KSZ8895RQXI-TR - 5-Port 10/100 Managed Ethernet Switch | Microchip (Tape & Reel)
料号: KSZ8895RQXI-TR ✓ 量产中KSZ8895RQXI-TR 概述
An Ethernet switch is a network-semiconductor device that connects multiple physical Ethernet endpoints through one integrated switching fabric. Within the broader hierarchy, the KSZ8895RQXI-TR is an Ethernet interface IC, a Layer 2 switch, and a power-management-conscious embedded networking component. Instead of requiring five individual PHY channels and a separate switch controller, the device consolidates these functions into a single package while presenting the host processor with an MII or RMII connection.
The principal features are five integrated 10/100 Ethernet ports, Layer 2 managed-switch operation, MII and RMII host interfaces, automotive qualification, and a 128-PQFP industrial package. The MII interface supports a parallel processor-facing data path, while RMII reduces the number of host signals and board routing requirements. These two options allow the same switch family to address processors with different Ethernet-MAC interfaces.
Because the KSZ8895RQXI-TR integrates several networking functions, PCB designers can reduce external component count and simplify the relationship between the processor, copper Ethernet ports, magnetics, and management circuitry. Its Layer 2 architecture is appropriate for local traffic classification, port monitoring, VLAN-oriented control, and other managed-switch functions implemented through its register interface. The manufacturer product page describes the device as a five-port Layer 2 managed switch designed to reduce system cost.
Typical implementations include industrial Ethernet control equipment, automotive embedded networking, factory automation, building infrastructure, and compact communication appliances. In each case, the five integrated ports can connect local sensors, service interfaces, service modules, or other Ethernet nodes while the host processor supervises configuration through MII or RMII. Automotive-qualified versions are particularly relevant where network equipment must operate in a harsh electrical environment.
Layout should preserve the high-speed differential characteristics of every 10/100 copper port and keep the RMII or MII interface away from switching-node energy. The 128-pin PQFP package requires careful escape routing, and its 14 x 20 mm body is substantially larger than modern QFN alternatives. Designers should therefore evaluate board area, assembly tooling, thermal performance, and connector placement before committing the footprint.
This product page combines the Microchip five-port managed-switch positioning, package and interface details, drop-in family alternatives, application guidance, and comparison information. It is intended to help engineers evaluate the KSZ8895RQXI-TR against same-package variants without confusing temperature-grade, packing, and interface options with functional differences.
直接替换替代料: KSZ8895RQXI-TR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: KSZ8895RQXI-TR (相同外形与封装尺寸) ——差异在于 Host Interface, Package, Product Type, Automotive Qualification, Number of Ports.
KSZ8895MQXIA
✅ 直接替换联系询价
查看数据手册 →KSZ8895RQXIA
✅ 直接替换📋 参考替代料(不在目录中)
KSZ8895FQXIA
✅ 直接替换📋 参考替代料(不在目录中)
KSZ8895RQI
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →KSZ8895MLX
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
KSZ8895RQXI-TR 最大额定值与电气特性
| Product Type | Layer 2 managed Ethernet switch |
| Number of Ethernet Ports | 5 ports |
| Ethernet Speed | 10/100 Base-T/TX |
| Network Layer | Layer 2 |
| Host Interface | MII and RMII |
| 封装 | 128-PQFP (14 x 20 mm) |
| 安装类型 | Surface mount |
| Automotive Qualification | Automotive qualified |
| Integrated PHY Count | 5 integrated 10/100 PHYs |
| Switch Configuration | Managed five-port switch |
| 引脚数 | 128 pins |
| Package Body Length | 20 mm |
| Package Body Width | 14 mm |
| RoHS 状态 | Compliant |
KSZ8895RQXI-TR 14 mm 引脚配置指南
KSZ8895RQXI-TR(14 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: KSZ8895RQXI-TR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
KSZ8895RQXI-TR 适用于 6 应用s: Automotive Ethernet Gateway, Industrial Automation Controller, Building Infrastructure Equipment, Compact Communication Appliance, Factory Communication Hub, Network Management Terminal.
Automotive Ethernet Gateway
The KSZ8895RQXI-TR fits an automotive Ethernet gateway that must consolidate several 10/100 Base-T/TX links into a processor-controlled Layer 2 network. Five integrated ports reduce the number of separate Ethernet PHYs and switch controllers needed around the host processor. The MII or RMII interface allows the design to connect to a compatible Ethernet MAC, while the automotive-qualified family status supports harsh-environment development. The main engineering consideration is package area: the 128-pin PQFP occupies 14 x 20 mm, so connector placement and copper-clearance requirements must be planned around the larger footprint.
推荐
Industrial Automation Controller
The KSZ8895RQXI-TR is suited to industrial automation equipment that connects sensors, drives, remote I/O, and service equipment over five local 10/100 Ethernet ports. Its Layer 2 managed-switch architecture provides a single network interface toward the supervisory processor rather than requiring a separate switch controller. An RMII connection can reduce host-side routing compared with MII, although the processor MAC must support the selected mode. PCB planning should keep copper-pair routing controlled and provide appropriate isolation where the controller connects to external industrial cabling.
