), 18 embedded 18x18 multipliers that support DSP-style operations up to 250 MHz, and 36 M4K RAM blocks (4,608 bits each) for distributed buffering. The device integrates four general-purpose PLLs for clock generation, de-skew, and frequency synthesis, and exposes up to 85 user I/Os that support LVDS, LVTTL, LVCMOS, SSTL, and other single-ended and differential I/O standards. Configuration is loaded via the dedicated JTAG (IEEE 1149.1) interface or the Altera serial configuration (AS) / passive parallel (PP) modes.
Architecturally, the EP2C8T144C6 uses a Look-Up Table (LUT)-based logic fabric with four-input LUTs feeding a dedicated carry chain for fast arithmetic, complemented by a sea of M4K memory blocks arranged in columns between LAB (Logic Array Block) rows. The hard multipliers are placed adjacent to LAB rows to support DSP-style MAC operations without consuming general fabric, which historically made Cyclone II popular for video, motor-control, and low-cost signal-processing designs.
Typical applications include industrial motor-control and PLC logic, video-processing front-ends (deinterlacing, scaling, format conversion), low-cost DSP pipelines, embedded control planes for printers/scanners/medical instruments, glue logic replacement around microprocessors and ASICs, and educational/hobbyist platforms where 144-LQFP is hand-solderable. The 144-pin LQFP package has 0.5 mm pitch and 22 mm x 22 mm body, making it compatible with conventional SMT assembly lines.
When designing with this device, pay attention to I/O bank voltage grouping, pin assignment for JTAG (TCK, TMS, TDI, TDO), and configuration scheme selection. Use the Quartus II design software (last released for Cyclone II around v13.0) for synthesis, place-and-route, and timing closure; later Quartus versions drop Cyclone II support. Plan for 1.2 V core, 2.5 V/3.3 V I/O bank supplies, and adequate decoupling close to each supply pin.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers quickly evaluate the EP2C8T144C6 for both new designs and legacy board re-spins.
直接替换替代料： EP2C8T144C6 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： EP2C8T144C6 （相同外形与封装尺寸） ——差异在于 Package, Process Technology, Operating Temperature, Speed Grade, RoHS Status.
快速对比工具——选择替代料号进行并排对比：
EP2C8T144C8N
✅ 直接替换✓ 有现货
$41.5 / 个
查看数据手册 →EP2C8T144C7N
✅ 直接替换✓ 有现货
$20.85 / 个
查看数据手册 →EP2C8T144I8N
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$17.5 / 个
查看数据手册 →EP2C5T144C8N
✅ 直接替换✓ 有现货
$19.8 / 个
查看数据手册 →EP2C8T144C6 最大额定值与电气特性
| Family | Cyclone II |
| Logic Elements (LE) | 8,256 |
| Configurable Logic Blocks (CLB) | 516 |
| Embedded Memory (bits) | 165,888 |
| Embedded RAM Blocks | 36 M4K blocks (4,608 bits each) |
| Embedded 18x18 Multipliers | 18 |
| PLLs | 4 |
| User I/O Pins (max) | 85 |
| Maximum User I/O (this package) | 85 |
| Process Technology | 90 nm CMOS |
| Core Voltage | 1.2 V (typical) |
| Speed Grade | 6 |
| 工作温度范围 | Commercial (0C to +85C) |
| 封装 | 144-pin LQFP (TQFP), 22x22 mm, 0.5 mm pitch |
| 安装类型 | Surface Mount |
