IW612HN/A1CMP - Wi-Fi 6 + BT 5.4 + 802.15.4 Tri-Radio | NXP
料号： IW612HN-A1CMP ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
IW612HN-A1CMP 概述
A wireless transceiver IC (radio SoC) belongs to the hierarchy of RF transceivers -> RF & wireless ICs -> wireless communication semiconductors. Combo wireless solutions such as the IW612 integrate multiple radio protocols on one die so that a single chip can serve a broadband link (Wi-Fi), a personal-area link (Bluetooth/BLE) and a mesh low-power link (802.15.4/Thread/Zigbee) simultaneously, which is the foundation of Matter-native smart home and industrial IoT gateways.
Key features include concurrent tri-radio operation, 802.11ax Wi-Fi 6 with OFDMA and MU-MIMO capability for improved network efficiency, Bluetooth 5.4 with LE audio-ready PHYs, and 802.15.4 support for Thread and Zigbee mesh networking. The 2.4 GHz band spans 2400 MHz to 2483.5 MHz and the 5 GHz band spans 5170 MHz to 5895 MHz, per the Arrow.com listing. The high degree of integration yields substantially lower system cost and BOM count compared with multi-chip solutions.
Technically, the IW612 combines the radios, RF front end, baseband, MAC and host interface on a single CMOS die. The exposed-pad VFQFN dual-row package minimizes PCB area and provides low-inductance ground return paths that benefit RF performance. Typical power profiles target ultra-low-power battery and energy-harvesting designs alongside always-on gateway applications.
Typical applications include smart home hubs, smart appliances, smart energy meters, industrial automation nodes, gateways, smart devices and accessories, all of which benefit from concurrent Wi-Fi, BLE and Thread/Zigbee connectivity in one package.
Design consideration: 116-pin dual-row QFN parts require careful PCB stack-up planning; place RF matching networks and crystals per the IW612 datasheet layout guidelines and ensure a solid continuous ground plane under the exposed pad.
This page synthesizes verified distributor listings, the NXP IW612 datasheet reference, and drop-in alternative analysis not found in the manufacturer datasheet alone.
直接替换替代料： IW612HN-A1CMP ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： IW612HN-A1CMP （相同外形与封装尺寸） ——差异在于 Bluetooth Version, Frequency Bands, Wi-Fi Standard.
快速对比工具——选择替代料号进行并排对比：
IW612HN
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
联系询价
查看数据手册 →IW612HN-A1CMP 规格参数
| Product Type | Wi-Fi 6 / Bluetooth 5.4 / 802.15.4 tri-radio transceiver SoC |
| Wi-Fi Standard | Wi-Fi 6 (IEEE 802.11ax), 1x1 dual-band |
| Bluetooth Version | Bluetooth 5.4 / Bluetooth Low Energy (LE) |
| 802.15.4 Support | Yes (Thread / Zigbee) |
| Frequency Bands | 2.4 GHz (2400 MHz to 2483.5 MHz) and 5 GHz (5170 MHz to 5895 MHz) |
| 封装 | 116-VFQFN Dual Rows, Exposed Pad |
| 引脚数量 | 116 |
| 安装类型 | Surface Mount |
| Packaging | Tape & Reel (T/R) |
IW612HN-A1CMP 116-vfqfn dual rows, exposed pad 引脚配置指南
IW612HN-A1CMP（116-vfqfn dual rows, exposed pad 封装）的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据： IW612HN-A1CMP.
请参阅 数据手册 以查看完整引脚配置。
典型应用
IW612HN-A1CMP 适用于 6 应用s: Smart Home Hubs and Gateways, Industrial Automation Nodes, Smart Energy Meters and Infrastructure, Smart Appliances, Wearables and Smart Accessories, Wireless Audio and Edge IoT Gateways.
Smart Home Hubs and Gateways
The IW612HN/A1CMP fits smart home hubs because it provides all three protocols that a Matter-native ecosystem requires on one die: Wi-Fi 6 for broadband cloud connectivity, Bluetooth 5.4/BLE for device commissioning, and 802.15.4 for the Thread mesh that carries device control traffic. In a hub design the chip typically connects to the host processor over its host interface while running concurrent radios; the single-chip integration removes separate BLE and Thread controllers, cutting BOM count and board area. The 5 GHz band (5170-5895 MHz) offloads high-throughput traffic from the congested 2.4 GHz band where the mesh operates, reducing coexistence issues. Power profiles support both mains-powered hubs and battery-backed designs, per the NXP IW612 datasheet product overview.
推荐
Industrial Automation Nodes
Industrial automation nodes benefit from the IW612HN/A1CMP because 802.15.4 mesh provides deterministic, low-power sensor networking while Wi-Fi 6 (802.11ax) with OFDMA handles high-bandwidth data backhaul to plant IT systems, and BLE 5.4 supports commissioning tools and condition-monitoring accessories. In a motor-monitoring or environmental-sensing node, the tri-radio chip can stream diagnostics over Wi-Fi while maintaining a Thread mesh link for fallback control, all from one certified silicon platform. NXP positions the IW612 explicitly for industrial automation per its product page. The 116-VFQFN dual-row exposed-pad package provides the RF grounding quality needed in electrically noisy factory environments, though layout discipline around the exposed pad is critical to meeting range targets.
