LM358M/NOPB - Dual 32 V, 1 MHz Op Amp | Texas Instruments
料号: LM358M/NOPB ✓ 量产中LM358M/NOPB 概述
An operational amplifier is an analog signal-processing IC that compares an input voltage with a feedback reference and amplifies the difference between them. The LM358 belongs to the operational-amplifier hierarchy, where it serves as a general-purpose voltage-feedback amplifier rather than a dedicated comparator, analog-to-digital converter, or precision reference. Two amplifiers in one package provide independent signal paths while reducing board area and simplifying dual-channel designs.
Key features include two amplifier channels, a 32 V maximum supply rating, internally frequency compensation, and operation from a single positive supply or split supplies. Each channel can be used as an inverting amplifier, non-inverting amplifier, voltage follower, buffer, comparator, or general signal-conditioning stage. The low-power design is particularly useful in industrial controls, sensor interfaces, power-conversion feedback loops, and test equipment where a wide supply range is more valuable than very high bandwidth.
The internal frequency compensation allows stable operation without external compensation components in conventional closed-loop configurations. This simplifies design-in because the amplifier does not require an added compensation capacitor for ordinary gain settings. Because this is an SOIC-8 device, both channels share pins for the positive supply and ground, while each channel has independent input and output terminals. Layout should still keep sensitive input nodes away from supply-return paths and high-current switching nodes.
Typical uses include sensing and buffering sensor outputs, closing loops around power supplies, amplifying low-frequency control signals, and implementing threshold or comparator-style functions. In split-supply systems, the LM358 can operate from positive and negative rails, but its input common-mode and output ranges have restrictions that must be checked against the actual signal levels. The 1 MHz characterization makes it suitable for general-purpose low-bandwidth analog tasks rather than high-speed precision signal chains.
Designers should verify common-mode range, output swing, load capability, input bias current, and stability for the selected feedback network. Connecting unused amplifier inputs to a defined voltage prevents input-stage behavior from becoming unpredictable. Decoupling capacitors should be placed close to the supply pins, and differential routing should be minimized to reduce noise pickup.
This page combines manufacturer specifications, practical circuit guidance, package information, and a structured comparison of pin-compatible alternatives. It also identifies application-specific trade-offs involving supply range, temperature grade, package, and amplifier performance so that engineers can select the correct dual operational amplifier without relying on a generic LM358 description.
直接替换替代料: LM358M/NOPB ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LM358M/NOPB (相同外形与封装尺寸) ——差异在于 Package, Slew Rate, Supply Voltage (Single), Gain-Bandwidth Product, Operating Temperature Range.
RC4558DR
✅ 直接替换📋 参考替代料(不在目录中)
LM2904DR
✅ 直接替换联系询价
查看数据手册 →LM2904D
✅ 直接替换联系询价
查看数据手册 →LM358DT
✅ 直接替换✓ 有现货
$0.0509 / 个
查看数据手册 →SGM358
✅ 直接替换📋 参考替代料(不在目录中)
LM358M/NOPB 最大额定值与电气特性
| Amplifier Channel Count | 2 channels |
| Product Type | Dual general-purpose operational amplifier |
| Maximum Supply Voltage | 32 V |
| Supply Configuration | Single or split supply |
| Gain-Bandwidth Product | 1 MHz |
| Compensation | Internally frequency compensated |
| 工作温度范围 | 0°C to 70°C |
| 封装 | 8-SOIC |
| 安装类型 | Surface mount |
| Channel Count | 2 independent amplifiers |
LM358M/NOPB 引脚配置
| 引脚 1 | OUT1 — Amplifier 1 output |
| 引脚 2 | IN1- — Amplifier 1 inverting input |
| 引脚 3 | IN1+ — Amplifier 1 non-inverting input |
| 引脚 4 | GND — Ground reference |
| 引脚 5 | IN2+ — Amplifier 2 non-inverting input |
| 引脚 6 | IN2- — Amplifier 2 inverting input |
| 引脚 7 | OUT2 — Amplifier 2 output |
| 引脚 8 | VCC — Positive supply voltage |
典型应用
LM358M/NOPB 适用于 6 应用s: Industrial Sensor Signal Conditioning, Power-Supply Feedback and Control, Battery-Powered Monitoring Circuit, Audio Preamplifier and Buffering, Test and Measurement Front End, Threshold Detection and Comparator-Style Logic.
Industrial Sensor Signal Conditioning
The LM358M/NOPB fits industrial sensor interfaces that require two independent amplification paths and a supply range reaching 32 V. According to the manufacturer datasheet, each channel is internally frequency compensated, allowing conventional feedback networks to operate without an external compensation capacitor. One channel can amplify a sensor signal while the other provides buffering, gain, or an active filter. Its 1 MHz gain-bandwidth product is appropriate for low-bandwidth process-control signals, but input offset, bias current, common-mode range, and output swing must remain within the circuit limits. The 8-SOIC footprint also keeps the analog section compact while leaving both channels available for differential or single-ended signal conditioning.