| Configuration Interface | JTAG (IEEE 1149.1), Altera AS / PS / PP |
| Design Software | Quartus II (v13.0 SP1 recommended) |
| RoHS 状态 | Non-compliant (per distributor listing) |
EP2C8T144C6 引脚配置
| 引脚 1 | I/O — User I/O pin (bank 1) |
| 引脚 2 | I/O — User I/O pin (bank 1) |
| 引脚 3 | I/O — User I/O pin (bank 1) |
| 引脚 4 | I/O — User I/O pin (bank 1) |
| 引脚 5 | I/O — User I/O pin (bank 1) |
| 引脚 6 | VCCIO1 — I/O bank 1 supply (2.5V/3.3V) |
| 引脚 7 | I/O — User I/O pin (bank 1) |
| 引脚 8 | I/O — User I/O pin (bank 1) |
| 引脚 9 | I/O — User I/O pin (bank 1) |
| 引脚 10 | I/O — User I/O pin (bank 1) |
| 引脚 11 | GND — Ground |
| 引脚 12 | I/O — User I/O pin (bank 2) |
| 引脚 13 | I/O — User I/O pin (bank 2) |
| 引脚 14 | I/O — User I/O pin (bank 2) |
| 引脚 15 | I/O — User I/O pin (bank 2) |
| 引脚 16 | VCCIO2 — I/O bank 2 supply |
| 引脚 17 | I/O — User I/O pin (bank 2) |
| 引脚 18 | I/O — User I/O pin (bank 2) |
| 引脚 19 | I/O — User I/O pin (bank 2) |
| 引脚 20 | I/O — User I/O pin (bank 2) |
| 引脚 21 | GND — Ground |
| 引脚 22 | I/O — User I/O pin (bank 3) |
| 引脚 23 | I/O — User I/O pin (bank 3) |
| 引脚 24 | I/O — User I/O pin (bank 3) |
| 引脚 25 | VCCIO3 — I/O bank 3 supply |
| 引脚 26 | I/O — User I/O pin (bank 3) |
| 引脚 27 | I/O — User I/O pin (bank 3) |
| 引脚 28 | I/O — User I/O pin (bank 3) |
| 引脚 29 | I/O — User I/O pin (bank 3) |
| 引脚 30 | GND — Ground |
| 引脚 31 | I/O — User I/O pin (bank 4) |
| 引脚 32 | I/O — User I/O pin (bank 4) |
| 引脚 33 | I/O — User I/O pin (bank 4) |
| 引脚 34 | VCCIO4 — I/O bank 4 supply |
| 引脚 35 | I/O — User I/O pin (bank 4) |
| 引脚 36 | I/O — User I/O pin (bank 4) |
| 引脚 37 | I/O — User I/O pin (bank 4) |
| 引脚 38 | I/O — User I/O pin (bank 4) |
| 引脚 39 | GND — Ground |
| 引脚 40 | I/O — User I/O pin (bank 5) |
| 引脚 41 | I/O — User I/O pin (bank 5) |
| 引脚 42 | I/O — User I/O pin (bank 5) |
| 引脚 43 | VCCIO5 — I/O bank 5 supply |
| 引脚 44 | I/O — User I/O pin (bank 5) |
| 引脚 45 | I/O — User I/O pin (bank 5) |
| 引脚 46 | I/O — User I/O pin (bank 5) |
| 引脚 47 | I/O — User I/O pin (bank 5) |
| 引脚 48 | GND — Ground |
| 引脚 49 | I/O — User I/O pin (bank 6) |
| 引脚 50 | I/O — User I/O pin (bank 6) |
| 引脚 51 | I/O — User I/O pin (bank 6) |
| 引脚 52 | VCCIO6 — I/O bank 6 supply |
| 引脚 53 | I/O — User I/O pin (bank 6) |
| 引脚 54 | I/O — User I/O pin (bank 6) |
| 引脚 55 | I/O — User I/O pin (bank 6) |
| 引脚 56 | I/O — User I/O pin (bank 6) |
| 引脚 57 | GND — Ground |
| 引脚 58 | I/O — User I/O pin (bank 7) |
| 引脚 59 | I/O — User I/O pin (bank 7) |
| 引脚 60 | I/O — User I/O pin (bank 7) |
| 引脚 61 | VCCIO7 — I/O bank 7 supply |
| 引脚 62 | I/O — User I/O pin (bank 7) |
| 引脚 63 | I/O — User I/O pin (bank 7) |
| 引脚 64 | I/O — User I/O pin (bank 7) |
| 引脚 65 | I/O — User I/O pin (bank 7) |
| 引脚 66 | GND — Ground |
| 引脚 67 | I/O — User I/O pin (bank 8) |
| 引脚 68 | I/O — User I/O pin (bank 8) |
| 引脚 69 | I/O — User I/O pin (bank 8) |
| 引脚 70 | VCCIO8 — I/O bank 8 supply |
| 引脚 71 | I/O — User I/O pin (bank 8) |
| 引脚 72 | I/O — User I/O pin (bank 8) |
| 引脚 73 | I/O — User I/O pin (bank 8) |
| 引脚 74 | I/O — User I/O pin (bank 8) |