推荐
Smart Energy Meters and Infrastructure
Smart energy infrastructure is a primary target market named by NXP for the IW612 family. A smart meter or energy gateway needs a local mesh (802.15.4, used by many utility profiles) to talk to neighboring meters and in-home displays, a BLE 5.4 link for commissioning and consumer smartphone interaction, and Wi-Fi 6 to report usage data to the utility cloud. The IW612HN/A1CMP consolidates these into a single chip, reducing qualification effort because one radio platform covers all three regulatory protocol stacks. The dual-band Wi-Fi capability allows operators to select the less-congested 5 GHz band in dense multi-dwelling deployments where 2.4 GHz is saturated, improving report reliability and OTA firmware update windows.
推荐
Smart Appliances
Washers, refrigerators, ovens and HVAC equipment increasingly ship with Wi-Fi for app control, BLE for setup, and Thread for Matter compatibility; the IW612HN/A1CMP serves all three without a multi-chip radio cluster. Appliance control boards are typically cost- and space-constrained, so the single-chip tri-radio integration directly reduces BOM line items and the RF section area, which NXP cites as the key benefit of the IW612's integration level. Wi-Fi 6 (802.11ax) features such as OFDMA improve coexistence in homes crowded with many connected devices, keeping the appliance responsive even under network load. The exposed-pad VFQFN package also aids thermal and RF performance inside metal-adjacent appliance enclosures when designed per the datasheet layout guidance.
推荐
Wearables and Smart Accessories
Smart devices and accessories are explicitly listed by NXP as IW612 target applications. For battery-powered accessories such as remote controls, trackers and wearable companions, the BLE 5.4 radio provides the low-power primary link, while the Wi-Fi 6 radio can be duty-cycled for periodic high-rate syncs (photo/video offload, firmware updates) and 802.15.4 enables accessory-to-mesh interaction in Thread-based smart homes. The 1x1 radio architecture and integrated PMU keep the power budget compatible with small Li-ion cells; the single-chip solution avoids the sleep-current overhead of a discrete Wi-Fi module. Designers should verify datasheet current-consumption figures per radio state against their battery lifetime targets, as absolute numbers are not restated here beyond the datasheet.
推荐
Wireless Audio and Edge IoT Gateways
Edge IoT gateways and wireless audio accessories exploit the IW612HN/A1CMP's concurrent radios: Bluetooth 5.4 handles the audio streaming or device pairing link, Wi-Fi 6 provides the cloud/media transport, and 802.15.4 links the gateway into sensor meshes. In an edge gateway the chip offloads all wireless stacks from the host SoC, freeing CPU headroom for local analytics; this radio-offload architecture is a defining advantage of the single-chip tri-radio design described in the NXP IW612 datasheet. The 5 GHz band support (5170-5895 MHz) is particularly valuable for audio streaming, where the wider channels and cleaner spectrum reduce latency and dropouts versus 2.4 GHz-only designs. Coexistence between the three radios is managed on-chip, simplifying certification.
推荐
推荐产品汇总
工程参考数据： IW612HN-A1CMP ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | IW612HN |
|---|---|---|
| Package | 116-VFQFN Dual Rows, Exposed Pad | 116-VFQFN Dual Rows, Exposed Pad - same |
| Brand | NXP Semiconductors | NXP Semiconductors |
| Wi-Fi Standard | Wi-Fi 6 (802.11ax), 1x1 dual-band | Wi-Fi 6 (802.11ax), 1x1 dual-band |
| Bluetooth | Bluetooth 5.4 / BLE | Bluetooth 5.4 / BLE |
| 802.15.4 Radio | Yes (Thread/Zigbee) | Yes (Thread/Zigbee) |
| Frequency Coverage | 2400-2483.5 MHz / 5170-5895 MHz | 2400-2483.5 MHz / 5170-5895 MHz |
| Packaging Flow | Tape & Reel (/A1CMP suffix) | Per ordering suffix |
关键差异点
- Tri-radio single-chip integration (Wi-Fi 6 + BT 5.4 + 802.15.4) （对比 88W8987)
- Wi-Fi 6 (802.11ax) versus Wi-Fi 5 （对比 88W8987)
- Single 116-VFQFN footprint for all three protocols （对比 IW612HN)
设计说明
The IW612HN/A1CMP is a 116-pin dual-row VFQFN with exposed pad, which is a demanding footprint. Solder the exposed pad to a solid, unbroken ground plane with an array of vias (typ. 0.3 mm drills on a ~1 mm pitch) to provide both RF ground return and heat dissipation. For dual-row QFN fanout, plan blind or buried vias or careful inner-row escape routing on at least a 4-layer stack-up. Follow the IW612 datasheet (nxp.com/docs/en/data-sheet/IW612.pdf) PCB layout section for crystal and RF matching placement.
Keep the 2.4 GHz and 5 GHz matching networks on the component side, directly at the RF pins, with no stubs; route RF traces with controlled impedance (50 ohm) and reference a continuous ground plane. Because the same 2.4 GHz band is shared by Wi-Fi, BLE and 802.15.4 radios, on-chip coexistence handles time-sharing, but external antenna isolation improves mesh throughput when Wi-Fi is active - use a single wideband antenna (e.g., dual-band chip/inverted-F) only after verifying VSWR across both bands.
Do not assume the ordering suffix is interchangeable: IW612HN/A1CMP encodes speed, temperature and packaging flow options. Verify the suffix decode on the NXP IW612HN product page or with your distributor before second-sourcing between suffixes. Also, this part is a raw RF SoC, not a certified module - Wi-Fi/BLE/802.15.4 regulatory certification of the final product remains the integrator's responsibility unless the design reuses an NXP-certified reference design.
合规信息
Compliance status not stated in the provided verified web data; confirm on the NXP IW612HN product page product-status report before procurement.