ICE3PCS03GXUMA1 - 8-Pin CCM PFC Controller, 85-265VAC | Infineon
料号： ICE3PCS03GXUMA1 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $2.85 | $2.85 |
| 10 | $2.55 | $25.50 |
| 100 | $2.1 | $210.00 |
| 500 | $1.75 | $875.00 |
| 1,000 | $1.45 | $1,450.00 |
ICE3PCS03GXUMA1 概述
A Power Factor Correction (PFC) controller is a power management integrated circuit that shapes the input current of an AC/DC converter to be in phase with the input voltage, raising the power factor toward unity and reducing harmonic distortion. Within the broader hierarchy, a PFC controller is a type of AC/DC converter control IC, which sits under power management ICs in the semiconductor taxonomy. CCM operation means the inductor current stays continuously above zero, reducing peak current stress and EMI versus Discontinuous Conduction Mode (DCM) at high power levels.
Key technical features include a low internal reference trimmed at 2.5 V for high-accuracy output voltage regulation, a very low start-up current to minimize standby losses, an integrated digital control voltage loop that eliminates external compensation components, and built-in protection functions including output overvoltage, undervoltage, open-loop, and overcurrent protection. The IC is the third generation of Infineon's CoolSET/PFC family, succeeding the ICE1PCS0x and ICE2PCS0x series with smaller footprint, fewer external parts, and improved light-load efficiency.
Typical applications include 80 PLUS compliant desktop PC SMPS, 100 W to 1 kW industrial switch-mode power supplies, flat-panel TV power supplies, server and telecom rectifiers, LED driver front-end PFC stages, and white-goods inverter power boards. The wide 85-265 VAC input range makes the part suitable for global-market products that must operate from both 115 V and 230 V nominal mains without component changes.
When designing with this controller, place the current-sense resistor between the boost MOSFET source and ground using short, wide traces to avoid switching noise injection. Use a low-ESR X2-rated film capacitor at the rectified mains input, and ensure the gate-drive trace to the external boost MOSFET is kept short to limit parasitic inductance and ringing.
直接替换替代料： ICE3PCS03GXUMA1 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： ICE3PCS03GXUMA1 （相同外形与封装尺寸） ——差异在于 Package, Topology, Control Method, Switching Frequency Range, Internal Reference Voltage.
快速对比工具——选择替代料号进行并排对比：
ICE3PCS03G
✅ 直接替换📋 参考替代料（不在目录中）
ICE3PCS01GXUMA1
✅ 直接替换✓ 有现货
$1.68 / 个
查看数据手册 →ICE2PCS02GXUMA1
✅ 直接替换✓ 有现货
$0.74 / 个
查看数据手册 →NCP1654BD65R2G
✅ 直接替换📋 参考替代料（不在目录中）
L6562AN
✅ 直接替换📋 参考替代料（不在目录中）
ICE3PCS03GXUMA1 最大额定值与电气特性
| 拓扑 | Boost PFC, Continuous Conduction Mode (CCM) |
| 输入电压范围 | 85 VAC to 265 VAC (universal mains) |
| Switching Frequency Range | 21 kHz to 250 kHz (adjustable / externally syncable) |
| Internal Reference Voltage | 2.5 V (trimmed, low offset) |
| Peak Current Limit Threshold | 0.2 V (low, on current-sense resistor) |
| Control Method | Integrated digital voltage-loop control |
| 封装 | PG-DSO-8 (SOIC-8, 3.90 mm body width) |
| 引脚数量 | 8 |
| 安装类型 | Surface Mount |
| Operating Mode | CCM (Continuous Conduction Mode) |
| Protection Features | Output overvoltage, undervoltage, open-loop, overcurrent |
| Synchronization | External sync input supported |
| RoHS 状态 | Compliant |
| Generation | 3rd generation (successor to ICE2PCS0x and ICE1PCS0x) |
| Output Driver | Single gate driver for external boost MOSFET |
ICE3PCS03GXUMA1 引脚配置
| 引脚 1 | VSENSE — Output voltage sense input (feedback from PFC output divider) |
| 引脚 2 | FREQ — Switching frequency setting resistor |
| 引脚 3 | ISENSE — Current sense input (0.2 V peak current limit) |
| 引脚 4 | GND — Ground |
| 引脚 5 | VCC — Supply voltage (IC power) |
| 引脚 6 | GATE — Gate driver output to external boost MOSFET |
| 引脚 7 | COMP — Compensation network node (internal digital loop output) |
| 引脚 8 | SYNC — External frequency synchronization input |
典型应用
ICE3PCS03GXUMA1 适用于 6 应用s: Desktop PC SMPS (80 PLUS), Flat-Panel TV Power Supply, Industrial SMPS (100 W to 1 kW), LED Lighting Driver Front-End, Server & Telecom Rectifier, White Goods Inverter Power Board.
Desktop PC SMPS (80 PLUS)
The ICE3PCS03GXUMA1 is well-suited for 80 PLUS-compliant desktop PC switch-mode power supplies in the 300 W to 800 W range. Its CCM operation with adjustable switching up to 250 kHz enables power factor correction above 0.95 at full load from universal mains input, while the integrated digital control loop eliminates the external compensation network required by older analog PFC ICs. The 2.5 V trimmed reference tightens output-rail accuracy and the 0.2 V current-sense threshold minimizes sense-resistor dissipation, critical for meeting 80 PLUS Gold efficiency targets.