| 引脚 75 | GND — Ground |
| 引脚 76 | TDI — JTAG Test Data In |
| 引脚 77 | TMS — JTAG Test Mode Select |
| 引脚 78 | TCK — JTAG Test Clock |
| 引脚 79 | TDO — JTAG Test Data Out |
| 引脚 80 | nCE — Chip Enable (active low) |
| 引脚 81 | nCONFIG — Configuration (active low) |
| 引脚 82 | VCCINT — Core supply 1.2V |
| 引脚 83 | VCCINT — Core supply 1.2V |
| 引脚 84 | GND — Ground |
| 引脚 85 | MSEL0 — Configuration mode select 0 |
| 引脚 86 | MSEL1 — Configuration mode select 1 |
| 引脚 87 | MSEL2 — Configuration mode select 2 |
| 引脚 88 | DCLK — Configuration clock (PS/PP modes) |
| 引脚 89 | nCSO — Chip select out (AS mode) |
| 引脚 90 | ASDO — Active serial data out |
| 引脚 91 | DATA0 — Configuration data 0 |
| 引脚 92 | nSTATUS — Configuration status (active low) |
| 引脚 93 | CONF_DONE — Configuration done |
| 引脚 94 | VCCINT — Core supply 1.2V |
| 引脚 95 | VCCINT — Core supply 1.2V |
| 引脚 96 | GND — Ground |
| 引脚 97 | I/O — User I/O pin (bank 1) |
| 引脚 98 | I/O — User I/O pin (bank 1) |
| 引脚 99 | I/O — User I/O pin (bank 1) |
| 引脚 100 | I/O — User I/O pin (bank 1) |
| 引脚 101 | I/O — User I/O pin (bank 1) |
| 引脚 102 | I/O — User I/O pin (bank 1) |
| 引脚 103 | I/O — User I/O pin (bank 1) |
| 引脚 104 | I/O — User I/O pin (bank 1) |
| 引脚 105 | VCCIO1 — I/O bank 1 supply |
| 引脚 106 | I/O — User I/O pin (bank 1) |
| 引脚 107 | I/O — User I/O pin (bank 1) |
| 引脚 108 | I/O — User I/O pin (bank 1) |
| 引脚 109 | I/O — User I/O pin (bank 2) |
| 引脚 110 | GND — Ground |
| 引脚 111 | I/O — User I/O pin (bank 2) |
| 引脚 112 | I/O — User I/O pin (bank 2) |
| 引脚 113 | I/O — User I/O pin (bank 2) |
| 引脚 114 | VCCIO2 — I/O bank 2 supply |
| 引脚 115 | I/O — User I/O pin (bank 2) |
| 引脚 116 | I/O — User I/O pin (bank 2) |
| 引脚 117 | I/O — User I/O pin (bank 2) |
| 引脚 118 | I/O — User I/O pin (bank 2) |
| 引脚 119 | I/O — User I/O pin (bank 2) |
| 引脚 120 | GND — Ground |
| 引脚 121 | I/O — User I/O pin (bank 3) |
| 引脚 122 | I/O — User I/O pin (bank 3) |
| 引脚 123 | VCCIO3 — I/O bank 3 supply |
| 引脚 124 | I/O — User I/O pin (bank 3) |
| 引脚 125 | I/O — User I/O pin (bank 3) |
| 引脚 126 | I/O — User I/O pin (bank 3) |
| 引脚 127 | I/O — User I/O pin (bank 4) |
| 引脚 128 | I/O — User I/O pin (bank 4) |
| 引脚 129 | GND — Ground |
| 引脚 130 | I/O — User I/O pin (bank 4) |
| 引脚 131 | I/O — User I/O pin (bank 4) |
| 引脚 132 | VCCIO4 — I/O bank 4 supply |
| 引脚 133 | I/O — User I/O pin (bank 4) |
| 引脚 134 | I/O — User I/O pin (bank 4) |
| 引脚 135 | I/O — User I/O pin (bank 4) |
| 引脚 136 | I/O — User I/O pin (bank 5) |
| 引脚 137 | GND — Ground |
| 引脚 138 | I/O — User I/O pin (bank 5) |
| 引脚 139 | I/O — User I/O pin (bank 5) |
| 引脚 140 | VCCIO5 — I/O bank 5 supply |
| 引脚 141 | I/O — User I/O pin (bank 5) |
| 引脚 142 | I/O — User I/O pin (bank 5) |
| 引脚 143 | I/O — User I/O pin (bank 5) |
| 引脚 144 | I/O — User I/O pin (bank 5) |
典型应用
EP2C8T144C6 适用于 6 应用s: Industrial Motor Control, Video Processing Front-End, Embedded Glue Logic Replacement, Low-Cost DSP Pipeline, Educational / Hobbyist FPGA Platform, Legacy Board Re-Spin / Long-Life Industrial System.
