LAN9500-ABZJ - USB 2.0 to 10/100 Ethernet | Microchip
料号: LAN9500-ABZJ ✓ 量产中LAN9500-ABZJ 概述
A USB-to-Ethernet controller is an interface IC that translates USB transactions into Ethernet frames. The LAN9500 family integrates the USB 2.0 controller, 10/100 Ethernet PHY, required clocking and control functions, and a network interface for external magnetics and a 10/100 Ethernet transformer. This integration places it within the broader hierarchy of interface ICs, Ethernet controllers, USB interface controllers, and semiconductor connectivity devices.
The principal features include Hi-Speed USB 2.0 operation, 10/100 Ethernet connectivity, an integrated Ethernet PHY, and a compact 56-QFN package. The integrated PHY reduces the component count and board area needed for a basic USB Ethernet adapter, while full-speed or high-speed USB operation supports legacy and current USB host environments. Its 3.3 V operating range allows use with conventional 3.3 V system rails.
Microchip positions the LAN9500 and LAN9500A families as cost-competitive USB-to-Ethernet connectivity solutions. Although the devices share the same package and are pin compatible, their reference circuitry is not always identical: the required EXRES resistor value and associated system components differ between members of the family. A PCB designed for one variant must therefore be checked against the complete reference schematic before substitution.
Typical uses include USB docking stations, personal-computer and embedded-computer network adapters, digital television equipment, set-top boxes, network printers, industrial control equipment, and portable test instruments. The controller is especially useful when a compact product needs an Ethernet port but its main processor provides only USB connectivity.
Designers should follow the manufacturer reference schematic for power, crystals, EXRES components, magnetics, and Ethernet termination. High-speed USB traces require controlled impedance and a short, uninterrupted route between the host connector and controller, while the Ethernet magnetics and passives should follow the reference layout to preserve signal and thermal performance.
This page combines the official device information, package characteristics, pin-compatible family options, application guidance, and practical design checks needed to evaluate the LAN9500-ABZJ for a USB-to-Ethernet design.
直接替换替代料: LAN9500-ABZJ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LAN9500-ABZJ (相同外形与封装尺寸) ——差异在于 Package, RoHS Status.
LAN9500A-ABZJ
✅ 直接替换联系询价
查看数据手册 →LAN9500I-ABZJ
✅ 直接替换📋 参考替代料(不在目录中)
LAN9500AI-ABZJ
✅ 直接替换📋 参考替代料(不在目录中)
LAN9730-ABZJ-TR
✅ 直接替换联系询价
查看数据手册 →LAN9730I-ABZJ
✅ 直接替换📋 参考替代料(不在目录中)
LAN9500-ABZJ 规格参数
| Product Type | Hi-Speed USB 2.0 to 10/100 Ethernet controller |
| USB Interface | USB 2.0 Hi-Speed |
| Ethernet Data Rate | 10/100 Mb/s |
| Integrated Ethernet PHY | 10/100 Base-T/TX PHY |
| Supply Voltage Range | 3 V to 3.6 V |
| Typical Supply Current | 78 mA |
| 工作温度范围 | 0°C to +70°C |
| 封装 | 56-pin QFN |
| Package Dimensions | 8 x 8 mm |
| 安装类型 | Surface mount |
| Ethernet Interface | 10/100 Base-T/TX |
| Lead-Free Status | Lead-free package |
| RoHS 状态 | RoHS compliant |
| Temperature Grade | Commercial |
| 引脚数 | 56 pins |
| Controller Class | Ethernet interface controller |
| Host Connectivity | USB 2.0 |
LAN9500-ABZJ 8 x 8 mm 引脚配置指南
LAN9500-ABZJ(8 x 8 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: LAN9500-ABZJ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LAN9500-ABZJ 适用于 6 应用s: USB Ethernet Network Adapter, Industrial USB-to-Ethernet Gateway, Set-Top Box and Digital TV Connectivity, Embedded Computer Network Port, Network Printer Interface, Portable Test and Measurement Equipment.
USB Ethernet Network Adapter
LAN9500-ABZJ fits a compact USB-to-Ethernet adapter because it combines a Hi-Speed USB 2.0 controller with an integrated 10/100 Base-T/TX PHY. The 56-QFN 8 x 8 mm package leaves more board area for magnetics, filtering, and connectors than a discrete USB controller and Ethernet PHY design. Its 3 V to 3.6 V operating range supports a conventional 3.3 V implementation, while the integrated PHY avoids an external 10/100 Ethernet transceiver. The finished adapter still needs manufacturer-recommended clock, EXRES, decoupling, magnetics, and termination components, so the reference schematic is the appropriate starting point for a production layout.
推荐
Industrial USB-to-Ethernet Gateway
For an industrial gateway, LAN9500-ABZJ provides a direct bridge between a USB host and a 10/100 Mb/s Ethernet network. The integrated Ethernet PHY simplifies the hardware portion of the interface while the compact 56-pin QFN package supports dense controller layouts. Its commercial 0°C to +70°C rating is suitable for controlled indoor equipment, although machinery environments may require an industrial-temperature alternative. Design the enclosure, power supply, Ethernet isolation, surge protection, and thermal conditions as a complete system. If the gateway must operate across a wider temperature range, review LAN9500I-ABZJ because its specified range extends from -40°C to +85°C.
推荐
Set-Top Box and Digital TV Connectivity
LAN9500-ABZJ is appropriate for set-top boxes and digital television products that need network access through an existing USB interface. The Hi-Speed USB 2.0 controller and integrated 10/100 Base-T/TX PHY provide the required bridge functions without an external Ethernet PHY. The 8 x 8 mm QFN package is useful where connector placement and board area are constrained, and the 3.3 V supply range aligns with many embedded platforms. A completed design should maintain controlled USB impedance, isolate the analog network side with suitable magnetics, and follow the manufacturer layout for the crystal, EXRES network, and bypass capacitors.