推荐
Flat-Panel TV Power Supply
LCD and OLED TV power supplies typically require a PFC front-end feeding a 400 V bus for the backlight inverter and downstream DC-DC converters. The ICE3PCS03GXUMA1's wide 85-265 VAC input range and SOIC-8 footprint make it ideal for slim TV chassis where board area is constrained. The integrated protection suite, including output overvoltage, undervoltage, and open-loop detection, simplifies TV safety certification while reducing BOM cost. Light-load efficiency is also improved versus the second-generation ICE2PCS0x parts.
推荐
Industrial SMPS (100 W to 1 kW)
Industrial power supplies require robust PFC stages with wide input range and comprehensive fault protection. The ICE3PCS03GXUMA1 delivers CCM PFC for 100 W to 1 kW industrial SMPS used in factory automation, PLCs, and motor drives. The external synchronization feature allows coordinated switching with downstream DC-DC stages, simplifying EMI filter design. The SOIC-8 package and low external component count also reduce assembly cost for high-volume industrial deployments.
推荐
LED Lighting Driver Front-End
High-power LED drivers for street lighting, commercial luminaires, and horticultural fixtures require active PFC to meet regulatory harmonic standards such as EN 61000-3-2. The ICE3PCS03GXUMA1 supports these applications with its 85-265 VAC universal input and 0.95+ power factor capability. The integrated digital control loop maintains stable operation across the LED driver's wide load range, while the SOIC-8 footprint allows compact driver enclosures.
推荐
Server & Telecom Rectifier
Telecom rectifier and server PSU front-ends operate from -48 V battery plants or universal AC mains, requiring high-efficiency PFC stages above 1 kW. The ICE3PCS03GXUMA1's CCM topology and 250 kHz switching capability support interleaved or single-stage PFC designs for these high-power-density applications. The external frequency synchronization feature enables multi-phase interleaving to spread thermal load and reduce input ripple.
推荐
White Goods Inverter Power Board
Variable-frequency drives for washing machines, refrigerators, and dishwashers include a PFC front-end feeding the motor inverter. The ICE3PCS03GXUMA1 in SOIC-8 is well-suited for these cost-sensitive, space-constrained white-goods applications. Its wide input range, integrated protection, and low external component count enable compliance with IEC 61000-3-2 harmonic standards while keeping BOM cost and PCB area minimal.
推荐
推荐产品汇总
工程参考数据： ICE3PCS03GXUMA1 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ICE3PCS03G | ICE3PCS01G | ICE2PCS02G | NCP1654BD65R2G | L6562AN |
|---|---|---|---|---|---|---|
| Package | PG-DSO-8 (SOIC-8) | PG-DSO-8 (SOIC-8) - same | PG-DSO-8 (SOIC-8) - same | PG-DSO-8 (SOIC-8) - same | SOIC-8 - same | SOIC-8 - same |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | onsemi | STMicroelectronics |
| Topology | Boost PFC, CCM | Boost PFC, CCM | Boost PFC, CCM | Boost PFC, CCM | Boost PFC, CCM | Boost PFC, TM (DCM boundary) |
| External Synchronization | Yes (SYNC pin) | Yes (SYNC pin) | Yes (SYNC pin) | No | No | No |
| Integrated Digital Control Loop | Yes | Yes | Yes | No (external compensation) | No (external compensation) | No (external compensation) |
关键差异点
- Third-generation Infineon CCM PFC controller with integrated digital control loop （对比 ICE2PCS02G)
- External frequency synchronization up to 250 kHz （对比 NCP1654BD65R2G (onsemi))
- Universal 85-265 VAC input range with single design （对比 L6562AN (STMicroelectronics, transition-mode))
设计说明
Place the current-sense resistor (R_sense) between the boost MOSFET source and ground using a short, wide Kelvin-sense trace to the ISENSE pin. Keep the high-current loop area (rectifier bridge, boost inductor, boost MOSFET, sense resistor) minimal to reduce EMI. The ISENSE trace should be referenced to the analog ground plane and routed away from the GATE driver trace to avoid switching-noise injection that can false-trigger the 0.2 V current limit.
Estimated VCC supply decoupling: place a 100 nF ceramic bypass capacitor as close as possible to the VCC pin (pin 5), with a 10 uF electrolytic or tantalum bulk capacitor on the same node. The VCC rail must be derived from an auxiliary winding on the boost inductor or from an external trickle-charge circuit; undervoltage lockout at the VCC threshold prevents the IC from operating below its minimum supply, which would cause undefined GATE output behavior.
Do not exceed the 0.2 V peak current-limit threshold during transient loads; overshoots above this level will trip protection and cause audible PFC output ripple. For designs above 1 kW, consider interleaving two ICE3PCS03GXUMA1 ICs 180 degrees out of phase using the SYNC pin to reduce input current ripple and shrink the EMI filter. The output overvoltage threshold should be verified against your downstream DC-DC stage's maximum input rating.
Keep the GATE drive trace (pin 6) to the boost MOSFET gate short (under 25 mm preferred) and use a 10 ohm gate resistor to damp ringing. Route the VSENSE divider (pin 1) traces away from the boost inductor to avoid switching-noise coupling. Use a guard ring or via fence around the VSENSE and COMP traces if they must cross noisy regions, and ensure the analog ground and power ground meet at a single point near the sense resistor.
合规信息
RoHS and REACH compliant per Infineon product page. Not AEC-Q100 qualified - this part targets industrial/consumer SMPS, not automotive.