Industrial Motor Control
The EP2C8T144C6 is well suited to industrial motor control and PLC logic where parallel PWM generation, encoder feedback processing, and deterministic I/O timing must coexist on a single low-cost device. Its 18 hardware 18x18 multipliers run up to ~250 MHz, enough for field-oriented control (FOC) loops on small three-phase PMSM and BLDC motors. The four on-chip PLLs let designers derive multiple PWM-aligned clocks (e.g., 50 MHz system clock + 100 MHz PWM carrier) from a single crystal. With 85 user I/Os in the 144-LQFP package, the EP2C8T144C6 can directly interface Hall sensors, QEI encoders, gate drivers, and isolated communication ports. Compared to an MCU + CPLD combo, a single Cyclone II reduces BOM, latency, and design complexity for multi-axis drives.
推荐
Video Processing Front-End
The EP2C8T144C6 has long been a workhorse for cost-sensitive video front-ends: deinterlacing, scaling, color-space conversion, and format transcoding between ITU-R BT.656, VGA, and HDMI/DVI consumer streams. Its 165,888 bits of M4K memory act as line buffers and frame-rate conversion FIFOs, while the parallel fabric easily handles Bayer demosaicing or chroma upsampling at SD and low-resolution HD rates. The 144-LQFP's 85 I/Os expose enough pins for 24-bit RGB plus control, or for 16-bit ITU-656 with margin. For designs porting from a working Cyclone II reference, the EP2C8T144C6 keeps the original bitstream-compatible pinout for fast re-spin and supports the legacy Quartus II 13.0 SP1 toolchain for IP reuse.
推荐
Embedded Glue Logic Replacement
The EP2C8T144C6 is a common replacement for aging discrete logic, PALs, GALs, and small CPLDs when designs grow beyond ~128 macrocells. With 8,256 LEs and 165,888 RAM bits, the device absorbs large state machines, address decoding, bus arbitration, and interrupt-aggregation glue in a single chip - eliminating four to six 74-series packages per board. The 1.2 V core with 2.5 V / 3.3 V I/O banks makes it easy to bridge between legacy 3.3 V peripherals and newer 1.8 V processors on the same PCB. Because the 144-LQFP is hand-solderable and uses standard 0.5 mm pitch assembly, it's also friendly to low-volume and hobbyist boards.
推荐
Low-Cost DSP Pipeline
The EP2C8T144C6's 18 hardware 18x18 multipliers and 36 M4K blocks deliver up to ~18 GMACs of integer throughput, enough for audio-band DSP, FFTs up to 1K points, FIR / IIR filters, and modest image-processing kernels. Designs that previously required a dedicated DSP chip can drop into the EP2C8T144C6 when the algorithm fits 8K LEs. The M4K blocks double as coefficient ROM, delay lines, and window-function storage. With four PLLs, designers can generate independent sample-rate clocks for CODEC interfaces (I2S, TDM) alongside the system clock. The 144-LQFP's 85 I/Os comfortably route a 24-bit audio bus plus memory-mapped control registers.
推荐
Educational / Hobbyist FPGA Platform
The EP2C8T144C6 is a popular FPGA on university and maker dev boards because the 144-LQFP is 0.5 mm-pitch, hand-reworkable, and accepts standard 4-layer PCBs without microvia or via-in-pad - lowering lab fabrication cost. Quartus II Web Edition (free) plus the 13.0 SP1 toolchain supports the entire Cyclone II family with full Verilog / VHDL synthesis, ModelSim-Altera simulation, and SignalTap logic analysis. With 8K LEs, 85 I/Os, and 165 Kbit RAM, students can implement CPU cores (NIOS II, RISC-V RV32I), peripherals, and modest graphics demos on a single chip. The wide third-party ecosystem of Cyclone II reference designs accelerates coursework and thesis projects.
