LM529CH - Dual Differential Comparator | Texas Instruments
料号： LM529CH ✓ 量产中LM529CH 概述
A differential comparator is an analog integrated circuit that compares two input voltages and produces a logic output indicating which input is higher. By presenting two independent differential comparator channels in one package, the LM529CH supports compact designs that require two comparisons within one device. Its high-speed differential-comparator positioning makes it relevant to legacy signal-conditioning, timing, and pulse-processing systems where a discrete implementation would consume more board area.
The principal device characteristics include TTL-compatible output behavior, a typical output current of 55 mA at 5 V, and a maximum average bias-current specification of 30 µA. The two-element configuration provides useful economy in circuits requiring paired comparisons. Because the LM529CH is a commercial-temperature component, its specified operating range of 0°C to 70°C is suitable for room-temperature commercial equipment rather than industrial-temperature environments extending beyond 70°C.
The LM529CH belongs to the comparator hierarchy within analog integrated circuits: comparator, differential comparator, analog comparator, and integrated circuit. Its differential structure means the decision depends on the relationship between two sensed voltages rather than a single input referenced only to ground. The TTL output provides a bridge to digital logic, allowing a comparison result to influence counters, flip-flops, control logic, or other digital stages when voltage-level and timing requirements are satisfied.
Typical uses include legacy pulse-width and timing circuits, zero-cross or threshold detection, window-comparison functions using both comparator channels, signal conditioning between analog sensors and TTL logic, and maintenance or modernization of equipment originally designed around a TO-100-10 comparator. In a window detector, the two channels can establish upper and lower thresholds, while a single channel can handle a simpler threshold decision. The original circuit must still be checked for output polarity, logic levels, timing margins, and unused-channel treatment.
The most important design consideration is preserving the legacy package and pin functions during replacement or board reuse. The TO-100-10 metal-can outline is not interchangeable with common SOIC or MSOP packages, so a modern comparator may require a PCB redesign. Confirm the device drawing and connection details in the Texas Instruments datasheet before fabrication, and ensure every unused input is biased to prevent an indeterminate output.
This product page consolidates the confirmed package, temperature, output, and electrical information for the LM529CH and adds practical selection and application guidance. It also distinguishes confirmed drop-in alternatives from generic functional substitutes, helping engineers assess whether a proposed replacement truly preserves the TO-100-10 footprint and original circuit behavior.
直接替换替代料： LM529CH ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料LM529CH 最大额定值与电气特性
| Comparator Type | High-speed differential comparator |
| Number of Elements | 2 elements |
| 输出类型 | TTL |
| Typical Output Current | 55 mA at 5 V |
| Maximum Average Bias Current | 30 µA |
| 工作温度范围 | 0°C to 70°C |
| Temperature Grade | Commercial |
| 封装 | TO-100-10 metal can |
| 安装方式 | Through-hole |
| Terminal Count | 10 terminals |
| Package Shape | Round |
| Packaging | Bulk |
LM529CH round 引脚配置指南
LM529CH（round 封装）的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据： LM529CH.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LM529CH 适用于 6 应用s: Legacy TTL threshold detection, Pulse timing and edge detection, Analog signal conditioning, Upper and lower window comparison, Industrial equipment restoration, Zero-crossing and polarity detection.
Legacy TTL threshold detection
The LM529CH can detect whether an analog signal is above or below a reference threshold and translate that decision into a TTL-compatible logic result. Its two differential comparator elements allow either two independent decisions or a two-channel arrangement. The commercial 0°C to 70°C specification suits room-temperature equipment, while the 55 mA typical output current at 5 V supports conventional TTL load requirements. Before implementation, verify the accepted input voltage range, output polarity, and propagation timing against the actual signal amplitude and system clock requirements.
