L6451013TR - 28-Channel Inkjet Driver, 5.25 V | STMicroelectronics
料号： L6451013TR ✓ 量产中L6451013TR 概述
An inkjet driver is a specialized interface IC that converts low-voltage logic commands into controlled high-voltage and high-current drive signals for piezoelectric inkjet nozzles. In the system hierarchy, this device is a printer-specific peripheral driver within the broader interface IC and power-driver categories. Its 28 output channels allow one controller to manage multiple print-head elements while reducing the number of discrete drivers required at the board level.
The L6451013TR is listed as a 28-channel driver with a nominal peak output current limit of 2 A and a maximum supply voltage rating of 5.25 V. The 44-terminal PLCC package provides the mechanical footprint used in the original inkjet-printer controller boards. The commercial temperature range supports operation in controlled indoor printer and imaging environments, but the 0°C to 70°C limit is a key constraint for designs operating across wider industrial temperature ranges.
Typical applications include inkjet print-head carriage electronics, multi-nozzle print-head assemblies, printer engine control boards, and specialized inkjet dispensing systems. Because it is a dedicated 28-channel print-head driver rather than a general-purpose logic buffer, its timing inputs, protection features, and pin functions are intended for a particular inkjet drive architecture.
The principal design consideration is the relationship between the 2 A nominal peak output current rating, the inductive or capacitive load presented by the print head, and the protection network connected to each channel. PCB routing must minimize loop area in high-current drive paths, and unused or reserved outputs should be handled according to the manufacturer pin-description table. Production quantities should be confirmed before layout release because this is an older specialized printer-driver family with limited channel-count substitution.
This page consolidates package, channel-count, supply, temperature, and output-current information into a structured engineering reference. It also distinguishes the documented L6451013TR ratings from specifications that must be taken directly from the manufacturer datasheet, including precise channel timing, dropout behavior, and protection thresholds.
直接替换替代料： L6451013TR ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
L6451012TR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
L6451011TR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
L6451013TR 规格参数
| Product Type | Inkjet print-head driver IC |
| Manufacturer | STMicroelectronics |
| Number of Output Channels | 28 channels |
| Nominal Output Current | 2 A peak |
| Maximum Supply Voltage | 5.25 V |
| Supply Voltage Range | 4.75 V to 5.25 V |
| 工作温度范围 | 0°C to 70°C |
| Temperature Grade | Commercial |
| Package Type | PLCC |
| Number of Terminals | 44 terminals |
| 安装类型 | Surface mount |
| Logic Family | Printer peripheral driver |
| 输出配置 | 28-channel print-head drive outputs |
L6451013TR plcc 引脚配置指南
L6451013TR（plcc 封装）的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据： L6451013TR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
L6451013TR 适用于 6 应用s: Inkjet Print-Head Driver Electronics, Piezoelectric Nozzle Drive Circuits, Multi-Nozzle Printer Controller Boards, Industrial Inkjet Dispensing Systems, Printer Engine Peripheral Control, Legacy Print-Engine Electronics Refresh.
Inkjet Print-Head Driver Electronics
The L6451013TR is designed for the drive stage of an inkjet print head because its 28 outputs can control multiple piezoelectric nozzle elements from a single 44-lead PLCC device. The documented 2 A nominal peak output current supports high-current switching demanded by print-head loads, while the 4.75 V to 5.25 V supply range matches low-voltage printer control electronics. Place the driver near the print-head connector, use short output paths, and verify channel timing and voltage limits against the manufacturer datasheet before layout release.
推荐
Piezoelectric Nozzle Drive Circuits
A 28-channel inkjet driver is especially relevant to piezoelectric print heads, where each nozzle element requires controlled high-voltage pulses and precise timing. The L6451013TR's 2 A nominal peak output rating provides the drive-current class commonly needed by such loads without implying continuous 2 A per channel. Its 0°C to 70°C commercial range suits enclosed printer mechanisms, and the 44-lead PLCC package simplifies assembly on legacy print-engine controller boards.