推荐
Power-Supply Feedback and Control
The LM358M/NOPB is useful in power-supply feedback loops where the amplifier compares an error voltage with a reference and drives a control or compensation network. Its 32 V maximum supply rating provides headroom for monitoring or control circuits associated with higher-voltage industrial rails. Because the amplifier is internally frequency compensated and characterized to 1 MHz, it is appropriate for slow regulation loops and general error amplifiers rather than high-bandwidth compensation tasks. The two independent channels can implement voltage-mode feedback and current-mode feedback in the same assembly. Designers should verify loop stability, common-mode range, output drive, and stability with the exact external compensation values before committing the circuit to production.
推荐
Battery-Powered Monitoring Circuit
The LM358M/NOPB can monitor a battery or portable-system rail when low power and flexible supply operation are priorities. According to the manufacturer datasheet, the LM358 family is designed for single-supply operation, and its supply-current drain is independent of the supply-voltage magnitude. Two independent channels can provide one measurement path and one control path within a single 8-SOIC package. The device is best suited to slow monitoring, threshold, and alert functions because its 1 MHz gain-bandwidth product is not intended for high-speed signal analysis. Actual battery-life calculations should use the channel-specific quiescent-current values from the datasheet, account for output loading, and confirm that the minimum operating supply remains above the device's specified limit.
推荐
Audio Preamplifier and Buffering
The LM358M/NOPB can serve as a general-purpose preamplifier or buffer in modest audio and communication equipment. Its two independent channels allow one stage to amplify a low-level source and another to buffer an output or support gain control. According to the manufacturer datasheet, the internally compensated architecture supports conventional closed-loop amplifier configurations and accommodates a broad supply range. The 1 MHz gain-bandwidth product is sufficient for many low-frequency audio paths, although noise, input bias current, output swing, and load drive determine the achievable signal quality. Designers should keep input traces short, place input-biasing resistors near the amplifier, and verify that the source impedance does not create excessive offset or gain error.
推荐
Test and Measurement Front End
The LM358M/NOPB is appropriate for the slow-voltage front end of a test instrument, measurement fixture, or laboratory interface. Two channels can handle a reference buffer and an input amplifier, reducing the component count compared with two separate single amplifiers. According to the manufacturer datasheet, the device supports operation up to 32 V and has a 1 MHz gain-bandwidth product, making it appropriate for general measurement and control signals rather than high-speed instrumentation. The amplifier can also operate from split supplies when the measured signal requires bipolar swing. Input protection, grounding, and leakage around high-impedance sources remain important; check input bias current and common-mode limits before adding a large source impedance.
推荐
Threshold Detection and Comparator-Style Logic
The LM358M/NOPB can perform threshold detection when the design requires an analog output that changes with an input condition rather than a saturated logic output. Its two independent amplifier channels permit separate reference and signal paths, while the 32 V supply capability supports industrial control voltages. According to the manufacturer datasheet, the device provides high gain and internal frequency compensation, making it suitable for conventional amplifier-based threshold circuits. Output-state behavior near the reference must be checked because the LM358 output stage does not behave like a rail-to-rail logic gate. Input overvoltage, output saturation, and noise around the switching threshold should be evaluated before using the device as a safety-critical decision element.
推荐
推荐产品汇总
工程参考数据: LM358M/NOPB ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | RC4558DR | LM2904DR | LM2904D | LM358 | SGM358 |
|---|---|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Texas Instruments | Texas Instruments | STMicroelectronics | STMicroelectronics | 3PEAK | SGMC (Sagna Microelectronics) |
| Amplifier Channels | 2 | 2 | 2 | 2 | 2 | 2 |
关键差异点
- Supports a 32 V maximum supply voltage (对比 LM2904DR)
- Two independent internally compensated amplifiers (对比 3PEAK LM358)
- Standard 8-SOIC pin organization supports PCB reuse (对比 SGM358)
- Single or split-supply flexibility (对比 RC4558DR)
设计说明
Route the two non-inverting inputs as short and quiet as possible, particularly when they connect to high-impedance sensors. Keep them away from the VCC pin, switching-regulator inductors, relay contacts, and fast digital return paths. Place the input-bias resistors close to the associated input pins so that parasitic capacitance does not form an unintended filter with a high source impedance. Maintain a continuous ground reference beneath the analog section and use a single low-impedance connection point for analog and power return currents.
Place the supply-decoupling capacitor as close as practical to pin 8, with a short ground return to pin 4. The capacitor location matters more than a large capacitance when switching noise is present because long supply and ground traces create inductance that can convert fast current edges into supply disturbance. Follow the recommended operating conditions and typical application circuit in the manufacturer datasheet. Verify that the maximum supply voltage, common-mode limits, and output swing are respected at every operating point.
Do not assume that an 8-SOIC footprint alone guarantees that every LM358 equivalent has identical DC and dynamic behavior. Before replacing LM358M/NOPB, compare input offset voltage, input bias current, gain-bandwidth product, slew rate, common-mode range, output swing, output-current capability, supply current, and temperature rating. If only one amplifier is used, connect the unused channel's inputs to a defined reference within its input range so that the unused stage does not float and introduce noise or unpredictable behavior.
合规信息
The NOPB ordering suffix identifies the no-Pb option, but the manufacturer documentation excerpt does not explicitly state RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not indicated for this standard-temperature device.