EP3SL340F1517C2 - Stratix III L FPGA, 337.5K LE, FCBGA-1517 | Altera
料号： EP3SL340F1517C2 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $4250 | $4,250.00 |
| 10 | $3995 | $39,950.00 |
| 100 | $3650 | $365,000.00 |
| 500 | $3350 | $1,675,000.00 |
| 1,000 | $3050 | $3,050,000.00 |
EP3SL340F1517C2 概述
An FPGA (Field Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs), embedded memory blocks, DSP blocks, and programmable I/Os interconnected by a routed fabric. FPGAs occupy the programmable logic layer of the broader semiconductor hierarchy: FPGA -> programmable logic -> digital IC -> integrated circuit. Unlike fixed-function ASICs, FPGAs are post-fabrication reprogrammable, enabling rapid prototyping, hardware acceleration, and design iteration.
Key features of the EP3SL340F1517C2 include 13,500 Logic Array Blocks (LABs), dedicated 18x18 multipliers, high-speed transceivers, and hard memory controllers. The device targets -40C to +100C commercial operating range (C2 suffix indicates 0C to +85C commercial grade per Stratix III nomenclature) and supports flexible I/O standards including LVDS, LVCMOS, and HSTL on the 976 user I/O pins.
The Stratix III L architecture uses an adaptive logic module (ALM) that packs combinational and register logic more efficiently than older 4-input LUT architectures, and a Partial Reconfiguration region manager that allows on-the-fly bitstream swapping. Compared with the Stratix II predecessor, the L family cuts dynamic power by up to 50 percent through programmable power technology that gates unused logic and routing.
Typical applications include high-end wireline telecom line cards, software-defined radio baseband processing, ASIC prototyping platforms, broadcast video processing, and high-frequency trading accelerators. The 1517-ball FCBGA package supports dense signal breakout for high-pin-count system designs.
When designing with this FPGA, ensure your PCB supports the FCBGA-1517 land pattern with proper microvia stack-up and matched-impedance routing. The Quartus II design suite is the official toolchain for synthesis, place-and-route, and bitstream generation, and is mandatory for configuration file compatibility.
This page synthesizes distributor pricing, Stratix III L family alternatives, and practical PCB layout guidance not found in the manufacturer datasheet alone.
直接替换替代料： EP3SL340F1517C2 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： EP3SL340F1517C2 （相同外形与封装尺寸） ——差异在于 Package, Operating Temperature, Speed Grade, Embedded Memory Bits, Mounting Type.
快速对比工具——选择替代料号进行并排对比：
EP3SL340F1517C2N
✅ 直接替换✓ 有现货
$13200 / 个
查看数据手册 →EP3SL340F1517C3
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →EP3SL340F1517C4
✅ 直接替换✓ 有现货
$3300 / 个
查看数据手册 →EP3SL340F1517C4N
✅ 直接替换✓ 有现货
$7044.96 / 个
查看数据手册 →EP3SL340F1517C7N
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
EP4SE340F1517C2
✅ 直接替换📋 参考替代料（不在目录中）
EP3SL340F1517C2 最大额定值与电气特性
| Family | Stratix III L |
| Logic Elements | 337,500 |
| Logic Array Blocks (LABs) | 13,500 |
| Embedded Memory Bits | 18,822,144 (approx. 22.4 Mbit) |
| User I/Os | 976 |
| Maximum Operating Frequency | 600 MHz |
| Process Technology | 65 nm |
| Core Voltage (Vccint) | 1.1 V |
| 封装 | 1517-ball FCBGA |
| 安装类型 | Surface Mount |
| 工作温度 | 0C to +85C (Commercial grade C2) |
| Speed Grade | C2 |
| Lead-Free / RoHS | Compliant |
| MSL 等级 | 3 |
| Manufacturer | Altera (now Intel FPGA) |
EP3SL340F1517C2 1517-ball fcbga 引脚配置指南
EP3SL340F1517C2（1517-ball fcbga 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： EP3SL340F1517C2.
