KSZ8061MNXI-TR - 10/100 Ethernet PHY | Microchip | 32-QFN (Tape & Reel)
料号: KSZ8061MNXI-TR ✓ 量产中KSZ8061MNXI-TR 概述
An Ethernet PHY, or physical-layer transceiver, is the circuit that converts digital Ethernet data into signals suitable for twisted-pair cabling and reconstructs incoming signals for the digital MAC controller. Within the Ethernet hierarchy, the PHY connects the data-link and physical layers, while the MAC handles frame processing and higher-layer software support. The KSZ8061 therefore serves as the physical interface between a network controller and an RJ45-based copper Ethernet connection.
The KSZ8061 family includes Microchip Quiet-WIRE technology, which provides internal filtering intended to reduce line-side EMI. This filtering can simplify magnetics selection and improve signal quality in compact network products. The PHY supports both 10 Mb/s and 100 Mb/s rates, making it suitable for embedded controllers, industrial equipment, access devices, printers, IP telephones, and embedded Ethernet systems that require a compact copper-network interface.
The KSZ8061 integrates the functions required for 10Base-T and 100Base-TX physical signaling, while the host controller supplies the digital Ethernet interface and network-management functions. Its 3.3 V-class operating range is compatible with conventional 3.3 V digital systems when signal levels and power sequencing are designed accordingly. The 32-QFN package reduces board area compared with larger leaded packages and requires careful layout of high-frequency and mixed-signal connections.
Typical implementations place the PHY close to the network connector and route differential transmit and receive pairs according to the manufacturer reference design. The Ethernet magnetics, RJ45 connector, center-tap termination, isolation components, and exposed-pad ground connection all influence signal integrity. Placement should minimize return-path discontinuity and keep high-current or switching nodes away from the differential pairs.
Thermal design should account for dissipation in the PHY, magnetics, and connector assembly rather than relying only on the nominal ambient temperature. Use the exposed pad and its PCB land pattern for heat spreading, provide a low-impedance ground plane, and follow the manufacturer layout and grounding guidance. Confirm final compliance with the applicable EMC and network-interface requirements for the finished product rather than the component alone.
This page combines the exact package and interface information, sourcing guidance, application-focused engineering guidance, and a strict comparison of identified same-package options. It helps engineers determine whether the KSZ8061MNXI-TR fits a 10/100 copper-Ethernet design and how to plan the supporting PCB, magnetics, grounding, and compliance work.
直接替换替代料: KSZ8061MNXI-TR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料KSZ8061MNXI-TR 规格参数
| Product Type | 10Base-T/100Base-TX Ethernet physical-layer transceiver |
| Data Rate Support | 10 Mb/s and 100 Mb/s |
| Supply Voltage Range | 3.135 V to 3.465 V |
| Nominal Supply Voltage | 3.3 V |
| Transceiver Count | 1 |
| Network Standard | 10Base-T/100Base-TX |
| Cable Medium | Unshielded twisted-pair cable |
| EMI Filtering Technology | Quiet-WIRE internal filtering |
| 封装 | 32-QFN with exposed pad, 5 mm x 5 mm |
| 安装类型 | Surface mount |
| Packaging | Tray |
| Maximum Data Rate | 100 Mb/s |
| Minimum Data Rate | 10 Mb/s |
KSZ8061MNXI-TR 32-qfn with exposed pad, 5 mm x 5 mm 引脚配置指南
KSZ8061MNXI-TR(32-qfn with exposed pad, 5 mm x 5 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: KSZ8061MNXI-TR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
KSZ8061MNXI-TR 适用于 6 应用s: Embedded Control Systems, Industrial Control Terminals, Network Printers and Scanners, IP Telephony and VoIP Terminals, IoT Gateways and Edge Devices, Set-Top and Media Access Devices.
Embedded Control Systems
The KSZ8061MNXI-TR is suitable for embedded controllers that need a compact 10/100 Mb/s copper-Ethernet port. Its 3.135 V to 3.465 V operating range supports 3.3 V-class system designs, while the 32-QFN package limits board area compared with larger PHY packages. The host processor must provide the compatible digital interface and Ethernet MAC functionality. Designers should place the PHY and magnetics close to the RJ45 connector, maintain controlled differential impedance, and follow the manufacturer layout guidance for the exposed pad, clock, and analog network nodes.
推荐
Industrial Control Terminals
KSZ8061MNXI-TR can provide the copper-network physical layer for industrial control terminals, sensor gateways, and remote I/O equipment operating at 10 or 100 Mb/s. Its integrated Quiet-WIRE filtering helps reduce line-side EMI, which is valuable where the enclosure, cable, and connector create a difficult emissions environment. The design still requires Ethernet magnetics, appropriate surge and fault protection, and a qualified grounding strategy. Verify the exact temperature range and product-specific EMC requirements before using the PHY in industrial temperature extremes.