推荐
Building Infrastructure Equipment
The KSZ8895RQXI-TR can serve as the managed Ethernet switch in building infrastructure controllers, access units, and supervisory panels requiring five wired endpoints. It consolidates five 10/100 Base-T/TX ports and Layer 2 management into one IC while offering MII or RMII connectivity to the embedded controller. This arrangement supports local traffic handling without a full system architecting a discrete switching subsystem. Because this is a wired copper-port device, designers should implement the manufacturer reference network and magnetics interface, validate clocking, and account for port-isolation requirements appropriate to the installation.
推荐
Compact Communication Appliance
The KSZ8895RQXI-TR fits compact communication appliances that expose multiple wired Ethernet services through one host processor. Five integrated 10/100 ports support management, service, and endpoint connections while the host selects MII for a broader parallel interface or RMII for a more compact processor connection. The Layer 2 managed-switch architecture can reduce external PHY count and simplify board partitioning. Designers should evaluate the large 128-PQFP land pattern against smaller Ethernet switch packages, but retain the KSZ8895RQXI-TR when its five-port integration, qualification, and interface options outweigh the footprint penalty.
推荐
Factory Communication Hub
The KSZ8895RQXI-TR can act as a factory communication hub linking five 10/100 equipment nodes to a central embedded controller. The managed Layer 2 architecture allows local Ethernet traffic to be handled by the switch while management status remains available to the host processor. Its five integrated PHYs can simplify enclosure design by avoiding five separate Ethernet interface packages and their supporting circuits. The design must include correct termination, magnetics or coupling options, controlled clock distribution, and a layout that protects differential signals from switching-node and digital return currents.
推荐
Network Management Terminal
The KSZ8895RQXI-TR is appropriate for a network management terminal that must provide several 10/100 service ports while using a processor with MII or RMII connectivity. Five integrated ports allow the terminal to connect management, diagnostic, and endpoint networks while preserving Layer 2 switching functions. MII may suit a processor with a dedicated parallel MAC, whereas RMII simplifies host routing and can assist board-area reduction. Firmware must configure the switch registers correctly, and the hardware design should follow the manufacturer's reference layout for clock, power, decoupling, and copper-port connections.
推荐
推荐产品汇总
工程参考数据: KSZ8895RQXI-TR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | KSZ8895MQXIA | KSZ8895RQXI-TRA | KSZ8895FQXIA | KSZ8895RQI | KSZ8895MLX |
|---|---|---|---|---|---|---|
| Package | 128-PQFP (14 x 20 mm) | 128-PQFP (14 x 20 mm) | 128-PQFP (14 x 20 mm) | 128-PQFP (14 x 20 mm) | 128-PQFP (14 x 20 mm) | 128-PQFP (14 x 20 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Ethernet Port Count | 5 ports | 5 ports | 5 ports | 5 ports | 5 ports | 5 ports |
| Ethernet Speed | 10/100 Base-T/TX | 10/100 Base-T/TX | 10/100 Base-T/TX | 10/100 Base-T/TX | 10/100 Base-T/TX | 10/100 Base-T/TX |
| Switch Architecture | Layer 2 managed switch | Layer 2 managed switch | Layer 2 managed switch | Layer 2 managed switch | Layer 2 managed switch | Layer 2 managed switch |
| Host Interface | MII and RMII | MII and RMII | MII and RMII | MII and RMII | MII and RMII | MII and RMII |
关键差异点
- Five integrated managed copper ports in one device (对比 KSZ8895RQI)
- Documented core-performance equivalence (对比 KSZ8895MQXIA)
- Supports both processor-facing Ethernet interface styles (对比 KSZ8895FQXIA)
- Automotive-qualified family positioning (对比 KSZ8895MQXIA)
设计说明
Route every 10/100 copper pair as a controlled-impedance differential pair and keep it away from switching nodes, clock edges, and high-current return paths. Place the device-side network components and magnetics or coupling components in the positions shown by the manufacturer's reference layout. Because the KSZ8895RQXI-TR uses a 128-pin PQFP rather than a compact QFN, plan connector placement around the 14 x 20 mm body and avoid adding unnecessary layer transitions.
Use the manufacturer's clock, decoupling, and host-interface layout as the baseline for a stable RMII or MII connection. Keep the reference clock distribution path short, return the clock through a continuous ground reference, and avoid routing it alongside Ethernet differential pairs. Validate MII timing margins with the processor MAC because the parallel interface has more pins and a different timing profile from RMII. Confirm configuration-strapping and management-signal levels against the datasheet before finalizing the host schematic.
Partition the 128-pin PQFP so that power and ground connections have short return paths and ample via access. Follow the manufacturer's recommended bypass network and place high-frequency decoupling close to the relevant supply pins rather than at the board edge. For a multiport network device, verify the complete power budget across five active 10/100 ports and account for thermal rise in the PQFP assembly. Do not infer allowable dissipation from ambient temperature alone.
Do not substitute a KSZ8895 suffix solely because the product descriptions appear similar. M, Q, R, F, I, and X characters can encode grade, temperature, qualification, or packing attributes. Compare the complete ordering information for the KSZ8895RQXI-TR and proposed device, including package dimensions, pin assignments, qualification status, and supply voltage. A footprint match alone does not establish that the regulatory, temperature, or production requirements are equivalent.
合规信息
Microchip identifies the KSZ8895 family as automotive qualified. RoHS compliance is identified for the KSZ8895RQXI-TR. Specific AEC-Q100 classification, REACH status, lead-free status, halogen-free status, and conflict-minerals status require confirmation from the exact ordering code and manufacturer documentation.