请参阅 数据手册 以查看完整引脚配置。
典型应用
EP3SL340F1517C2 适用于 7 应用s: ASIC Prototyping Platform, Telecom Line Card Processing, Software-Defined Radio Baseband, Broadcast Video Processing, High-Frequency Trading Accelerators, Medical Imaging Accelerator, Industrial Automation Control.
ASIC Prototyping Platform
The EP3SL340F1517C2's 337,500 logic elements and 18.8 Mbit embedded memory provide enough capacity to map full SoC ASIC RTL onto a single device. Engineers partition the ASIC into multiple FPGAs using this part as the high-density master, with the FCBGA-1517 footprint supporting hundreds of I/Os needed to bridge between FPGAs. Compared with smaller Cyclone V parts, the EP3SL340F1517C2 supports multi-million-gate ASIC prototypes with a single chip, reducing board complexity. Quartus II synthesis and the Standard Pin-out File format enable seamless migration from prototype to production silicon.
推荐
Telecom Line Card Processing
Wireline telecom line cards use the EP3SL340F1517C2 for packet classification, traffic shaping, and high-throughput forward-error-correction engines. Its 600 MHz core clock and embedded DSP blocks implement multi-channel Reed-Solomon and Viterbi decoders at wire speed. The 976 user I/Os accommodate parallel SFI/XFI interfaces and backplane SerDes channels. Compared with ASIC line-card solutions, the FPGA allows post-deployment algorithm updates - critical when chasing evolving telecom standards like OTU4 and FlexE.
推荐
Software-Defined Radio Baseband
Software-defined radio (SDR) platforms rely on the EP3SL340F1517C2 to implement wideband multi-standard baseband processing including LTE, WiMAX, and proprietary waveforms. The device's hard multipliers support FFT engines and channelization filters at real-time rates, while the embedded memory holds tap coefficients and sample buffers. With 18.8 Mbit on-chip RAM, designers avoid external memory fetches in the inner loops. The FPGA outperforms typical DSP processors by 10-100x on parallel FIR/FFT kernels.
推荐
Broadcast Video Processing
Broadcast video infrastructure uses the EP3SL340F1517C2 for real-time 4K/UHD video processing, color-space conversion, scaling, and frame-rate conversion. The device handles multiple SDI streams simultaneously using its high I/O count and embedded memory as line buffers. Compared with GPU-based video pipelines, the FPGA approach delivers deterministic latency and frame-accurate output - essential for live broadcast contribution links. Quartus II video IP cores accelerate development.
推荐
High-Frequency Trading Accelerators
High-frequency trading (HFT) platforms leverage the EP3SL340F1517C2 for FPGA-based market-data feed handling and order-book processing with sub-microsecond latency. The 1.1 V core and Stratix III L low-power architecture minimize dynamic power, allowing dense FPGA compute farms in air-cooled racks. Hard PCIe Gen2 endpoints connect directly to host servers. Compared with CPU-only HFT stacks, FPGA accelerators reduce decision latency from microseconds to nanoseconds - the decisive edge in modern market microstructure.
推荐
Medical Imaging Accelerator
The EP3SL340F1517C2 powers CT, MRI, and ultrasound image reconstruction pipelines where beamforming, back-projection, and FIR filtering must execute at real-time rates. Its embedded memory bandwidth accommodates streaming pixel data from high-speed ADC front-ends, and the DSP blocks accelerate iterative reconstruction algorithms. Compared with discrete DSP farms, a single EP3SL340F1517C2 replaces multiple processor cards while reducing system latency and power - critical for portable and bedside diagnostic imaging systems.
推荐
Industrial Automation Control
The EP3SL340F1517C2 serves as the central controller for complex industrial automation cells requiring deterministic multi-axis motion control, EtherCAT/CAN-FD bridging, and machine-vision preprocessing. With 976 user I/Os, the FPGA interfaces directly to dozens of encoders, ADCs, and PWM outputs without external I/O expanders. Compared with PLC-based controllers, the FPGA delivers deterministic sub-microsecond cycle times essential for high-speed pick-and-place and semiconductor wafer-handling robots. Industrial temperature variants (I3/I4 speed grade) extend operating range to -40C to +100C.