推荐
Network Printers and Scanners
Printers, scanners, and multifunction peripherals commonly use a 10/100 Ethernet interface to support legacy infrastructure alongside faster networks. The KSZ8061MNXI-TR provides both 10 Mb/s and 100 Mb/s PHY operation in a compact 32-QFN package, leaving board area for the embedded controller and connector. Quiet-WIRE internal filtering supports cleaner line-side signaling. Layout must prioritize short differential paths, a solid ground reference, controlled magnetics placement, and isolation between external network conductors and sensitive logic.
推荐
IP Telephony and VoIP Terminals
IP telephones and VoIP endpoints can use the KSZ8061MNXI-TR for a shared 10/100 network connection. The PHY's two supported data rates allow the endpoint to operate on both legacy 10 Mb/s and common 100 Mb/s links. Its 32-QFN footprint supports compact equipment designs, while internal Quiet-WIRE filtering can reduce line-side emissions. Engineers should isolate the network connector correctly, use manufacturer-recommended magnetics, and verify acoustic, thermal, and regulatory performance at the complete-product level.
推荐
IoT Gateways and Edge Devices
The KSZ8061MNXI-TR is appropriate for IoT gateways, edge controllers, and connected equipment that require a wired 10/100 Ethernet fallback or primary link. Its 10 Mb/s and 100 Mb/s support covers common LAN environments, and the small QFN package suits space-constrained boards. The digital side must be electrically compatible with the selected controller, while the line side needs correct magnetics and connector implementation. Use a low-impedance ground plane and place the PHY near the network entry point to minimize return-path discontinuities and susceptibility to external EMI.
推荐
Set-Top and Media Access Devices
KSZ8061MNXI-TR can serve set-top boxes, media-access products, and household controllers that retain 10/100 Ethernet connectivity. Its low-footprint 32-QFN package leaves board area for processor, memory, and user-interface circuitry, while Quiet-WIRE filtering helps control radiated emissions from the network port. A practical implementation places magnetics between the PHY and RJ45 connector, keeps high-speed digital routing away from analog pairs, and follows the exposed-pad land pattern for heat spreading. Final emissions and immunity results must be established on the finished assembly.
推荐
工程参考数据: KSZ8061MNXI-TR ——对比、设计指导和合规信息。
选型指南
KSZ8061MNXI-TR-TR and KSZ8061RNDW appear in the same device family and associated 32-QFN ordering context, but their order codes should be checked for packing and configuration requirements. They are not independent functional upgrades. No cross-brand pin-to-pin substitute was independently established, so a second source should not be assumed from family or package similarity alone. Before release, confirm the temperature range, exposed-pad treatment, host-interface details, lifecycle status, magnetics selection, and EMC performance against the manufacturer datasheet and your finished-product requirements.
与替代料对比
| 参数 | 本产品 |
|---|---|
| Product Type | 10Base-T/100Base-TX Ethernet PHY transceiver |
| Data Rates | 10 Mb/s and 100 Mb/s |
| Supply Voltage | 3.135 V to 3.465 V |
| Package | 32-QFN with exposed pad, 5 mm x 5 mm |
| Brand | Microchip Technology |
| EMI Filtering | Quiet-WIRE internal filtering |
| Transceiver Count | 1 |
| Cable Medium | Unshielded twisted-pair cable |
| Mounting Type | Surface mount |
| Ordering Format | KSZ8061MNXI-TR tray configuration |
关键差异点
- Compact copper-Ethernet PHY integration (对比 KSZ8061MNXI-TR-TR)
- Integrated line-side filtering (对比 KSZ8061RNDW)
- Complete 10/100 dual-rate support (对比 KSZ8061MNXI-TR-TR)
设计说明
Place the KSZ8061MNXI-TR, Ethernet magnetics, and RJ45 connector as a compact signal-chain group. Keep the transmit and receive differential pairs over continuous ground planes, avoid stubs and unnecessary vias, and match their geometry to the manufacturer's reference layout. Position protection components at the cable-facing side where their surge-current path can return through the appropriate ground and chassis structures without disturbing the sensitive PHY nodes.
Follow the manufacturer exposed-pad and ground-connection requirements exactly. Provide a low-impedance ground plane beneath the 32-QFN, use the prescribed land pattern, and connect the exposed pad to ground with adequate thermal-via coverage. Route clocks and analog network connections away from switching regulators and high-current LED or relay paths, and keep the quiet analog supply filtering close to the relevant device pins.
Quiet-WIRE filtering reduces line-side EMI, but it does not replace a complete EMC strategy. Select the magnetics and connector according to the manufacturer reference design, preserve common-mode impedance, and control enclosure and cable behavior. Validate radiated emissions, conducted emissions, and immunity with the production PCB, enclosure, power supply, and representative cable because those conditions determine the finished-product result.
合规信息
No specific component-level compliance declaration was established for this ordering code.