Pulse timing and edge detection
The LM529CH is applicable in legacy pulse-timing systems where a differential signal must be compared with a threshold to determine timing state. Its high-speed differential-comparator architecture and TTL output can interface the result with counters or flip-flops. The two channels may be used for complementary timing or separate pulse events, subject to the device’s detailed timing and common-mode limits. Layout should minimize pickup around the through-hole leads and maintain short, defined return paths to reduce switching noise on the compared signals.
Analog signal conditioning
When a bipolar or offset analog signal must be converted into a digital decision, the LM529CH can compare the signal against a reference and produce a TTL output for downstream logic. This is useful in equipment designed around older TTL signal chains rather than modern low-voltage comparators. The dual-element configuration can process two related channels without adding two separate packages. Design the reference and input network so both remain within the manufacturer’s specified common-mode and differential ranges, and account for input offset when the threshold must be precise.
Upper and lower window comparison
The two elements in the LM529CH are suited to a window-comparison arrangement in which one channel establishes an upper threshold and the other establishes a lower threshold. The resulting TTL states can indicate whether the monitored signal lies within an accepted band. This approach is particularly relevant to legacy control and test systems with two comparator outputs. The two references should be arranged to avoid interaction through common power-supply impedance, and output polarity must be interpreted correctly in the downstream logic.
Industrial equipment restoration
The LM529CH can support restoration of legacy industrial or commercial equipment where the original TO-100-10 comparator must be serviced without redesigning the board. Its dual high-speed differential-comparator configuration preserves a compact two-channel implementation, and its 0°C to 70°C commercial rating is appropriate for controlled indoor equipment. Before ordering, confirm that the replacement is a new factory-sealed part and compare the original and current datasheet pin functions. If the equipment operates above 70°C, use a suitably rated part instead.
Zero-crossing and polarity detection
With suitable input conditioning, the LM529CH can determine signal polarity or detect a zero crossing relative to a reference. Its differential inputs allow the decision to be made against a controlled threshold instead of ground alone, which is useful when the signal has a nonzero midpoint. The TTL output can then drive an enable, direction indicator, or flip-flop in legacy equipment. The input network must preserve the comparator’s allowed common-mode range, and output polarity and saturation behavior should be confirmed for the selected reference arrangement.
工程参考数据： LM529CH ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Texas Instruments |
| Package | TO-100-10 metal can |
| Mounting Style | Through-hole |
| Comparator Type | High-speed differential comparator |
| Number of Elements | 2 elements |
| Output Type | TTL |
| Typical Output Current | 55 mA at 5 V |
| Maximum Average Bias Current | 30 µA |
| Operating Temperature Range | 0°C to 70°C |
| Temperature Grade | Commercial |
关键差异点
- Two differential comparator channels in one package （对比 Single-comparator alternatives)
- TTL output architecture （对比 CMOS-output comparators)
- Original TO-100-10 mechanical format （对比 Surface-mount comparator packages)
设计说明
Use the Texas Instruments TO-100-10 package drawing and pin-description table when creating or inspecting a footprint. The public product information confirms a 10-terminal round metal-can package but does not expose a complete terminal-name table, so lead spacing and pin functions must be checked against the manufacturer document rather than a generic TO-100 footprint. Preserve the original orientation mark on the assembled board to prevent reversed insertion.
Do not treat a modern comparator with similar differential inputs as a drop-in replacement merely because its function is equivalent. A valid replacement must also match the LM529CH terminal arrangement, TTL output levels, supply requirements, input common-mode range, timing, and polarity. A different package can introduce different lead geometry, pin functions, and propagation delay, so board-level substitution requires schematic and layout review.
Route the comparator inputs and threshold references as short, quiet nets, particularly when the two channels compare low-level or fast-changing signals. Keep the supply bypass capacitor close to the device pins and provide a low-impedance return path to reduce supply noise and common-mode pickup. Through-hole lead inductance can influence fast edges, so test the assembled board with the same external wiring and loading expected in the final equipment.
合规信息
The component is a legacy commercial-temperature analog comparator rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not confirmed in the product information.