推荐
推荐产品汇总
工程参考数据： EP3SL340F1517C2 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EP3SL340F1517C2N | EP3SL340F1517C3 | EP3SL340F1517C4 | EP3SL340F1517C4N | EP4SE340F1517C2 |
|---|---|---|---|---|---|---|
| Package | 1517-ball FCBGA | 1517-ball FCBGA | 1517-ball FCBGA | 1517-ball FCBGA | 1517-ball FCBGA | 1517-ball FCBGA |
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Logic Elements | 337,500 | 337,500 | 337,500 | 337,500 | 337,500 | 340,000 |
| Speed Grade | C2 | C2 | C3 | C4 | C4 | C2 |
| Operating Temperature | 0C to +85C (Commercial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) |
| User I/Os | 976 | 976 | 976 | 976 | 976 | 976 |
| Process / Core Voltage | 65 nm / 1.1 V | 65 nm / 1.1 V | 65 nm / 1.1 V | 65 nm / 1.1 V | 65 nm / 1.1 V | 40 nm / 0.9 V |
| Max Frequency (approx.) | 600 MHz | 600 MHz | ~625 MHz | ~650 MHz | ~650 MHz | ~850 MHz |
关键差异点
- Highest-density Stratix III L variant in the FCBGA-1517 package （对比 EP3SL200F1517I4N)
- Low-power 65 nm architecture compared with later-generation FPGAs （对比 EP4SE340F1517C2)
- Pin-compatible upgrade path from C2 to C4 speed grade （对比 EP3SL340F1517C4)
设计说明
The FCBGA-1517 package requires a high-density PCB stack-up with microvia (laser-drilled) technology for inner-layer fan-out. Standard 4-layer FR-4 is insufficient; design for at least 8 layers with 1 oz copper and matched 50-ohm impedance on high-speed transceiver pairs. Decoupling capacitor selection is critical: use 0402-size 0.1 uF and 10 uF ceramics distributed beneath the device following the reference capacitor map in the Stratix III pin-out file. Estimated: power delivery network impedance target is below 5 mOhm at 100 MHz to handle simultaneous switching noise from 976 I/Os.
At full logic utilization (337,500 LE switching) and 600 MHz operation, junction power can approach 25-30 W. The FCBGA-1517 package has a theta_JC of approximately 0.15 C/W and requires a forced-air heatsink plus thermal interface material. Estimated: with a 4 m/s airflow and a properly attached heatsink, junction-to-ambient thermal resistance is approximately 1.2 C/W, yielding a temperature rise of 36 C above ambient at 30 W. For passive cooling, consider the -I3 or -I4 speed grade variants at slightly lower clock frequencies.
Do not mix Quartus II versions across team members when targeting this device; bitstream compatibility breaks between major Quartus versions. Verify the configuration mode (Passive Serial, Fast Passive Parallel, or Active Serial) matches the design's configuration PROM or download cable. Most importantly, follow the Stratix III power-sequencing order in chapter 4 of the handbook - mis-sequencing Vccint before Vccpd can cause long-term reliability degradation that may not show up in bench testing but fails in the field within months.
High-speed transceiver channels (if used) require length-matched differential pairs with a skew budget under 5 ps. Use 100-ohm differential impedance and follow the DTR (Documenting the Routing) constraints exported by Quartus II during board layout. Cross-talk mitigation: maintain at least 3W spacing between adjacent TX/RX pairs and avoid routing signals over splits in reference planes. The FCBGA-1517 package's BGA escape routing typically requires blind/buried vias - plan your fabrication house's capabilities early.
合规信息
RoHS compliance per Altera product page. C2 speed grade indicates commercial operating temperature (0C to +85C). AEC-Q100 not applicable for non-automotive FPGA. Intel/Altera maintains conflict-mineral compliance programs.