推荐
Embedded Computer Network Port
Embedded computers and industrial controllers often have USB connectivity but no native Ethernet MAC or PHY. LAN9500-ABZJ supplies that missing network path by integrating a Hi-Speed USB 2.0 controller, a 10/100 Ethernet PHY, and the associated interface functions in one device. The result is a practical way to add wired networking without allocating board area for separate controller and transceiver packages. Firmware must support the controller through an appropriate USB Ethernet driver, while the hardware must provide a clean 3.3 V supply and the manufacturer-specified crystal and external networks. The commercial temperature range makes the part appropriate for typical indoor embedded systems.
推荐
Network Printer Interface
LAN9500-ABZJ can provide a wired 10/100 Mb/s interface for printers and print servers whose main processing path is USB. Integrating the Ethernet PHY inside the controller reduces the number of high-speed network components on the board, while the 56-QFN package supports compact consumer and office equipment. The implementation must still account for isolation and surge requirements at the cable connection, magnetics layout, firmware driver support, and operating-system network discovery. The 3 V to 3.6 V supply range allows use with a 3.3 V system rail, subject to the exact reference circuit and component tolerances specified by Microchip.
推荐
Portable Test and Measurement Equipment
LAN9500-ABZJ is useful in portable test equipment that records or transfers data over Ethernet but communicates internally through USB. The integrated 10/100 Ethernet PHY allows the product to expose a wired network connection while keeping the controller footprint compact. Typical implementations connect the USB host port through controlled-impedance traces and route the Ethernet side through a qualified 10/100 transformer, with separate filtering and protection according to the product's cable interface. For battery-powered instruments, include the approximately 78 mA typical controller consumption in the power budget and assess the complete 3 V to 3.6 V operating range. Use an industrial-temperature option when the instrument operates outside 0°C to +70°C.
推荐
推荐产品汇总
工程参考数据: LAN9500-ABZJ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LAN9500A-ABZJ | LAN9500I-ABZJ | LAN9500AI-ABZJ | LAN9730-ABZJ-TR | LAN9730I-ABZJ |
|---|---|---|---|---|---|---|
| Package | 56-QFN (8 x 8 mm) | 56-QFN (8 x 8 mm) | 56-QFN (8 x 8 mm) | 56-QFN (8 x 8 mm) | 56-QFN (8 x 8 mm) | 56-QFN (8 x 8 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| USB Interface | Hi-Speed USB 2.0 | Hi-Speed USB 2.0 | Hi-Speed USB 2.0 | Hi-Speed USB 2.0 | USB 2.0 | USB 2.0 |
| Ethernet Data Rate | 10/100 Mb/s | 10/100 Mb/s | 10/100 Mb/s | 10/100 Mb/s | 10/100 Mb/s | 10/100 Mb/s |
| Integrated Ethernet PHY | 10/100 Base-T/TX PHY | 10/100 Base-T/TX PHY | 10/100 Base-T/TX PHY | 10/100 Base-T/TX PHY | 10/100 Ethernet PHY | 10/100 Ethernet PHY |
| Supply Voltage | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | Single 3.3 V supply | Single 3.3 V supply |
| EXRES and External Components | LAN9500 family configuration | Different EXRES resistor value and system components | LAN9500 family configuration with industrial temperature grade | A-family configuration with different EXRES and system components | Single-supply controller architecture | Single-supply controller architecture |
关键差异点
- Integrated USB and Ethernet connectivity in one compact controller (对比 LAN9730-ABZJ-TR)
- Commercial-temperature configuration with a 0°C to +70°C range (对比 LAN9500I-ABZJ)
- Same footprint as the A-family controller with different external requirements (对比 LAN9500A-ABZJ)
设计说明
Build the layout from the manufacturer LAN950x reference schematic rather than from a generic USB-to-Ethernet example. Place the EXRES network, crystal, required bypass capacitors, and controller-side Ethernet components close to their associated pins. Preserve the 56-QFN pad geometry and thermal-via pattern specified for the 8 x 8 mm package. Because LAN9500 and LAN9500A use different EXRES values and external components, verify every affected BOM item before releasing a replacement PCB.
Treat the USB host connection as a controlled-impedance high-speed interface. Use a short route from the USB connector to the controller, maintain the reference impedance of the complete trace path, and avoid stubs or test pads that create discontinuities. Keep the Ethernet magnetics and termination network away from noisy switching nodes. Separate the Ethernet and digital ground-current paths where the reference layout permits, and do not route high-current regulator or relay traces beneath the sensitive controller area.
Provide a stable 3.3 V rail within the controller's specified 3 V to 3.6 V range. Follow the manufacturer requirements for local bypass capacitance, clock components, and power routing, and include the controller's approximately 78 mA typical consumption in the supply budget. Verify startup, brownout behavior, and load transients at the USB connector because the host may control whether the device receives power.
Do not substitute LAN9500, LAN9500A, LAN9500i, or LAN9500Ai solely by matching the 56-QFN outline. The family shares a footprint but may differ in temperature grade, EXRES value, supply arrangement, and other external components. For an assembled board, compare the manufacturer ordering information and complete reference schematic, then confirm driver support for the selected controller family. Reel and tray suffixes also change handling and order quantities without changing the core device.
合规信息
The manufacturer ordering information identifies LAN9500-ABZJ as a lead-free, RoHS-compliant 56-pin QFN device. No separate REACH, halogen-free, or conflict-minerals declaration was identified for this ordering code.