推荐
Multi-Nozzle Printer Controller Boards
The L6451013TR can reduce the number of discrete drive components required on a multi-nozzle printer controller by providing 28 dedicated channels in one package. This consolidation supports cleaner control-board layouts while retaining the specialized drive behavior expected by inkjet heads. Designers should verify whether each nozzle requires complementary drive, determine the maximum simultaneous switching count, and keep high-current loops compact around the driver and print-head connector.
推荐
Industrial Inkjet Dispensing Systems
Specialized inkjet dispensers that deposit precise droplets onto a controlled surface can use the 28-channel architecture of the L6451013TR, provided the print head is electrically compatible with its drive timing and output ratings. The 4.75 V to 5.25 V supply range integrates well with printer logic, while the 2 A peak current specification supports the switching class of suitable nozzle loads. Confirm ambient conditions because the commercial 0°C to 70°C rating excludes colder factory environments.
推荐
Printer Engine Peripheral Control
In an inkjet printer, the head driver works alongside motor, sensor, and engine-control circuitry, making the L6451013TR a natural choice for the dedicated print-head interface section of the controller. A 44-lead PLCC accommodates the channel outputs and associated control, supply, and ground connections in a compact surface-mount package. Keep logic-control routing away from the high-current outputs, provide local supply decoupling, and use the manufacturer pin table to identify every reserved terminal.
推荐
Legacy Print-Engine Electronics Refresh
The L6451013TR can support a targeted refresh of an existing inkjet printer controller when its 44-lead PLCC footprint, 28-channel arrangement, and electrical drive requirements match the original design. The part is especially relevant to equipment that operates within 0°C to 70°C and uses a 4.75 V to 5.25 V control supply. Before substituting it into stored legacy hardware, compare pin functions, timing, output current, and protection characteristics against the exact board schematic.
推荐
推荐产品汇总
工程参考数据： L6451013TR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | L6451012TR | L6451011TR |
|---|---|---|---|
| Manufacturer | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 44-lead PLCC | 44-lead PLCC | 44-lead PLCC |
| Function | 28-channel inkjet print-head driver | L6451 inkjet-driver family | L6451 inkjet-driver family |
| Mounting Type | Surface-mount PLCC | Surface-mount PLCC | Surface-mount PLCC |
| Primary Application | Inkjet print-head drive | Inkjet print-head drive | Inkjet print-head drive |
关键差异点
- Dedicated 28-channel inkjet drive architecture （对比 L6451012TR)
- Defined low-voltage supply operating window （对比 L6451011TR)
- Published peak output current for load planning （对比 L6451012TR)
设计说明
Route the 28 high-current drive outputs as short, wide paths between the L6451013TR and the print-head connector. High-current switching loops should be kept away from logic and timing nets. Use a continuous ground reference beneath and around the device, and avoid routing sensitive control traces beneath the output paths. The 2 A peak rating describes output capability, not a continuous-current design target.
The documented supply range is 4.75 V to 5.25 V, so the controller must regulate the driver rail within that window rather than allowing rail droop during print-head switching. Place supply decoupling directly at the device's supply and ground pins and verify the regulator's transient response with the real print-head cable and load. Do not infer print-head output-voltage limits from the 5.25 V control-supply rating.
Do not select an alternative using package similarity alone. A valid replacement must match the 28 output channels, logic polarity, drive timing, output-stage voltage capability, and 2 A peak-current class. Because the commercial rating is limited to 0°C to 70°C, also confirm the enclosure temperature. Obtain manufacturer pin and timing tables before releasing a substitution into a production layout.
合规信息
The technical listings identify a commercial-temperature inkjet driver but do not establish RoHS, REACH, halogen-free, conflict-minerals, or automotive qualification status. The device is not an automotive-qualified product in the documented description.