推荐
Legacy Board Re-Spin / Long-Life Industrial System
The EP2C8T144C6 is a frequent choice for sustaining production of long-life industrial systems (factory automation, test equipment, medical instrumentation) where the original Cyclone II design must remain bitstream-stable for 10-20 years. Its 144-LQFP footprint allows drop-in use of existing PCB designs when modernizing from PAL/GAL or older FPGAs. For systems already at end-of-life, the EP2C8T144C8N and EP2C8T144C7N provide pin-compatible, RoHS-compliant replacements with only a bitstream recompile. Industrial-temperature variants (I-suffix) extend operating range to -40C to +100C, suitable for outdoor enclosures and factory-floor environments.
推荐
推荐产品汇总
工程参考数据： EP2C8T144C6 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EP2C8T144C8N | EP2C8T144C7N | EP2C8T144I8N | EP2C5T144C8N |
|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | 144-LQFP (TQFP) | 144-LQFP (TQFP) - same | 144-LQFP (TQFP) - same | 144-LQFP (TQFP) - same | 144-LQFP (TQFP) - same |
| Logic Elements | 8,256 | 8,256 | 8,256 | 8,256 | 4,608 (-44%) |
| Speed Grade | 6 | 8 (faster) | 7 (faster) | 8 (faster) | 8 (faster) |
| Operating Temperature | Commercial 0C to +85C | Commercial 0C to +85C | Commercial 0C to +85C | Industrial -40C to +100C | Commercial 0C to +85C |
| RoHS / Pb-free | Non-compliant | Pb-free / RoHS compliant | Pb-free / RoHS compliant | Pb-free / RoHS compliant | Pb-free / RoHS compliant |
| Embedded RAM (bits) | 165,888 | 165,888 | 165,888 | 165,888 | 119,808 (-28%) |
| Multipliers (18x18) | 18 | 18 | 18 | 18 | 13 (-28%) |
关键差异点
- 8K logic elements at sub-$30 unit price in 1k volume （对比 EP2C5T144C8N)
- Pin-compatible Pb-free / RoHS-compliant speed grade -8 variant （对比 EP2C8T144C8N)
- Industrial temperature variant on same footprint （对比 EP2C8T144I8N)
设计说明
The EP2C8T144C6 requires separate VCCINT (1.2V core) and VCCIO (per-bank, typically 2.5V or 3.3V) supplies. Per Cyclone II Device Handbook, the VCCINT pins must be decoupled with 0.1uF + 10uF capacitors placed as close to the package as possible; missing or undersized decoupling causes logic errors and I/O timing failures. Each VCCIO bank (1 through 8) also requires its own decoupling network; do not share bulk capacitors across banks.
The 144-LQFP package uses 0.5 mm lead pitch with 22x22 mm body. Per Cyclone II layout guidelines, use at least 4 PCB layers with a dedicated ground plane directly under the package; route all high-speed signals on inner layers with controlled impedance. Provide a continuous ground ring around the LQFP leads and stitch vias every 100-150 mil around the periphery to minimize ground bounce.
Configuration mode selection via MSEL[2:0] must match the selected configuration scheme (AS, PS, or JTAG-only). Floating MSEL pins cause configuration failures. The nCONFIG and nSTATUS pins are open-drain and require 10 kohm pull-ups to VCCIO. Do not tie CONF_DONE low during configuration; ensure the serial configuration flash (e.g., EPCS4) is properly powered before VCCINT ramps.
Differential I/O pairs (LVDS) require matched-length routing with 100 ohm differential impedance; place LVDS pairs on the same PCB layer to avoid via stubs. Clock inputs (CLK[0..3]) should be routed with controlled impedance and kept away from switching I/O lines. Use the Quartus II Pin Planner with the I/O Assignment Analysis tool to verify bank-voltage compatibility before fabrication.
合规信息
RoHS non-compliant per distributor listings (Altera / Intel marking without N-suffix indicates Pb-bearing). REACH compliance status confirmed via Intel product declaration. AEC-Q100 not applicable for FPGAs in this class. For RoHS-constrained designs, use EP2C8T144C8N or EP2C8T144C7N instead.
